Краткое содержание страницы № 1
Quick Start
Guide
Краткое содержание страницы № 2
CONTENTS Step 1: Unpacking ................................................ 1.3 Step 2: Installing the Toner Cartridge .................. 1.5 Step 3: Loading Paper .......................................... 1.7 Changing the Size of the Paper in the Paper Tray .. 1.9 Step 4: Connecting Telephone Line .................... 1.11 Step 5: Connecting a Printer Cable ..................... 1.12 For Local Printing .............................................1.12 For Network Printing (WorkCentre PE120i on
Краткое содержание страницы № 3
English Step 1: Unpacking 1 Remove the machine and all accessories from the packing carton. Make sure that the machine has been packed with the following items: NOTES: • The appearance of the power cord and the telephone line cord may differ depending on your country’s specifications. • The CD-ROMs contains the Xerox printer driver, Scan drivers, ControlCentre, the User’s Guide, and the Adobe Acrobat Reader program. • For the WorkCentre PE120i, the PS Driver CD-ROM is supplied with your m
Краткое содержание страницы № 4
2 Remove the packing tape from the front, back, and sides of the machine. Tape 3 Gently pull the scan lock label until it comes away from the machine. This will pull the scanner locking switch into the FORWARD (Unlocked) position automatically. Scan Lock Label NOTE: When you are moving the machine or do not intend to use it for a long period of time, move the scanner locking switch BACKWARD to the lock position, as shown. To scan or copy a document, the switch must be unlocked. 1.4 SETTI
Краткое содержание страницы № 5
English Step 2: Installing the Toner Cartridge 1 Open the front door. 2 Remove the starter toner cartridge from its bag. Gently shake the cartridge 5 or 6 times to distribute the toner. Thoroughly shaking the cartridge will assure maximum copies per cartridge. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. CAUTIONS: • To prevent damage, do not expose the toner cartridge to light for more than a few minutes
Краткое содержание страницы № 6
3 Hold the toner cartridge by the handle. Slowly insert the cartridge into the opening in the machine. Tabs on the sides of the cartridge and corresponding grooves within the machine will guide the cartridge into the correct position until it locks into place completely. Groove Tab 4 Close the front door. Make sure that the door is securely closed. NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of approximately 3,500 for the Standard-Capacity Print Cartridg
Краткое содержание страницы № 7
English Step 3: Loading Paper The paper tray can hold a maximum of 250 sheets of 20 lb (75 2 g/m ) plain paper. To load a stack of Letter-sized paper: 1 Pull open the paper tray and remove it from the machine. 2 Fan the edges of the paper stack to separate the pages. Then tap the stack on a flat surface to even it up. 3 Insert the paper stack into the paper tray with the side to be printed on facing down. NOTE: If you want to load a different sized paper, you need to adjust the paper guides
Краткое содержание страницы № 8
4 Pay attention to the paper limit mark on both inside walls of the tray. Paper overloading may cause paper jams. 5 Insert and slide the paper tray back into the machine. 1.8 SETTING UP YOUR PRINTER
Краткое содержание страницы № 9
English Changing the Size of the Paper in the Paper Tray To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper tray. 1 After pressing and unlatching the guide lock, slide the paper length guide out completely to extend the paper tray to its full length. 2 After inserting paper into the tray, squeeze the length guide and slide it until it lightly touches the end of the paper stack. SETTING UP YOUR PRINTER 1.9
Краткое содержание страницы № 10
For paper smaller than Letter size, adjust the front paper length guide so that it lightly touches the paper stack. 3 Squeeze the width guide, as shown and slide it to the stack of paper until it lightly touches the side of the stack. NOTES: • Do not push the paper width guide far enough to cause the materials to warp. • If you do not adjust the paper width guide, it may cause paper jams. 1.10 SETTING UP YOUR PRINTER
Краткое содержание страницы № 11
English Step 4: Connecting Telephone Line Plug one end of the supplied telephone line cord into the LINE jack on the machine and the other end into the wall jack. To the wall jack If you want to use your machine to receive both faxes and voice calls, you will need to connect a telephone and/or answering machine to your machine. Plug your phone or answering machine cord into the EXT jack, as shown below. To a phone or answering machine SETTING UP YOUR PRINTER 1.11
