Руководство по эксплуатации Pioneer V7400

Краткое содержание страницы № 1

PIONEER V7400 DVD PLAYER
REMOTE CONTROL PANEL SOFTWARE

Written by Dejan Seke
Email: seked@yahoo.com

August 2002.

Краткое содержание страницы № 2

INSTALATION 1. Make a folder on any drive (i.e. C:\DVDinstall) 2. Make subfolder called Support (i.e. C:\DVDinstall\Support) 3. Unzip root.zip to made folder 4. Unzip sub.zip to made subfolder 5. Run setup.exe from main folder DESCRIPTION The Pioneer DVD V7400 Remote Control Panel software gives independent manual control of up to four DVD V7400 players. The players are connected to a PC through its com ports. Player’s hardware buttons and functions of the interface at the

Краткое содержание страницы № 3

DESCRIPTION All the controls and DVD information are independent for each DVD player. A. DVD Number with DVD Title By double clicking a DVD control frame (but not the controls on it) a widow will pop-up allowing naming and editing DVD title. Up to 20 characters allowed. B. Start Time Sets the time that will make DVD player go to play mode. If incorrect time was entered, once the box loses focus (by pressing anything else), its background will turn orange. Timer has one-second

Краткое содержание страницы № 4

H. Step Mode Control Selects Frame or ½ Play speed mode for Step Reverse/Step Forward buttons. DVD’s Rev Step/Rev Play mode has to be set to Frame (available in DVD menus) I. Title/Chapter Control Controls Title/Chapter selection and displays current Title and Chapter number J. Cue Control Consists of three items: Go To Button, Time Box and Frame Box. The program does not allow entering frame number and time in the same time. Typing time will automatically delete Frame Box and vice versa