Краткое содержание страницы № 1
3-990-921-11 (1)
Network Camera
User’s Guide
Software Version 1.0
SNC-RZ50N/RZ50P
© 2005 Sony Corporation
Краткое содержание страницы № 2
For customers in the U.S.A. (SNC-RZ50N Owner’s Record only) The model and serial numbers are located on the bottom. Record these numbers in the spaces provided below. This device complies with Part 15 of the FCC Rules. Refer to these numbers whenever you call upon your Operation is subject to the following two conditions: Sony dealer regarding this product. (1) This device may not cause harmful interference, and (2) this device must accept any interference Model No. ____________________ r
Краткое содержание страницы № 3
ATTENTION NOTICE TO USERS The electromagnetic fields at specific frequencies may © 2005 Sony Corporation. All rights reserved. This influence the picture of the unit. manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to For the customers in Netherlands any machine readable form without prior written approval from Sony Corporation. Voor de klanten in Nederland Gooi de batterij niet weg, maar lever SONY CORPORATION PROVIDES NO hem in
Краткое содержание страницы № 4
Controlling Day/Night Function .........................26 Playing the Audio File Stored in the Camera ....27 Table of Contents Switching TCP/UDP Transmission Mode ..........27 Overview Administrating the Camera Features .................................................................. 6 Basic Operations of Administrator Menu .........29 How to Use This User’s Guide .............................. 7 How to setup the Administrator menu ..............29 Precautions ................................
Краткое содержание страницы № 5
Common Tab — Setting the image memory Using the Custom Homepage Installer ..............82 function ..........................................................55 Uploading the homepage to the camera using the Alarm recording Tab — Setting the Image Custom Homepage Installer ...........................82 memory function when detecting the alarm ... 56 Assigning the IP Address to the Camera Using Periodical recording Tab — Setting the periodical ARP Commands .....................................
Краткое содержание страницы № 6
Overview If you use the CF card slot, insert the Sony wireless card You should keep in mind that the images or audio SNCA-CFW1 (optional) in it. If you use the PC card you are monitoring may be protected by privacy slot, use with a commercially available Compact Flash and other legal rights, and the responsibility for Type II-PCMCIA converting adaptor. making sure you are complying with applicable laws is yours alone. Image transmission using an e-mail or Access to the images and aud
Краткое содержание страницы № 7
Overview How to Use This User’s Precautions Guide This Sony product has been designed with safety in mind. However, if not used properly electrical products This User’s Guide explains how to operate the SNC- can cause fires which may lead to serious body injury. RZ50N/RZ50P Network Camera from a computer. To avoid such accidents, be sure to heed the following. The User’s Guide is written to be read on the computer Heed the safety precautions display. As this section gives tips on using the U
Краткое содержание страницы № 8
Overview System Requirements These are the requirements for the computer that displays the image or controls the camera. Processor Intel Pentium 4, 1.5 GHz or higher (Pentium 4, 2.4 GHz or higher recommended) RAM 256 MB or more OS Microsoft Windows 2000, Windows XP Web browser Microsoft Internet Explorer Ver.6.0 or later 8 System Requirements
Краткое содержание страницы № 9
Preparation Assigning an IP address using the Preparation Setup Program 1 Insert the supplied CD-ROM disc into your CD- The Preparation section explains what the administrator ROM drive. has to prepare for monitoring images after installation After a short time a window will open displaying and connection of the camera. the files on the CD-ROM. 2 Click the Setup icon of IP Setup Program. The “File Download” dialog opens. Assigning the IP 3 Click Open. Address to the Camera Note To connect t
Краткое содержание страницы № 10
Preparation 6 Click on the camera in the list to which you want to Secondary DNS server address in the relevant assign a new IP address. boxes. The network settings for the selected camera are Note displayed. The Third DNS server address and Fourth DNS server address are invalid for this camera. 7 Set the IP address. 9 Set the HTTP port No. To obtain the IP address automatically from a DHCP server: Select Obtain an IP address automatically. Normally, select 80 for the HTTP port No. To use a
Краткое содержание страницы № 11
