Руководство по эксплуатации AT&T BWX560

Краткое содержание страницы № 1

BWX560 Users Manual and Installation Instructions

BWX560 Camera Users Manual and
Installation Instructions

Safety Warning
1. Handle the camera with care.
Be careful when handling the camera, do not drop it or subject
it to strong shock or vibration to prevent any damages to it. Do
not disassemble it or place it on an unstable base.
2. Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio tra

Краткое содержание страницы № 2

BWX560 Users Manual and Installation Instructions Specification Pickup Device: 1/3 inch interline transfer B/W CCD Picture Element: 768x494 (EIA)752x582 (CCIR) Horizontal resolution: 560 TV lines Sensitivity: 0.01 lux/F=1.2 S/N ratio: Over 48 dB Electronic shutter: 1/60(1/50)~1/100,000 sec Auto. Iris: Video / Direct Drive switch Flickerless: On/Off Back Light Comp: On/Off Electronic Shutter: On/Off Auto Gain Cont

Краткое содержание страницы № 3

BWX560 Users Manual and Installation Instructions Major Parts Names and Their Functions 1. Focal Length Adjustment Ring Use this ring to adjust the appropriate focal length according to the type of lens. Rotate the ring clockwise for the CS-mount lens, rotate it counterclockwise for the C-mount lens. The factory setting is C-mount. 2. Lens Mount To mount an appropriate C-mount or CS-mount lens. 3. Locking Screw 3

Краткое содержание страницы № 4

BWX560 Users Manual and Installation Instructions Use the locking screw to fix the focal length. 4. Lens Connector (4 pin socket) To connect to the lens plug of the auto iris lens. 5. Control Switches There are 6 control switches located on the sideboard, which are for the setting of the special features. The switches in orders are for Flickerless, Back Light Compensation, Electronic Shutter, Automatic Gain Control, Line-Lock and Auto Iris

Краткое содержание страницы № 5

BWX560 Users Manual and Installation Instructions 6. IRIS Level Control Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens. • Turn counterclockwise to L to get darker picture. • Turn clockwise to H to get brighter picture. 7. V-Phase Adjustment Screw The vertical phase may require adjustment to synchronize the vertical phase of the camera with other camera in the system when it is to be used in the l

Краткое содержание страницы № 6

BWX560 Users Manual and Installation Instructions Installation Instructions 1. Remove the cover cap from the top of the lens mount. 2. To attach a C-mount/CS-mount lens, turn the focal length adjustment ring to the appropriate position. Note: If a C-mount lens is used, please make sure the focal length adjustment ring is set at C position before fixing the lens. 3. Screw the lens firmly onto the lens mount. Insert the lens plug in the lens c