Краткое содержание страницы № 12
Step 5: Connecting a Printer Cable For Local Printing To print from your computer in a local environment, you need to connect your machine to a computer with either a Universal Serial Bus (USB) cable or a parallel cable. NOTE: You only need to connect one of the cables mentioned above. Do not use the parallel and the USB cables at the same time. Using a USB Cable NOTE: If you are using a USB cable, you must be running Windows 98/Me/2000/XP. 1 Make sure that both the machine and the computer
Краткое содержание страницы № 13
English Using a Parallel Cable NOTE: Connecting the machine to the parallel port of the computer requires a certified parallel cable. You need to buy an IEEE-1284 compliant parallel cable that is 3 m or less in length. 1 Make sure that both the machine and the computer are turned off. 2 Connect the parallel cable to the parallel connector on your machine. Push the metal clips down to fit inside the notches on the cable plug. 3 Connect the other end of the cable to the parallel interface po
Краткое содержание страницы № 14
For Network Printing (WorkCentre PE120i only) You can attach your machine to a network using an Ethernet cable (UTP cable with RJ.45 connector). The WorkCentre PE120i has a built-in network interface card. 1 Make sure that both the machine and the computer are turned off. 2 Plug one end of the Ethernet cable into the Ethernet network port on your machine. 3 Plug the other end of the cable into a network LAN connection. NOTE: After connecting the machine, you need to configure the network p
Краткое содержание страницы № 15
English Step 6: Turning the Machine On 1 Plug one end of the supplied three-pronged electrical cord into the AC socket on the machine and the other end into a properly grounded AC outlet. 2 Press the power switch to turn the machine on. “Warming Up Please Wait” appears on the display indicating that the machine is now on. To the AC wall jack To view your display text in another language, see page 1.16. CAUTIONS: • The fuser area inside the rear door of your machine becomes very hot when
Краткое содержание страницы № 16
Step 7: Changing the Display Language To change the language that displays on the control panel, follow these steps: 1 Press Menu until “Machine Setup” appears on the top line of the display. 2 When “Language” appears on the bottom line of the display, press Enter. The current setting appears on the bottom line of the display. 3 Press the scroll button ( or ) until the language you want appears on the display. 4 Press Enter to save the selection. 5 To return to Standby mode, press Stop/
Краткое содержание страницы № 17
English Step 8: Installing Xerox Software in Windows System Requirements Before you begin, ensure that your system meets the minimum requirements. Item Requirements Recommended Operating Windows 98/Me/NT 4.0/2000/XP system Windows 98/ Pentium II 400 Pentium III 933 Me/NT 4.0/ MHz or higher MHz 2000 CPU Pentium III 933 Pentium IV 1 Windows XP MHz or higher GHz Windows 98/ Me/NT 4.0/ 64 MB or higher 128 MB 2000 RAM 128 MB or Windows XP 256 MB higher Windows 98/ 300 MB or Me/NT 4.0/ 1 GB Fre
Краткое содержание страницы № 18
Installing Xerox Driver CD For Windows 2000 or XP connecting via USB port: 1 Mark sure that your machine is turned on and connected to your computer’s USB port before inserting Drivers CD. 2 The “New Hardware Found” window will appear when your computer boots up. 3 Insert the supplied Drivers CD into your computers CD drive. 4 Follow the on screen instructions to complete the software installation. For more detailed instructions, see User Guide. NOTES: • For Windows NT 4.0/98/Me, see instru
Краткое содержание страницы № 19
English Step 9: Viewing the User’s Guide The User’s Guide, which is in Adobe Acrobat PDF format, comes with your machine in the supplied EUG CD-ROM. The manual will provide you flexibility and convenience in accessing information. You can view the manual on-screen in different formats (viewing a single page, continuous single page or continuous facing page, zooming in up to 1600% or out up to 12.5%, scrolling two-up page or article flow). You can also print the manual, if necessary. To vie
Краткое содержание страницы № 20
MEMO 1.20 SETTING UP YOUR PRINTER
