Краткое содержание страницы № 1
Register your product and get support at
www.philips.com/welcome
DVP4320
ZH-CN 3
EN User manual 19
Краткое содержание страницы № 2
Contents 7 Additional information 33 1 Important 20 Update software 33 Safety and important notice 20 Care 34 Trademark notice 20 34 2 Your product 21 8 Troubleshooting 35 Feature highlights 21 Product overview 21 9 Glossary 36 3 Connect 22 Connect video cables 22 Connect audio cables 23 Route audio to other devices 23 24 Connect power 24 4 Get started 24 Prepare the remote control 24 Find the correct viewing channel 24 Select menu display language 25 Turn on progressive scan 25 Use Philips
Краткое содержание страницы № 3
Your product contains batteries covered by the 1 Important European Directive 2006/66/EC, which cannot be disposed with normal household waste. Safety and important notice Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for Warning the environmental and human health. Risk of overheating! Never install the product in a Copyright notice around the product for
Краткое содержание страницы № 4
b 2 Your product Turn on this product or switch to standby mode. Congratulations on your purchase, and welcome to c IR sensor Point the remote control at the IR sensor. offers, register your product at www.philips.com/ welcome. d jack Feature highlights e Stop play. Philips EasyLink Your product supports Philips EasyLink, which uses f the HDMI CEC (Consumer Electronics Control) Start, pause or resume disc play. protocol. EasyLink-compliant devices that are Remote
Краткое содержание страницы № 5
a 3 Connect Turn on this product or switch to standby mode. Make the following connections to use this product. b Basic connections: Switch to the USB mode. Video c DISC MENU Audio Access or exit the disc menu. Optional connections: Switch to the disc mode. Route audio to other devices: For VCD and SVCD, turn on or off PBC (playback control). Analog stereo system d Navigate the menus. Search fast-forward ( ) or fast-backward Note ( ). Search slow-forward ( ) or slow-
Краткое содержание страницы № 6
Option 1: Connect to the HDMI jack Option 3: Connect to the AV OUT jack 1 Connect the supplied AV cables to: the AV OUT jack (3.5mm) on this product. the video input jack on the TV. HDMI IN IDE V IN O 1 Connect an HDMI cable (not supplied) to the HDMI OUT jack on this product. the HDMI input jack on the TV. Tip Note The video input jack on the TV may be labeled as A/V IN, VIDEO IN, COMPOSITE or BASEBAND. If the device supports HDMI CEC, you can control This type of connection prov
Краткое содержание страницы № 7
Connect power DIGI TA L IN Caution Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. Before connecting the AC power cord, ensure you have completed all other connections. Note 1 Connect a coaxial cable (not supplied) to: The type plate is located on the bottom of the product. the COAXIAL jack on this product. the COAXIAL/DIGITAL input jack on 1 Connect the AC power cable: the device. to this product. Connect ana
Краткое содержание страницы № 8
3 Press to select [Video Setup]. Select menu display language 4 Select [Progressive] > [On], then press OK. » A warning message is displayed. Note 5 To proceed, select [Ok] and press OK. » The progressive setup is complete. If this product is connected to a HDMI CEC compliant TV, skip this setting. It switches automatically to the same OSD menu language as per your TV setting (if the Note language set on TV is supported by this product). If a blank/distorted screen is displayed, wait for 1
Краткое содержание страницы № 9
One-touch standby Play video 1 Press the STANDBY button to switch this product to standby. Note » All the connected devices (if the device supports one-touch standby) automatically Some operations may not work with some discs. See the switch to standby. information accompanying the disc for details. Note Control video play Philips does not guarantee 100% interoperability with all 1 Play a title. HDMI CEC devices. 2 Use the remote control to control the play. Button Action Start, pause or r
Краткое содержание страницы № 10
Access VCD menu View DVD play from different angles The PBC (playback control) feature is available for 1 During play, press INFO. VCD/SVCD, which can display the contents menu » The disc status menu is displayed. for you to select a play option. The PBC is on by 2 Select [Angle], then press . default in the factory. 3 Press the Numeric buttons to change the angle. Note » Play changes to the selected angle. See “Adjust settings” > [Preferences] > [PBC] on how to turn PBC on or off. Note A
Краткое содержание страницы № 11
