Краткое содержание страницы № 1
MODEL W1687
3 HP DUST COLLECTOR
INSTRUCTION MANUAL
Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@woodstockint.com
COPYRIGHT © JUNE, 2002 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
Printed in Taiwan
Краткое содержание страницы № 2
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities con- tains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of w
Краткое содержание страницы № 3
MAINTENANCE NTRODUCTION SAFETY ELECTRICAL ASSEMBLY OPERATIONS CLOSURE TABLE OF CONTENTS PAGE 1. INTRODUCTION ................................................................................2 About Your New Dust Collector ......................................................2 Woodstock Service And Support ......................................................2 Warranty And Returns ..................................................................3 Machine Specifications..........................
Краткое содержание страницы № 4
INTRODUCTION About Your New Dust Collector ® Your new Shop Fox Model W1687 has been specially designed to provide many years of trouble-free ser- vice. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. The Model W1687 Dust Collector features a 3 HP motor which provides air movement of 2830 cubic feet per minute and a static pressure of 14.4". It also features two cyclone collectors, (4) 19" x 33" filter/col- lection bags, a fo
Краткое содержание страницы № 5
NTRODUCTION NTRODUCTION Warranty And Returns ® Woodstock International, Inc. warrants all SHOP FOX machinery to be free of defects from workman- ship and materials for a period of 2 years from the date of original purchase by the original owner. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, lack of maintenance, or to repairs or alterations made or specifically authorized by anyone other than Woodstock International, Inc. ® Woodstoc
Краткое содержание страницы № 6
SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. This symb
Краткое содержание страницы № 7
SAFETY 13.Use correct tool. Do not force machine or attachment to do a job for which it was not designed. 14. Wear proper apparel. Do not wear loose clothing, neck ties, gloves, jewelry, keep long hair tied up, etc. 15. Remove adjusting keys and wrenches. Before turning the machine on, make it a habit to check that all adjusting keys and wrenches have been removed. 16.Use proper extension cord. Examine the extension cord to ensure it is in good condition. Use the chart below to determine the cor
Краткое содержание страницы № 8
Additional Safety Instructions For Dust Collector 1. Do not use dust collector for anything except wood dust. Materials such as liquids, metal shav- ings, metal dust, screws, glass, plastic or rock can cause sparks when coming into contact with any part of the collection system. 2. Ground your dust collector along all plastic components. The connection of bare 12 ga. copper wire on all plastic hoses, fittings and blast gates to all machines will help reduce the occurrence of static build up and
Краткое содержание страницы № 9
SAFETY Avoiding Potential Injuries Figure 1. Never collect anything except wood dust. Figure 2. Keep hands away from impeller. Figure 3. Wear a respirator when changing bags. Figure 4. Unplug machine when changing bags. Figure 5. Do Not remove impeller guard. -7-
Краткое содержание страницы № 10
ELECTRICAL REQUIREMENTS 220V Operation ® The Shop Fox Model W1687 requires a 220V sin- Any electrical receptacle gle-phase power source for operation. Also, you and circuit that you plug will need a NEMA-style L6-20 plug as shown in your machine into must be Figure 6. The motor supplied with your new grounded. Never remove machine is rated at 3 HP and will draw approxi- the grounding pin from any mately 18 amps during 220 volt operation. When plug and always make sure choosing a receptacle for
Краткое содержание страницы № 11
ASSEMBLY ASSEMBLY INSTRUCTIONS Unpacking It is absolutely critical that The Model W1687 has been carefully packaged you read and understand for safe transporting. If you notice the machine this entire instruction has been damaged or is missing any parts, manual before performing please contact Woodstock International Service MODEL W1687 any operations with your 3 HP DUST COLLECTOR and Support at 1-360-734-3482 or send e-mail machine. Serious personal to: tech-support@woodstockint.com. injury may
Краткое содержание страницы № 12