Preparation Tip Accessing the Camera The factory setting of the camera network is as follows. Using the Web Browser IP address: 192.168.0.100 Subnet mask: 255.0.0.0 After the IP address has been assigned to the camera, check that you can actually access the camera using the Wireless LAN setting Web browser installed on your computer. Type: Adhoc Use Internet Explorer as the Web browser. SSID: snc-rz50 Channel: 11 ch 1 Start the Web browser on the computer and type the WEP: Nothing IP addre
Краткое содержание страницы № 12
Preparation When the main viewer of the camera is When using antivirus software, etc. on displayed for the first time the computer When you click Enter, “Security Warning” is displayed. When you use antivirus software, security software, When you click Yes, ActiveX control is installed and the personal firewall or pop-up blocker on your computer, main viewer is displayed. the camera performance may be reduced, for example, the frame rate for displaying the image may be lower. The Web pag
Краткое содержание страницы № 13
Preparation Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera. Setting contents Setting menu Flip the image according to the installation position (desk top or ceiling). E. flip (page 36) Set th
Краткое содержание страницы № 14
Operating the Camera Operating the Camera Administrator and User This network camera identifies the people who log in as the Administrator or User. The Operating the Camera section explains how to The Administrator can use all the functions of this monitor the image from the camera using your Web network camera including camera setting. The User can browser. Use Internet Explorer as the Web browser. use the functions for monitoring the image and audio The functions of the camera should b
Краткое содержание страницы № 15
Operating the Camera When MPEG4 is selected Logging in to Homepage — Welcome Page Logging in as a user 1 Start the web browser on your computer and type the IP address of the camera you want to monitor. The welcome page of Network Camera is When Mode is set to Dual codec displayed. You can monitor JPEG and MPEG4. For JPEG, you can select Java applet viewer. 2 Select the viewer. The usable codecs and viewers are displayed depending on the Mode setting in the Video Codec 3 Click Enter. Tab
Краткое содержание страницы № 16
Operating the Camera With the Java applet viewer 3 Enter the user name and password for Administrator, then click OK. The user name “admin” and the password “admin” are set at the factory for the Administrator. You can change them using the User menu of the Administrator menu (see page 45). The Administrator menu appears in other window. Control the camera from the main viewer. Note If the welcome page does not start correctly, the security level of the Internet Explorer may be set to high
Краткое содержание страницы № 17
Operating the Camera Java applet viewer You can select this viewer when the camera image is in Configuration of Main JPEG. The frame rate is lower than the ActiveX viewer. The Java applet viewer operates only when Java is Viewer installed and Java (Sun) is enabled. If it does not operate This section explains the functions of the parts and correctly, check whether the specified Java version has controls of the main viewer. For a detailed explanation been installed successfully and Java (S
Краткое содержание страницы № 18
Operating the Camera Preset position Main menu Setting Click to display the Administrator menu. (page 29) You can operate this function only when logging in as (Displayed only when one or more preset positions are the administrator. stored in memory.) Select the Preset position name from the drop-down Home list. The camera will move to the preset position that Displays the welcome page. you have stored in memory using the Preset position menu. Camera control section Note If you use Windows
Краткое содержание страницы № 19
Operating the Camera Focus control Note To focus on a nearby object, press . To focus on a distant object, press . If does not appear when the Java applet By pressing , the focus is set to the viewer is used, Audio codec may not be set to G.711 (64 optimum position. kbps) (page 36), Codec in the Alarm buffer menu is set to MPEG4, or Java may not be installed correctly. To check if Java is installed correctly, refer to “Java Note applet viewer” of “About viewers” on page 16. To control th
Краткое содержание страницы № 20
Operating the Camera Note Controlling the Monitor The selected value indicate the maximum number of frame rate that can be transmitted. Image The number of frames actually transmitted may vary depending on network environments and You can monitor the camera image on the monitor camera settings (image size and image quality window of the main viewer. settings). 3 Select the view size. Monitoring the camera image 1 Log in to the homepage to display the main viewer. To log in, see “Logging i