Play music Play photo Control a track Play photo as slideshow 1 Play a track. extensions). 2 Use the remote control to control the play. 1 Insert a disc or USB that contains the JPEG Button Action photos. » Slideshow begins (for Kodak disc), or a Start, pause or resume disc play. contents menu (for JPEG disc) is displayed. Stop disc play. 2 Select a photo folder, then press OK to start Skip to a previous/next track. , slideshow. Select an item to play. To previ
Краткое содержание страницы № 12
Play musical slideshow 6 Adjust settings Create a musical slideshow to play MP3/WMA Note Note If the setup option is grayed out, it means the setting cannot be changed at the current state. To create a musical slideshow, you must store the MP3/ 1 Play MP3/WMA music. General setup 2 Press BACK to return to the main menu. 3 Navigate to the photo folder/album and press OK to start slideshow play. » Slideshow begins and continu
Краткое содержание страницы № 13
[Auto standby] [LPCM Output] - Select the LPCM (Linear Turn on or off automatically standby. Pulse Code Modulation) output sampling rate. [On] - Switch to standby 15 minutes of [48kHz] - For discs recorded at sampling inactivity (for example, in pause or stop mode). rate of 48 kHz. [Off] - Disable the auto standby mode. [96kHz] - For discs recorded at sampling rate of 96 kHz. [DivX(R) VOD Code] ® Display the DivX registration code. Note Tip [LPCM Output] setting is only available if the
Краткое содержание страницы № 14
[Off] - Turn off CD-upsampling. [4:3 Pan Scan] - For 4:3 screen TV: full-height [88.2kHz (X2)] - Convert to twice the original display with the trimmed sides. sampling rate. [4:3 Letter Box] - For 4:3 screen TV: wide- [176.4kHz(X4)] - Convert to four times the screen display with black bars on the top and original sampling rate. bottom of the screen. [16:9] - For wide-screen TV: display ratio 16:9. [Night Mode] Make loud sound level softer and soft sound level [Progressive] louder so tha
Краткое содержание страницы № 15
Option Description Note [One Touch When you press and hold the If the setting is not compatible with the TV, a blank Standby] STANDBY button, all connected screen appears. Wait for 15 seconds for auto recover or switch to its default mode as follows: HDMI CEC devices switch to 1) Press to open the disc compartment. standby mode simultaneously. 2) Press numeric button ‘1’. To disable this feature, select [Off]. [Wide Screen Format] screen format for disc play. Note Option Descri
Краткое содержание страницы № 16
Note Note If the language you have set is not available on the disc, the disc uses its own default language. a new password. For some DVDs, the subtitle/audio language can only change from the disc menu. [DivX Subtitle] To select the languages that are not listed in the menu, select [Others]. Then check the Language Code list at Select a character set that supports the DivX the back of this user manual and enter the respective subtitle. language code. - [Parental control] Note Restri
Краткое содержание страницы № 17
Video format 4 Visit www.philips.com/support to check for Digital compression: the latest software version. DVD/SVCD/VCD/DivX 5 Refer to the upgrade instructions on the Horizontal resolution: website for more information. DVD: 720 pixels (50 Hz); 720 pixels (60 Hz) Note VCD: 352 pixels (50 Hz); 352 pixels (60 Hz) Disconnect the power cord for a few seconds and connect again to turn on the product. Vertical resolution: DVD: 576 pixels (50 Hz); 480 pixels (60 Hz) VCD: 288 lines (50
Краткое содержание страницы № 18
No picture on HDMI connection. Type: Semiconductor laser InGaAIP (DVD), If this product is connected to an unauthorized AIGaAs (CD) display device with an HDMI cable, the audio/ Wave length: 658 nm (DVD), 790 nm (CD) video signal may not be output. Output Power: 7.0 mW (DVD), 10.0 mW Check if the HDMI cable is faulty. Replace a (VCD/CD) new HDMI cable. Beam divergence: 60 degrees If this happens when you change the HDMI video resolution, you have to switch to its default mode: 1) Pres
Краткое содержание страницы № 19
P with the digital receiver. PBC Playback Control. A system where you navigate is not supported by this product (e.g. NTFS). through a Video CD/Super VCD with on-screen menus that are recorded onto the disc. You can enjoy interactive playback and search. 9 Glossary Progressive scan The progressive scan displays twice the number of frames per second than in an ordinary TV system. It A offers higher picture resolution and quality.
Краткое содержание страницы № 20
Language Code Abkhazian 6566 Inupiaq 7375 Pushto 8083 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Italiano 7384 Raeto-Romance 8277 Amharic 6577 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Javanese 7486 Samoan 8377 Assamese 6583 Avestan 6569 Kalaallisut 7576 Sango 8371 Aymara 6589 Kannada 7578 Sanskrit 8365 Azerhaijani 6590 Kashmiri 7583 Sardinian 8367 Bahasa Melayu 7783 Kazakh 7575 Serbian 8382 Bashkir 6665 Kernewek 7587 Shona 8378
