Краткое содержание страницы № 1
DOME TYPE NETWORK CAMERA
INSTRUCTIONS
VN-C655
(B)
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No. VN-C655
Serial No.
LW40710-001B
VN-C655(B)_In_Cover 3 05.3.16, 1:19 PM
Краткое содержание страницы № 2
Safety Precautions Due to design modifications, data given in this FOR USA AND CANADA instruction book are subject to possible change without prior notice. CAUTION RISK OF ELECTRIC SHOCK WARNING: DO NOT OPEN TO REDUCE THE RISK OF FIRE OR CAUTION:TO REDUCE THE RISK OF ELECTRIC ELECTRIC SHOCK, DO NOT SHOCK. DO NOT REMOVE COVER (OR EXPOSE THIS APPLIANCE TO RAIN BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO OR MOISTURE. QUALIFIED SERVICE PERSONNEL. AVERTISSEMENT: The lightning flash wis
Краткое содержание страницы № 3
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as t
Краткое содержание страницы № 4
Introduction Thank you for purchasing this product. (These instructions are for VN-C655U.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. Contents Contents ................................................................................................. 4 Introduction Characteristics ....................................................................................... 6 Operating Precauti
Краткое содержание страницы № 5
Step 3 Setting Using the V.Networks Controller Settings 3-1 Starting Up the V.Networks Controller ....................................... 54 3-2 Features that Allow Setting Using the V.Networks Controller .... 55 (V.Networks 3-3 Motion Detection Standby .......................................................... 57 Controller) 3-4 Image Size and Inversion .......................................................... 58 3-5 Image Quality Setting .......................................................
Краткое содержание страницы № 6
Introduction Characteristics High-speed Rotating Table Frame Rate High-speed rotating table with a horizontal Supports a maximum frame rate of 30 fps panning speed of 300˚/sec and vertical tilting when resolution is 640 x 480 in the JPEG compression format. speed of 180˚/sec makes it possible to recall a preset position quickly. Supports Multicast Optical + Electronic zooming Support for multicast enables sending of an The 25X optical zoom lens and 10X electronic image data to multiple P
Краткое содержание страницы № 7
When playing back images by connecting a If this camera or cable connected this unit is coaxial cable to the VIDEO OUT terminal, used near a location where strong electrical the image on the screen may appear shaky or magnetic waves are generated (eg. radios, (rotational motions are not smooth) when TVs, transformers, monitors, etc.), noise using the Manual or Auto Pan operation interference may occur in the image or its particularly near the Tele end. This color may be affected. phenomenon
Краткое содержание страницы № 8
Introduction Operating Precautions (continued) Preset Positions Auto Focus • The is a total of 100 preset positions that Although this camera comes with the one-push can be set, including the home position. auto focus and EASY AF auto focus features, auto focusing may sometimes be impossible • The TILT position can be set and operated depending on the object and camera settings. only between 0° to 90° even when the item When this occurs, adjust the focus manually. “FLIP” is set to ON. Object
Краткое содержание страницы № 9
Items Included Ceilling Mount Read Me First Warranty Card JVC Service CD-ROM Information Card (instruction manual inside) Cable Plate Safety Precautions Screw (M3x12 mm) Converter Unit Operating Environment PC Specifications OS : Windows 2000 Professional (SP1 or later) Windows 2000 Server Windows XP Home Edition Windows XP Professional CPU : Equivalent to or higher than Pentium 3, 500 MHz (Pentium4, 3.2 GHz recommended) Memory : 128 MB and above (1 GB recommended) Hard Disk Space : 20 MB and ab
Краткое содержание страницы № 10
Introduction Name and Function of Parts Ceiling Mount 6 5 1 4 3 2 [MONITOR OUT] Coaxial Cable Terminal [ALARM I/O]Alarm Input/Output Terminals 1 5 Output Terminal of a composite video signal Terminals for Alarm input and Alarm output. (1 Vp-p) with an output impedance of 75 Ø, to ( Page 15) ☞ be connected to video monitor, etc. Pin No. Signal Name (☞Page 17) 1 ALM OUT 1 ALARM OUT Locking Screw 2 2 ALM OUT 2 Tighten this screw to fasten the camera clamp- 3 ALM IN 1 ALARM IN ing bracket. 4 ALM I
Краткое содержание страницы № 11
