Краткое содержание страницы № 1
TANDBERG 1000
TANDBERG 550
for Cisco CallManager
User Manual
Software version H1/I1
D13293-02
This document is not to be reproduced in whole or in part
without permission in writing from:
Краткое содержание страницы № 2
TANDBERG 1000/550 for Cisco CallManager Trademarks and copyright COPYRIGHT © 2004, TANDBERG Philip Pedersensvei 22 1366 Lysaker, Norway, Tel: +47 67 125 125, Fax: +47 67 125 234 All rights reserved. This document contains information that is proprietary to TANDBERG. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying, or otherwise, without the prior written permission of TANDBER
Краткое содержание страницы № 3
TANDBERG 1000/550 for Cisco CallManager Operator Safety Summary For your protection, please read these safety instructions completely before operating the equipment and keep this manual for future reference. The information in this summary is intended for operators. Carefully observe all warnings, precautions and instructions both on the apparatus and in the operating instructions. Equipment Markings The lightning flash symbol within an equilateral triangle is intended to alert the user to the
Краткое содержание страницы № 4
TANDBERG 1000/550 for Cisco CallManager Contents Introduction..............................................................................................7 Menu structure ........................................................................................8 Installation ................................................................................................9 Precautions .............................................................................................................9 Co
Краткое содержание страницы № 5
TANDBERG 1000/550 for Cisco CallManager Placing a Call .............................................................................................................................. 16 Answering a Call ......................................................................................................................... 16 Ending a Call ............................................................................................................................... 16 General Use...............
Краткое содержание страницы № 6
TANDBERG 1000/550 for Cisco CallManager Wireless LAN Settings......................................................................................................... 27 TFTP Settings ...................................................................................................................... 28 DNS Settings ....................................................................................................................... 28 Audio Settings .........................................
Краткое содержание страницы № 7
TANDBERG 1000/550 for Cisco CallManager Introduction This User Manual is provided to help you make the best use of your TANDBERG unit. The TANDBERG 550/1000 for Cisco CallManager offers superior audio and video quality in a fully-featured unit. Application features · Delivers the ultimate visual communication experience, with video quality developed by TANDBERG for business video applications · Full range of Cisco IP telephony functions, including Directory and Call Control, as supported by th
Краткое содержание страницы № 8
TANDBERG 1000/550 for Cisco CallManager Menu structure menu The on-screen menu structure is shown below. Press MENU to enter or leave the Main Menu. Main Menu Calls Services Directory Settings Messages Exit View Missed Status Calls System Status Received Network Calls Settings Call Status Placed Audio Calls Settings View Current Settings Corporate Video Directory Settings Restore Default Settings Data Port Settings TFTP Settings IP Camera Settings Brightness DNS Monitor Settings Brightness Wi
Краткое содержание страницы № 9
TANDBERG 1000/550 for Cisco CallManager Installation Installation Precautions Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch uninstalled telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines. Avoid using a telephone (other than a cordless type) during a
Краткое содержание страницы № 10
Installation TANDBERG 1000/550 for Cisco CallManager Power Cable Connect the power supply to the ‘DC in’ input on the system. Connect the power cable to the power supply. Connect the power cable to an electrical distribution socket. LAN Cable Connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN. Wireless LAN - Insert PC Card Remove the “dummy” card by pressing the ‘Eject’ button next to the slot. Insert the Wireless LAN PC Card. MAKE SURE YOU INSERT THE CARD
Краткое содержание страницы № 11
TANDBERG 1000/550 for Cisco CallManager Installation Connecting Your TANDBERG 550 for Cisco CallManager System Camera Microphone Codec Remote Control 11