Component Layout Figure 6. Model W1687 components laid out for identification. ® The following is a description of the components shipped with the Shop Fox Model W1687 Dust Collector. We recommend that all parts be laid out in a similar fashion to those in Figure 7. This will help in identification before beginning assembly. Should any part appear to be missing, examine the packaging carefully. If any key parts are missing call Woodstock International, Inc. at 360-734-3482 or contact us via tech
Краткое содержание страницы № 13
ASSEMBLY Clean Up Never use flammables The exposed, unpainted surfaces of the machine such as gas or other petro- have been coated with an oil to prevent rust leum-based solvents to during shipment. This oil needs to be removed clean your machine. before operation. To remove the oil, we recom- These products have low mend using a solvent based degreaser. Avoid flash points and present using any chlorine based solutions because they the risk of explosion and will damage the painted surfaces. Alwa
Краткое содержание страницы № 14
General ® While the main components of the Shop Fox Model W1687 are assembled at the factory, some assembly is required. The following is the recommended sequence best suited for final assembly. TOOLS REQUIRED: You will need a 12mm open end wrench and a Phillips head screwdriver. Base Figure 8. Mounting the casters to the base. Position the base upside down to reveal the caster mounting brackets. Attach each of the (4) casters to the caster mounting brackets using 5 1 (16) /16"-18 x /2" hex bol
Краткое содержание страницы № 15
ASSEMBLY Impeller/Motor Assembly The impeller/motor assembly consists of the fan assembly, switch, motor, and power cord. These are preassembled at the factory. Set the impeller/motor assembly on top of the base so the intake portion is near the edge of the base plate and the bolt holes are aligned with one another as shown in Figure 9. Attach the impeller/motor assembly to the base with (4) 5 1 ⁄16" - 18 x ⁄2" bolts. Figure 9. Mounting the impeller/motor to the base. Outlet Duct Insert the squ
Краткое содержание страницы № 16
Collectors The (2) collectors attach to each of the outlet duct flanges and are later secured to the base with the support bracket assemblies. The inside of the collectors are cone shaped to force the air around in a circular motion. Be sure that the inside taper (cone) is pointing downward and that the collector inlet flange faces the outlet duct flange. Insert one of the rubber gaskets between the outlet duct flange and the collec- 5 1 tor flange. Secure with (8) ⁄16"-18 x ⁄2" bolts as shown i
Краткое содержание страницы № 17
ASSEMBLY Collection Bags There are (4) collection bags on the Model W1687. The upper bags can be identified by the ® SHOP FOX logo. The upper bags are secured to the collector bodies by threaded band clamps and the lower bags are secured by quick-release band clamps. 1. Fasten the upper bags to the collector bod- ies by threading the bolts and locknuts through each band clamp as shown in Figure 14. Figure 14. Securing the upper bag threaded 2. Fasten the lower bags to the collector bod- band cl
Краткое содержание страницы № 18
4-Way Inlet Fitting Slide the 4-way inlet fitting over the flange on the impeller/motor assembly as shown in Figure 17. Line up the screw hole on the inlet with the threaded hole on the impeller/motor assembly and secure with the included sheet metal screw. Figure 17. Securing the 4-way inlet fitting. -16- ASSEMBLY
Краткое содержание страницы № 19
ASSEMBLY System Grounding Static electricity is generated by the collision of dust particles as they travel through dust collec- tion ducting. Plastic ducting acts as an insulator, allowing the static charge to build. The build-up of electricity will eventually discharge to the nearest available grounding source. The dis- charge will be in the form of a spark (arc) of electricity that has the potential to ignite air- borne dust, causing a fire or explosion hazard. Therefore, your dust collection
Краткое содержание страницы № 20
ure below shows some options to consider. Material Selection There are also many kinds of pure plastic flexi- As shown in Figure 21, there are several differ- ble hose, such as non-perforated drainage type ent options to choose from when deciding on a hose and dryer vent hose. Drainage type hose, duct material. Variables such as ease of use, while being economical, does not have the flex- cost, availability, and your specific shop, all ibility required for dust collection. The inside of play a
