Краткое содержание страницы № 1
ENG
ENG FRE GER SPA ITA
SCC-A2333(P)
SCC-A2033P
DIGITAL COLOR CAMERA
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsungsecurity.com
Краткое содержание страницы № 2
Safety information 10. W e CAUTION RISK OF ELECTRIC SHOCK. CAUT DO NOT OPEN 1. D s CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.. 2. D 1 This symbol indicates high voltage is present inside. It is dangerous to make any kind of 3. If contact with any inside part of this product. o 4. R This symbol alerts you that important literature concerning operation and maintenance c has been included with
Краткое содержание страницы № 3
ENG Safety information 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock. CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibrationor magnetic interference. 2. Do not install in a location subject to high temperature (over 50°C), low temperature (below - 10°C), or high humidity. Doing so may cause fi re or electric shock. d of 3. If you want to relocate t
Краткое содержание страницы № 4
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifi ers) that produce heat. 9. Do not defeat the safety purpose
Краткое содержание страницы № 5
ENG Contents Introduction Features 6 PRODUCT & ACCESSORIES 7 Part Names and Functions 8 Installation Connecting the Auto Iris Lens Connector 11 Mounting the lens 11 Connecting cables and checking operation 12 How to use OSD Menu Using Icons in the Menu 13 es wide Main Menu 13 sult Profi le 14 Camera Setup 16 Intelligence 22 Privacy Zone Setup 24 Other Set 25 Communication 26 System Information 26 Language 26 Specifi cations Specifi cations
Краткое содержание страницы № 6
Introduction FEATURES PRO ❖ High Resolution ❖ P � This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies. � ❖ Intelligent Motion Detection & Tracking � This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it sounds an alert if an object passes / enters /exits the virtual fence or virtual area. ❖ XDR (eXtended Dynamic Range) � Actively controls the gamm
Краткое содержание страницы № 7
ENG Introduction PRODUCT & ACCESSORIES ❖ Product & Accessories and � Main Product t e. ra Camera � Accessories Camera Holder(Mount) C Mount Adapter User’s Manual Auto Iris Lens Connector t English – 7
Краткое содержание страницы № 8
Introduction ❖ R PART NAMES AND FUNCTIONS ❖ Side View Mount Adapter Fixing Grooves Auto Iris Lens Camera Lens Connector Auto Iris Lens Control Cable � Auto Iris Lens Connector This groove is used for screwing the mount adapter, a part of the bracket where the camera will be installed. � Auto Iris Lens Control Cable This cable transmits the power and signals from the camera for controlling the Auto Iris Lens. � Mount Adapter Fixing Grooves These grooves are used when fi xing screws of the mount a
Краткое содержание страницы № 9
ENG Introduction ❖ Rear Panel alled. ing English – 9
Краткое содержание страницы № 10
Introduction Input/Output Connector CO This connector has input and output ports for RS-485 control signals, DAY/NIGHT switching, and alarm CO output signals. No. Function Description 1 ALARM OUT Alarm out port for motion detection. (Open collector type) 2 GND Grounding Port. 3 GND Grounding Port. This is a port for selecting an external high speed shutter mode. 4 SHUTTER (S0) If connected in LOW (0V), it will become ON inside. This is a port for selecting an external high speed shutter mode.
