Краткое содержание страницы № 1
6. DVD VIDEO SYSTEM 2. PRECAUTIONS 3. HANDLING DISCS
DVD video is a high-quality digital video source To remove the disc from its storage case, press
Multi-story function Note on Discs
This equipment has been tested and found
!
WARNING
down on the centre of the case and lift the disc
that provides crisp and clear images. One 12 cm
Never stick labels on the surface of the disc or
When a DVD video contains more than one story
to comply with the limits for a Class B digi-
out, holding it carefull
Краткое содержание страницы № 2
[ON/OFF] button: (These buttons are available when •Turns the subtitle display on and off. CONTROLS / COMMANDES / CONTROLES the cover is open.) 4. CONTROLS / LES COMMANDES / CONTROLES 5. NOMENCLATURE [SELECT] button: [SEARCH MODE] button: •Finalizes a numeric entry. •Locates beginning of a section using title and Names of Buttons [ANGLE] button: chapter numbers. Control unit / Module des touches / Unidad de control [SUB-TITLE] button: •Switches the view angle when ( ) is dis- [DISP] button: C
Краткое содержание страницы № 3
Discs Speaker system We recommend that you use the type of speaker Playable discs system described below to fully enjoy the sur- This DVD video player can play the following round function of a DVD video disc system. How- discs. ever, audio CDs do not output any signals to the center speaker and the sub woofer, so you will only hear sound from the front and rear speak- Playable disc Disc size and playback time ers. Contact your dealer for further details. DVD video discs Audio+video(MPEG-2 forma
Краткое содержание страницы № 4
About the registered marks etc. • This product incorporates copyright protection “Dolby”, “Pro Logic” and duble-D symbol are technology that is protected by method claims of trademarks of Dolby Laboratories. Confidential certain U.S. patents and other intellectual prop- Unpublished Works.©1992-1997 Dolby erty rights owned by Macrovision Corporation and Laboratories,Inc. All rights reserved. other rights owners. Use of this copyright pro- • Manufactured under license from Digital Theater tection
Краткое содержание страницы № 5
7. OPERATION Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “4. CONTROLS” on page 5 (unfold). ANALOG1 (Analog1): CAUTION Use this setting when playing back an analog Be sure to lower the volume before switch- input source connected using RCA plugs. ing off the unit power or the ignition key. The unit remembers its last volume setting. If you ANALOG2 (Analog 2): switch the power off with the volume up, when Use this setting when playing back an
Краткое содержание страницы № 6
Control unit button operations Basic Operations • MONO: monaural sound • JAZZCLUB(Jazzclub):Jazz club with a low ceiling. • STEREO: stereo sound • THEATER(Theater):Movie or drama theatre. • 2/1: 2 front channels, surround monaural 2. When the [DSF] button is held down for 2 sec- • 2/2: 2 front channels, 2 channel surround onds, the original mode is resumed. sound • 3/0: sound via the 3 front channels Adjusting the sound volume bal- • 3/1: 3 front channels, surround monaural ance of each speaker
Краткое содержание страницы № 7
Remote control unit button operations DVD Operations The operations described in this chapter are per- Playing back discs formed using the remote control buttons. Press the [ ] button to start playback. Press- ing the [ ] button again stops playback. Replacing discs • When a menu is displayed, select the de- 1. Slide the door downwards until a clicking sired item in step 2 of the following sec- sound is heard. The disc is now automatically tion, “Selecting menus”. ejected. Selecting menus 1. Whe
Краткое содержание страницы № 8
Remote control unit button operations DVD Operations Pausing playback Fast forward/fast backward Press the [ ] button to pause playback. Nor- Hold down the [ ] or [ ] button during play- mal playback is resumed when the [ ] button back. is pressed again. When one of these two buttons are held down, • The disc is played back at 1/2 normal speed the speed increases after 1 sec. Normal playback when the [ ] button is pressed while disc speed is resumed when the button is released. playback is pause
Краткое содержание страницы № 9
Remote control unit button operations DVD Operations Using title menus Selecting an angle A DVD disc where scenes have been recorded A DVD disc containing multiple titles can be from different camera angles allows you to se- played back by selecting the desired title from lect the desired angle during playback. the title menu. 1. Press the [TITLE] button during playback to display the title menu. Press the [ANGLE] button during playback to change the angle. • Some DVD video discs do not allow yo
Краткое содержание страницы № 10
Remote control unit button operations DVD Operations Displaying playback status Press the [DISP] buttons during playback to change display mode. Each press of the buttons turns the playback sta- tus display on or off. • Also when the playback status display is off, pressing a button other than [ ] causes the corresponding playback status symbol to be displayed. • The following symbol may be displayed de- pending on playback status or the DVD video disc. 16 DVS9755z
