Краткое содержание страницы № 1
HIGH RESOLUTION
COLOR CCD CAMERA
INSTRUCTION MANUAL
SDC-415 SERIES
Please read this manual carefully before installing and using the product.
SALES NETWORK
•SAMSUNG TECHWIN CO., LTD. •SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)
Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong, Closed Circuit Division 40 Seaview Drive, Secaucus NJ 07094,
Jungwon-Gu, Sungnam, Gyeonggi-do, Korea 462-703 U.S.A
TEL: 82-31-740-8137~41 FAX: 82-31-740-8145 TEL : (201) 902-0347 FAX: (201) 902-0429
•SAMSUNG OPT
Краткое содержание страницы № 2
■ Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SDC-415 SERIES • NTSC MODELS • PAL MODELS SDC-415ND SDC-415PD The lightning flash with an arrowhead symbol, within an equilateral triangle is SDC-415NA SDC-415PA intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclo
Краткое содержание страницы № 3
Warning Features The camera needs periodic inspection. Horizontal Resolution 530 TV High Sensitivity Lines Contact an authorized technician for inspection. Clear image quality has been achieved by The built-in high sensitivity SONY COLOR employing a SONY CCD with 410,000 CCD enables a clear image even in (effective) pixels, which provides a 0.3Lux(0.1Lux B/W) or lower illumination. Stop using your camera when you find a malfunction. horizontal resolution of 530 TV lines. If you use your camera
Краткое содержание страницы № 4
■ ■ ■ ■ ■ ■ ■ ■ ■ Contents Camera operation 20 4 Features Menu 20 5 Warnings and precautions Settings 21 • LENS (selection) 22 Components 10 • SHUTTER (condition and speed control) 24 • WHITE BALANCE control 25 Names and functions of parts 11 • BACKLIGHT (Backlight Compensation) Front 11 26 Side 12 • AGC (Auto gain compensation) 27 Bottom 13 • SSNR (Samsung Super Noise Reduction) 27 Back 14 • SENS-UP 28 • SPECIAL 30 15 Installation • EXIT 35 Lens 15 • Using auto iris • Using C/CS mount lens Trou
Краткое содержание страницы № 5
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. Only use the camera under conditions It can cause the image quality to be where temperatures are between -10°C poor. It can cause malfunctions to occur. It can damage the CCD. and +50°C. Be especially careful to provide ventilation when
Краткое содержание страницы № 6
Components Names and Functions of Parts Front 1. COLOR CCD CAMERA SDC-415 SERIES 2. Auto iris lens connection plug 3. C-Mount adaptor Lens protection cap Please cover the lens when not using it. C-Mount lens adaptor Please attach the C-Mount lens here. 4. Instruction manual CS-Mount lens adaptor Please remove the C-MOUNT lens adaptor and then attach it. Back Focus clamp screw Please loosen the clamp screw with a screwdriver before adjusting the Back Focal length. COLOR CCD CAM
Краткое содержание страницы № 7
Names and Functions of Parts Side Bottom Mounting bracket screw hole L Please use the screw hole when fixing the camera onto the mounting bracket. Please use the clamp screw as specified below. 1/4"-20 UNC (20 THREAD) L:4.5mm±0.2mm (ISO standard), The mounting bracket can be separated and attached or 0.197" (ASA standard) to the top of the camera. In this instance please do not tighten the Auto iris lens connector screw to a depth of more than 5mm, otherwise serious damage can occur
Краткое содержание страницы № 8
Names and Functions of Parts Installation ■ Lens Back Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used. Note • Use of the DC auto iris lens is recommended to achieve the best results for operating this product effectively. • Please keep the lens clean. • Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions. When using an auto iris lens 1. Please peel off about 8mm of the
Краткое содержание страницы № 9
Installation 3. Please remove the cover of the auto iris lens connection plug and solder the When using a C-Mount lens lens cable to the connector pin in the plug. Please take off the lens protection cap and attach LENS Pin No. the C-Mount lens to the camera by screwing it in DC VEDIO clockwise. No.1 Pin Damping- Red(power) No.2 Pin Damping+ NC C-mount adaptor No.3 Pin Drive+ White(video signal) No.4 Pin Drive- Black(GND) When using a CS-Mount lens Lens cable 1. Please take off the lens protect
Краткое содержание страницы № 10
Ω ■ Ω Ω ■ Installation Connecting to a monitor Connecting to power Each model has a different power input specification. Please connect the video output terminal located on the back of the camera to Please check the model type and standard power requirement before the monitor. connecting to power. AC Power Type (AC 24V, 500mA) CCD Camera Monitor DC Power Type (DC 12V, 500mA) • The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for e
Краткое содержание страницы № 11