Краткое содержание страницы № 11
ENG Installation CONNECTING THE AUTO IRIS LENS MOUNTING THE LENS CONNECTOR When using the CS lens Mount the CS lens by rotating it clockwise as shown in the picture: CS lens Connect each uncovered shutter control cables to the Auto Iris Lens Connector as the following When using the C lens Pin DC Control After mounting the C-mount adapter by rotating it Video Control Type No. Type clockwise, turn the C lens clockwise until it is fi xed as shown in the picture. 1 Damp(-) Power (+12V) 2 Damp(
Краткое содержание страницы № 12
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1. ALA A 5. 2. 6. 34 . . 78 . 5V AY/ I I 1. ALARAM OUT 5. SHUTTER(S1) 2. GND 6. SHUTTER(S2) 3. GND 7. 5V OUT 4. SHUTTER(SO) 8. DAY/NIGHT IN R M OUT SHUTTER(S1) GND SHUTTER(S2) GS N H D UTTER(SO) . D OUN T GHT N Installation CONNECTING CABLES AND USI CHECKING OPERATION � E ③ Finally connect the power adapter to the ① Connect one end of the BNC cable to the B camera. You can connect 2 lines of the power VIDEO OUT Port on the rear of the camera. sa adapter to t
Краткое содержание страницы № 13
ENG How to use OSD Menu USING ICONS IN THE MENU MAIN MENU � (EXIT) MAIN MENU Exits the menu setting. PROFILE Before you exits the menu setting, select SAVE to wer CAMERA SET save your settings, or select QUIT to cancel. INTELLIGENCE PRIVACY ZONE � (RET) OTHER SET Returns to the previous menu. COMMUNICATION SYSTEM INFO � (HOME) LANGUAGE Returns to the main menu. � (SAVE) Used to save your settings of MASK AREA, � PROFILE PRIVACY ZONE and more. Once you save your settings, th
Краткое содержание страницы № 14
How to use OSD Menu PROFILE PROFILE Pr M STANDARD ITS W BACKLIGHT DAY/NIGHT GAMING CUSTOM In the PROFILE menu, you can confi gure the following camera settings at once. CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Previous Sub-menus Menu IRIS ALC ALC ALC ALC ALC ALC -- --- LENS DC DC DC DC DC D LEVEL 0 0 0 0 0 BACKLIGHT OFF OFF BLC OFF OFF MOTION (F.FAST)--- (F.FAST)--- NORM (F.FAST)--- SLOW ❖ IT DNR MID MID MID MID MID It w SHUTTER OFF AUTO1/250 OFF OFF OFF SENS-UP AUTOx4 AUTO
Краткое содержание страницы № 15
ENG How to use OSD Menu CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING Previous Sub-menus Menu WHITE DAY DAY/NIGHT DAY DAY/NIGHT DAY BAL DAY -- --- MODE ATW2 ATW1 ATW1 ATW1 ATW1 RED 00 000 BLUE 0 0 0 0 0 NIGHT - - - - - User setting User setting User setting BRIGHTNESS MID MID allowed allowed allowed MODE OFF ATW2 OFF ATW2 OFF User setting User setting User setting RED 0 0 allowed allowed allowed User setting User setting User setting BLUE 0 0 allowed allowed allowed DETAIL 2 2 2 2
Краткое содержание страницы № 16
How to use OSD Menu ❖ CAMERA ID [OFF, ON] CAMERA SETUP CAMERA ID CAMERA SET ABCDEFGHIJKLMNOPQRSTUVWXYZ0 ② 123456789 :?-+*()/ CAMERA ID OFF IRIS ALC MOTION (F.FAST)--- DNR MID SP SP LOCATION SHUTTER OFF CAMERA-1.................. SENS-UP AUTO X4 ........................... FLICKERLESS (OFF)--- XDR MID The CAMERA ID menu is used for you to assign a unique name to a camera. If you press the SETUP switch with the CAMERA ID menu DAY/NIGHT AUTO selected, you
Краткое содержание страницы № 17
ENG How to use OSD Menu The LEVEL menu is used to adjust the ② In similar to ALC setting, you can specify the overall brightness, where “+” will increase the BLC area. brightness and “–” will decrease it. ELC ② If you set the BACKLIGHT option to BLC, LEVEL [00]----I---- you will see a menu where you can set the BACKLIGHT BLC BLC area. AREA USER you can set the desired BLC zone by defi ning the size and location. ALC LENS DC LEVEL [00]-
Краткое содержание страницы № 18
How to use OSD Menu ❖SHUTTER AGC FIX [OFF, AUTO 1/100(PAL:1/120), AUTO 1/250, LEVEL [01] AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO 1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K , EXT] The SHUTTER menu is used to set the fi xed high-speed electronic shutter, auto high speed No electronic shutter and external high speed – electronic shutter(EXT). You can select one of 7 options from 1/100(PAL:1/120) – to 1/10K for the fi xed
Краткое содержание страницы № 19
ENG How to use OSD Menu ❖FLICKERLESS [OFF, ON] 1/2000 ON OFF ON If set to ON, the shutter speed will be fi xed to UTO 1/4000 OFF ON ON 1/100(PAL:1/120) second. This will prevent possible screen 0, distortion due to a mismatch between the vertical sync 1/10K ON ON ON frequency and the blinking frequency of the lighting. Note : d Note : – If the IRIS function is set to ELC, the Flickerless menu will – If IRIS mode is set to ELC, the SHUTTER menu will be be deactivated. If the SHUTTER men
Краткое содержание страницы № 20
How to use OSD Menu � AUTO � NI MASK AREA The camera will automatically switch between U DAY and NIGHT mode, according to the lighting b condition. lu If If you press the SETUP switch with an AUTO- based sub menu selected, you will see the b appropriate screen. if D AUTO In BURST OFF B You can specify Mask 1 and 2 simultaneously. DAY NIGHT d BRIGHTNESS MID The mask is used only for determining the fi lter DWELL TIME 2S switch and any ex