Краткое содержание страницы № 11
Remote control unit button operations CD Operations The operations described in this chapter are per- Stopping playback formed using the remote control buttons. Press the [ ] button to stop playback. • Press the [ ] button to start playback Replacing discs from the location where playback was pre- 1. Slide the door downwards until a clicking viously stopped. sound is heard. • When the [ ] button is pressed again after The disc is now automatically ejected. the disc has been stopped, the disc is
Краткое содержание страницы № 12
Control unit button operations Setting acoustic features (ADJUST MODE) In this chapter, the control unit buttons are used. •A flow chart is shown on the next page. *1. The display shows the settings made in the Section, “Changing display settings” (11 Selecting adjust mode settings page). Adjust the settings to suit your sound system. *2. When an is displayed at the end of a 1. Press the [ADJUST] button to enter the AD- setting, press the [ENT] button to enter the JUST MODE. adjust mode. 2. Pre
Краткое содержание страницы № 13
Control unit button operations Setting acoustic features (ADJUST MODE) *1 *2 *3 *4 *7 *5 *7 *6 DVS9755z 19
Краткое содержание страницы № 14
Control unit button operations Setting acoustic features (ADJUST MODE) - Adjusting automatic sound format but use the [ON ] setting when this provides a better effect for low frequency range. identification (FORMAT) This function automatically identifies the sound 5. Press the [ADJUST] button to return to the original mode. format of the inserted disc and plays back the disc accordingly. Adjusting speaker output level • The initial value is [AUTO]. (SP-GAIN) 1. Press the [ADJUST] button to ente
Краткое содержание страницы № 15
Control unit button operations Setting acoustic features (ADJUST MODE) sound of all speakers reach the listening posi- • SRD HPF: high pass filter for the surround tion at the same time as the sound from the front speakers speakers. • SW LPF: low pass filter for the subwoofer • The initial value is [0 ms]. 5. Press the [ ] or [ ] [VOL] button to select • The delay time setting is a Dolby digital and the frequency. Dolby surround function. • In case of [F HPF], [CTR HPF] and [SRD • A speaker that
Краткое содержание страницы № 16
Control unit button operations Setting acoustic features (ADJUST MODE) This button is used to turn [Dolby PL] mode GAIN: adjusts the output level. [ON] and [OFF]. • Adjustments are made in the range -12 6. Press the [ADJUST] button to return to the dB to +12 dB. original mode. • Holding down the [ ] or [ ] [VOL] but- ton to increase or decrease the value con- Setting parametric equalizer (P.EQ) tinuously. The parametric equalizer function allows you to adjust the frequency characteristics to
Краткое содержание страницы № 17
Remote control unit button operations Making menu language and other settings This setting menu is displayed on the monitor. Setting the menu language The menu can be selected using the supplied The DVD video menus can be displayed in the remote control unit. language of your choice. 1. Display the [MENU LANGUAGE] submenu Selecting monitor menus according to steps 1 to 4 in the Section, “Se- 1. Press the [ ] button to pause playback. lecting monitor menus”. 2. Press the [MENU] button to display
Краткое содержание страницы № 18
Remote control unit button operations Making menu language and other settings 4. Press the [RTN] button twice to return to the Setting screen size original playback mode. Set the size of the connected TV monitor. 1. Display the [MONITOR SETTING] submenu Setting parental level according to steps 1 to 4 in the Section, “Select- The parental level is a function that allows you ing monitor menus”. to restrict the viewing of certain contents. Make 2. Press the top or bottom of the [JOG] button to thi
Краткое содержание страницы № 19
Remote control unit button operations Making menu language and other settings Setting the country code Enter the country code when the parental level function is to be used. Note: • When the country code setting is changed, eject the DVD video and insert it again. 1. Display the [COUNTRY CODE] submenu ac- cording to steps 1 to 4 in the Section, "Select- ing monitor menus". MENU LANGUAGE AUDIO LANGUAGE CREDIT TTL LANGUAGE PARENTAL LEVEL TV SCREEN COUNTRY CODE 8 5 8 3 SET AFTER ENTERING 10
Краткое содержание страницы № 20
8. IN CASE OF DIFFICULTY Problem Cause Measure Power does not Replace with a fuse 3A of the same amperage. If the Fuse is blown. turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Consult your store of purchase. Incorrect wiring. Press the reset button with a thin rod. The microprocessor has malfunctioned due to noise, etc. Reset button Nothing happens Press the reset button with a thin rod. The microprocessor has when buttons are malfunctioned due to noise, press
