Краткое содержание страницы № 1
WDR COLOR CCD CAMERA with
DAY & NIGHT
INSTRUCTION MANUAL
SHC-721N/P/PH
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SALES NETWORK
•
SAMSUNG TECHWIN., LTD
• SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
Optics & Digital Imaging Division
Closed Circuit Division
145-3, Sangdaewon 1-Dong, Jungwon-Gu,
40 Seaview Drive, Secaucus N.J
Sungnam, Kyungki-Do, Korea
07094, U.S.A
462-121
TEL : (201) 902-0347
TEL : 82-31-740
Краткое содержание страницы № 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION -Th
Краткое содержание страницы № 3
Краткое содержание страницы № 4
Contents 8 21 Precautions Operating Your Camera Configuration of The Menu 21 Setting Up The Menu 22 Composition 10 23 • Camera ID • Backlight 26 Name and Function of Each Part 11 • White Balance 27 Front 11 • Motion Detection 28 Side 12 • Lens Selection 32 Bottom 13 33 • Shutter Speed Control Back 14 • Sense up 34 • Color(Day / Night) 35 36 15 • Synchronization Mode Connection • Special 38 Lens 15 40 • Installing Auto Iris Lens Using Remote Jack / MD Output • Installing C/CS-Mount Lens 41 Troubl
Краткое содержание страницы № 5
Краткое содержание страницы № 6
Краткое содержание страницы № 7
Name and Function of Each Section Side Bottom Tripod Mounting Hole Auto Iris Lens Connector Used to install the camera on an optional Used to connect Auto Iris Lens plug. tripod. The tripod must be equipped with the screw specified as shown below. DC/VIDEO Selection Switch Used to choose DC or VIDEO 1/4"-20 UNC (20 THREAD) L according to the type of your Auto L:4.5mm±0.2mm (ISO standard), Iris Lens. or 0.197" (ASA standard) Menu Setup Buttons Cover Tripod Mounting Bracket Menu Setup Buttons
Краткое содержание страницы № 8
Name and Function of Each Section Connection LENS Back The lens is not supplied with this camera. Purchase a lens suitable for your Video Output Jack Remote Jack environment. This camera accepts the auto iris lens and both C-and CS-mount lens. Used to connect an external Used to connect a remote plug. video monitor in jack. Notes Power LED If the lens is marked with fingerprints or other marks, the image quality might be poor. It is recommended to use a high quality lens to improve the image
Краткое содержание страницы № 9
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens Installing C/CS-Mount lens cable to the plug as shown below. Before mounting a lens, please check whether it is a C-mount or CS-mount lens. • Video type : •DC type : No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - The back focus is set for the CS-mount lens at the factory. No. 2 Pin --- N.C No. 2 Pin --- Damping + • Mounting a CS-Mount lens No. 3 Pin --- White (Video signal) No. 3 Pin --- Drive +
Краткое содержание страницы № 10
Краткое содержание страницы № 11
Краткое содержание страницы № 12
Operating Your Camera Setup Setting Up The Menu Select the function using Camera ID OFF Change the status using Backlight WDR the UP or DOWN button. the LEFT or RIGHT button. Use the five Setup Menu buttons on side of the camera. White Bal. W-ATW Motion Det. OFF Lens DC Shutter OFF Sense up OFF Color Auto1 UP button Sync. INT Special LEFT button End SET button 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'End' a
Краткое содержание страницы № 13
Краткое содержание страницы № 14
Краткое содержание страницы № 15
Operating Your Camera S-ATW(Special Auto Tracking White balance): When color temperature is This feature is useful when you have to monitor several screens simultaneously. 1800~6000K, specially in sodium lamp, select this mode. (EX. sodium lamp, inside the Whenever your camera detects motion of object displaying ‘Motion Detected’ tunnel) with the number counted up on the screen. H-ATW(High Auto Tracking White balance): If there are bright and dark parts 1. Press the SET button to display the set
Краткое содержание страницы № 16
Operating Your Camera · Move the arrow indicator to 'Top' using the UP or DOWN button and increase · After setting, move the cursor to edge in any direction and then press the button or decrease the value using the LEFT or RIGHT button. Repeat the procedure just one more, let ‘End’ brink. for bottom, left and right. · Press the SET button. 18 6 Notes Tips on Using the Motion Detection Feature 13 5 • As you increase or decrease MD Level, the areas’ sensitivity is increased or decreased for objec
Краткое содержание страницы № 17
Краткое содержание страницы № 18
Краткое содержание страницы № 19
Operating Your Camera 1.Press the SET button to display the setup menu and move the arrow Setup indicator to ‘Sync.’ using the UP or DOWN button. Camera ID OFF Backlight WDR 2. Set ‘Sync.’ to the desired mode using the LEFT or RIGHT button. White Bal. W-ATW INT: Internal synchronization Motion Det. OFF Lens DC L/L: External line-lock synchronization Shutter OFF Sense up OFF Color Auto1 Setup Sync. INT Camera ID OFF Backlight WDR White Bal. W-ATW 3. Press the SET button. Motion Det.
Краткое содержание страницы № 20