Ceiling Mount Camera % 0 9 9 ! $ 7 @ 8 # (Camera Connector side) Camera Terminal (Female) Dome Cover 7 @ Connect to 0, the Male Terminal on the cam- The dome cover is fragile. Take care when era. handling it. Drop Prevention Hook Lens 8 # Attach the Drop Prevention Wire & to this hook The lens is not a replaceable item. to prevent the camera from falling. Camera Clamping Bracket $ Clamping Holes (x 4) 9 In order to clamp the camera onto the Ceiling Attach the camera to a ceiling using these M
Краткое содержание страницы № 12
Preparation Connection Examples LAN Connection VN-C655 VN-C655 LAN PC Network Connection VN-C655 VN-C655 LAN INTERNET FTP Server Images are automatically PC updated at a regular interval. PC Peer-to-Peer Connection VN-C655 Cross Cable PC 12 C655(B)_p2-22 12 05.3.16, 1:20 PM
Краткое содержание страницы № 13
Preparation Procedure Set the camera in the following procedure. Step 1 Connection/Installation Firstly, make a hole in the ceiling, followed by connecting the power cable, LAN Page 14 ☞ cable or alarm signal cable to the terminal of the ceiling mount of this camera. Next, attach the camera to the ceiling. Do not forget to attach the safety wire. Step 2 Network Settings Install the software, set the network for this camera as well as using the "VN- Page 23 C655U Setup Tool", and register the con
Краткое содержание страницы № 14
Preparation (Step 1 Connection/Installation) 1-1 Connecting Cables Cautions ● Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the embedded cover (recess bracket) is securely attached before installing the camera. ● Ensure to attach the cover for the ceiling mount. Installation is not possible without attaching the cover. In addition, the cover also prevents penetration of foreign objects into the ceiling mount. Penetr
Краткое содержание страницы № 15
3. Connection to Alarm Input/Output Terminal Connect the alarm input/output terminals to external devices such as sensors and buzzers. 1 2 Loosen the screws on both edges of the Flathead 1 Alarm Signal Screwdriver terminal block using a flathead screwdriver, Cable followed by dismantling it as shown in the left diagram. Strip the coating of the alarm signal cable by 2 3 about 4mm before inserting it into the terminal. Flathead Screwdriver Turn the screw on the side to fasten the alarm 3 signal c
Краткое содержание страницы № 16
Preparation (Step 1 Connection/Installation) 1-1 Connecting Cables (Continued) This terminal is for connecting with an alarm annunciator such as an indicator, a lamp or a buzzer. Output Requirements Alarm Device • Equivalent to NPN open collector output Connection (The output logic is set with [V.Networks Setup Example VN-C655 Tool.]) DC 12 V OUT • Allowed applied voltage: DC 12 V max. R Terminal IN • Allowed input current: 50 mA • Momentary output: 1 to 5000 ms Grounding (The duration is set w
Краткое содержание страницы № 17
5. Connection of Coaxial Cables Connecting a 5C-2V or 3C-2V coaxial cable Strip the coaxial cable according to the * diagram on the left. (Unit: mm) Polyethylene Core Wire Mesh Notes Wires • 7C-2V coaxial cables cannot be connected 7 17 directly to the terminal block. In this case, Insulation Tape make use of the 5C-2V cable as a junction cable by connecting it to this camera. Fold back the mesh wires and secure * using an insulation tape to prevent them from becoming loose and causing a short c
Краткое содержание страницы № 18
Preparation (Step 1 Connection/Installation) 1-1 Connecting Cables (Continued) 6. Connection of Conveter Unit Power cable Connect the camera to AC 24 V. Press 5mm 2. 1. Disconnect the connector from the sup- Press plied Converter Unit. 1. Connector It can be disconnected by pressing both ends Press as shown in the left figure. 3. 2. Mount the power cable to the connector. Strip the cover of the power cable (about 5 mm), while pressing down the arrow portion using a flat screwdriver, insert it
Краткое содержание страницы № 19
1-2 Attachment of Ceiling Mount Caution • Attachment of a embedded cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the embedded Ceiling cover (recess bracket) is securely attached before installing the camera. • Please refer to the instruction manual for the cover in use for details on installation of the embedded cover (recess bracket). • For more detail, please contact the JVC. Embedded Cover in Ceiling (recess bracket) 1. Attach safety wir
Краткое содержание страницы № 20
Preparation (Step 1 Connection/Installation) 1-2 Attachment of Ceiling Mount (Continued) 2. Fasten the ceiling mount to the ceiling While taking care not to catch the connection cables, attach the Ceiling Mount to the ceiling using four screws (as shown in the diagram). Use 8-32 UNC-sized (M4-sized) screws or bolts. If woodscrews are used, use those with a diameter of 4.1 mm. Notes • Be sure to use 4 screws and attach them firmly. • The seals attached to the ceiling-mount screw holes of the cei