Краткое содержание страницы № 12
Installation TANDBERG 1000/550 for Cisco CallManager Microphone Cable Connect the microphone to the microphone cable. Connect the microphone cable to the microphone input on the TANDBERG 550 for Cisco CallManager. Monitor Cable(s) Scart (Europe): Connect the Scart adapter to one of the Scart connectors on your monitor. Scart (Europe) & RCA/S-Video (US): Audio: The cable with one RCA connector on one side and two RCA connectors on the other side: Connect the two RCA connectors to your m
Краткое содержание страницы № 13
TANDBERG 1000/550 for Cisco CallManager Installation Power Cable Connect the power supply to the ‘DC in’ input on the system. Connect the power cable to the power supply. Connect the power cable to an electrical distribution socket. LAN Cable To use the system on LAN, connect a LAN cable from the ‘Ethernet’ connector on the system to your LAN. Wireless LAN - Insert PC Card Remove the “dummy” card by pressing the ‘Eject’ button next to the slot. Insert the Wireless LAN PC Card. NOTE
Краткое содержание страницы № 14
Getting started TANDBERG 1000/550 for Cisco CallManager Getting Started Before You Begin Chances are, your system administrator or a technician will connect your new TANDBERG unit to the corporate IP network. If that is not the case, please make sure that the system administrator has registered your unit on the Cisco Call Manager. Welcome Screen When turning on your TANDBERG unit, the following screen will appear. This screen provide you with the telephone number(s) assigned to your unit. Soft
Краткое содержание страницы № 15
TANDBERG 1000/550 for Cisco CallManager Getting Started Remote Control The remote control is used to handle calls and to navigate the graphical user interface. Quick keys The three buttons on top of the remote control refer to the blocks at the bottom of the screen. The text inside the blocks will change depending on which menu is selected and the state of the call. The three Quick keys have different colors. Camera control and menu navigation keys Frequently used keys allowing you to control
Краткое содержание страницы № 16
Getting started TANDBERG 1000/550 for Cisco CallManager Handling Calls Placing a Call There are three ways to place a call: A. Use the NewCall softbutton. A dialing tone is heard and the desired number can be entered. To delete a digit, use the << soft-button. To cancel the number entry, use the EndCall softbutton or press DISCONNECT. When the required number of digits has been entered the call will proceed automatically. B. Just start entering the number using the number keys. No dialing tone
Краткое содержание страницы № 17
TANDBERG 1000/550 for Cisco CallManager General use General Use Adjusting Volume Press the VOLUME keys to adjust the volume level. An on-screen indicator will show the current level. + - View Outgoing Video (Selfview) selfview Press the SELFVIEW key to view your outgoing video. To change the image being viewed on the monitor during a call press SELFVIEW once. move pip Press MOVE PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to switch it off. Microphone
Краткое содержание страницы № 18
General use TANDBERG 1000/550 for Cisco CallManager On Screen Symbols The system has a number of symbols signalling different settings. Indicates that the volume is turned off on the system. Indicates that the microphone is muted/turned off. Indicates that there is one or more new voice mail messages pending. Controlling the Camera Moving / zooming Camera To control the Camera use the keys below: for pan/tilt and for zooming. zoom OK THE TANDBERG 1000 FOR CISCO CALLMANAGER CAMERA IS EQUIPPED W
Краткое содержание страницы № 19
TANDBERG 1000/550 for Cisco CallManager Advanced Use Advanced Use Main Menu menu The menu system can be used to select available functions and utilities for the system. To enter the menu system and the main menu, press the MENU key. You may leave the menu system at any time by pressing the MENU key. A MENU STRUCTURE MAP IS PROVIDED IN THE TIP SECTION ‘MENU STRUCTURE’ IF NO SPEED DIALS ARE ASSIGNED TO YOUR UNIT NOTE THE COLUMN MARKED ‘SPEED DIALS’ WILL NOT BE SHOWN. SIMILARLY, IF A SECOND EXTEN
Краткое содержание страницы № 20
Advanced Use TANDBERG 1000/550 for Cisco CallManager INSTEAD OF USING THE NUMBER KEYS TO ACCESS THE LINES OR SPEED DIALS YOU CAN HIGHLIGHT THE DESIRED FIELD USING THE NAVIGATION KEYS ON TIP THE REMOTE CONTROL AND THEN PRESS OK. Calls The calls menu shows the state of the current calls. If you are in multiple calls, use the up/down navigation keys on the remote to ‘select’ a call. The three softbuttons on the screen will change according to the state the selected call is in. TIP THE CALLS MENU