■ ■ Camera Operation Menu Settings Settings can be made using the 5 buttons located on the side of the camera. SETUP menu LENS (selection) • MANUAL • DC / VIDEO UP button SHUTTER • ESC • MANUAL • FLK LEFT button (condition and speed control) SETUP button WHITE BALANCE control • ATW • AWC • MANUAL RIGHT button DOWN button BACKLIGHT • OFF • LOW • MIDDLE (Backlight compensation) • HIGH 1. Please press the SETUP button • Settings can now be made. The SETUP menu is displayed on the AGC (Auto Gain con
Краткое содержание страницы № 12
Camera Operation SETUP DC/VIDEO : Auto iris lens selection Select any function you LENS MANUAL Modes can be changed wish to operate by SHUTTER ESC using the LEFT and Note using the UP and WHITE BAL. ATW RIGHT buttons. BACKLIGHT OFF DOWN buttons. • When using an auto iris lens, the setting of the auto iris lens selection AGC LOW switch, located on the back of the camera, must be on DC or VIDEO SSNR LOW depending on the type of the lens which is being used. (Please refer to the SENS-UP OFF SPECIAL
Краткое содержание страницы № 13
Camera Operation WHITE BALANCE control SHUTTER (condition and speed control) The screen color can be adjusted by using the WHITE BALANCE function. Auto or manual control can be selected. 1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by 1. When the SETUP menu is on the screen, please position the arrow to point to 'SHUTTER' by using the DOWN button. using the UP and DOWN buttons. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT 2. Please select
Краткое содержание страницы № 14
Camera Operation BACKLIGHT(Backlight Compensation) AGC (Auto Gain Control) 1. Please position the arrow to point to 'AGC' on the SETUP menu by using When there is a strong backlight behind the object, clear images of the background as well as the object can still be obtained by using the BACKLIGHT the UP and DOWN buttons. function. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by button. As the
Краткое содержание страницы № 15
Camera Operation 1. Please position the arrow to point to 'SENS UP' on the SETUP menu by SSNR (Samsung Super Noise reduction) using the UP and DOWN buttons. The background noise in the low light level decreases automatically as the 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button. level of gain changes. AUTO : Low light level auto mode OFF : The function does not operate. 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DO
Краткое содержание страницы № 16
Camera Operation 3) Please press the SETUP button. SPECIAL Camera ID 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by ABCDEFGHIJKLM using the UP and DOWN buttons. NOPQRSTUVWXYZ abcdefghijklm 2. Please select the mode you wish to operate by pressing the UP or DOWN nopqrstuvwxyz button. -. 123456789 SPECIAL CLR POS END CAMERA ID OFF COLOR ON 4) Up to 15 letters can be used for the ID. SYNC INT Please move the cursor to the letter you wish to choose by using the UP and
Краткое содержание страницы № 17
Camera Operation 5) When a name has been chosen, please select a position for the name display. Note Please move the cursor onto 'POS' and then press the SETUP button. • When the AGC is turned off, COLOR does not operate. Camera ID • When an infrared light is used, there may be a problem with focusing. ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL nopqrstuvwxyz LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
Краткое содержание страницы № 18
Camera Operation • Please select the area you do not wish to appear from the 4 areas in AREA SEL mode. MOTION DETECTION: This product has a feature that allows you to observe movements of objects in 4 • Please select ON mode for the chosen area. different areas on the screen, and the words 'MOTION DETECTED' appear on the • Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT screen when movement is detected; hence a single individual can conduct or RIGHT button. supervi
Краткое содержание страницы № 19
Ω Troubleshooting If there are problems in operation, please refer to the items below. If the Problems Troubleshooting problem persists, please contact the agent you purchased this product from. The MOTION • Please check if 'MOTION DETECTION' mode is DETECTION function is turned on. Problems Troubleshooting not working. • Please check if the MD LEVEL is too low. Nothing appears on the • Please check the power connection. • Please check the setting of the MD AREA. screen. • Please
Краткое содержание страницы № 20
Ω Ω DECLARATION OF CONFORMITY Specifications Application of Council Directive(s) 89 /336 /EEC Item SDC-415NA SDC-415ND SDC-415PA SDC-415PD Manufacturer's Name SAMSUNG TECHWIN CO., LTD AC24V, 60Hz DC12V AC24V, 50Hz DC12V Manufacturer's Address SAMSUNG TECHWIN CO., LTD Power Source 3.5W(Max) 2.5W(Max) 3.5W(Max) 2.5W(Max) 42, SUNGJU-DONG CHANGWON-CITY, Total Pixels 811(H) x 508(V) 795(H) x 596(V) KYUNGNAM, KOREA, 641-120 C C Effective Pixels 768(H) x 494(V) 752(H) x 582(V) European Representative
