Краткое содержание страницы № 1
M M..3 30 04 4
PROFESSIONAL DJ MIXER
OWNER’S MANUAL
STANTON MAGNETICS, INC
information@stantondj.com
www .stantondj.com
Краткое содержание страницы № 2
WELCOME! Thank you for making Stanton your Stanton and your authorized Stanton first choice in professional DJ mix- dealer are dedicated to your com- ers. plete satisfaction by offering bench- mark service and support throughout This innovative family of mixers has the long life of your Stanton product. been developed with input from the professional DJ community, bringing We appreciate your patronage, and a previously unavailable, combina- look forward to many years of mak- tion of user-fri
Краткое содержание страницы № 3
M.304 FEATURES When Stanton set out to design its new M.304 3- Channel DJ Mixer, compro- mise was not an option. This 10" professional mixer boasts a wide range of intu- itive controls, superb sound, and high-quality components including a genuine Penny & Giles crossfader. Whether mixing house, tech- no or trance from vinyl or CDs, the M.304 has got all the bases covered, thanks to 3 phono inputs, 6 line inputs and 2 mic inputs with independent EQ. Each channel sports gain control, bright input
Краткое содержание страницы № 4
DESCRIPTION OF FUNCTIONS
Краткое содержание страницы № 5
DESCRIPTION OF FUNCTIONS 1. Microphone 1 input - This combo (1/4”/XLR) connector is used to connect a microphone. The volume is controlled by the MIC 1 knob. 2. Microphone 2 input - This 1/4” connector is used to connect a microphone. The volume is controlled by the MIC 2 knob. 3. Mic 1 level - Controls the input level of Microphone input 1. 4. Mic 2 level - Controls the input level of Microphone input 2. 5. Mic equalizer - Individual controls for high frequency, midrange, and low frequency equ
Краткое содержание страницы № 6
DESCRIPTION OF FUNCTIONS 18. Master output level - Controls the overall output level of the mixer. 19. Output meters - These LEDs let you know if the audio coming out of the mixer is loud enough (or too loud!). If the LEDs reach the red, the mixer is probably clipping, or distorting. 20. Input selectors - These toggle switches select the input source between phono and line for each channel. 21. Input gains - Controls the input sensitivity level of each channel. An LED meter is provided on eac
Краткое содержание страницы № 7
DESCRIPTION OF FUNCTIONS Power: This is the power switch to turn the mixer "ON" or "OFF" AC IN: This is the Input connection for the included power supply. Send and Return: These connectors are used to connect an outboard signal processor (such as the Stanton DFX-1). Connect a 1/4” mono cable from the SEND output to the Line In on your signal processor. Connect the RETURN input to the Line Out on your signal processor. Your effects loop should now be working. Check it by turning the send and ret
Краткое содержание страницы № 8
FADER CLEANING AND REPLACEMENT After constant use the M.304 faders may need to be cleaned and lubri- cated from time to time. This will ensure long life and keep a smooth feeling throughout the fader's lifetime. Follow the instructions below to lubricate and clean your faders: Removing a fader: 1. Make sure mixer is powered off and power supply is disconnected from back of mixer. 3. Remove the fader to be cleaned or replaced by unscrewing the 2 outer screws on the fader plate (removing the 2 in
Краткое содержание страницы № 9
FADER CLEANING AND REPLACEMENT ing all traces of dirt and contamination. 4. Remove the fader track (G) by slowly withdrawing from the A unit. Place fader track on desk or working surface with black contacts facing upwards. If necessary, the track can be washed in warm water, wiped gently then dried thor- oughly using a dry cloth. Use a lint free cloth or swab to wipe the tracks and check for marks along the track. (Note: Lint free cloth should be used to avoid B dust/fibers being deposited on th
Краткое содержание страницы № 10
TECHNICAL SPECIFICATIONS Line Inputs: 2 (RCA) x 3 channels, -10 dBV /10 kOhm Phono Inputs 2 (RCA) x 3 channels, -50 dBV / 47 kOhm Mic Inputs 1(1/4")/ 1 XLR -50 dBV /4.7 kOhm Return Inputs 2 (1/4"), -10 dBV / 10 kOhm Send Outputs 2 (1/4"), -10 dBV Master Outputs 2 (1/4”) Balanced/ (RCA) unbalanced, -2 dBu balanced / -10 dBV unbalanced Record Outputs 2 (1/4”) Balanced/ (RCA) unbalanced, -2 dBu balanced / -10 dBV unbalanced Booth Outputs 2 (1/4”) balanced, -2 dBu / 100 Ohms Headphone Output 1 (1/4
Краткое содержание страницы № 11
WARRANTY Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement Warranty Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) following the date of original purchase.
