Краткое содержание страницы № 1
OWNER’S MANUAL
DTV-1200
DTV Capable CRT Projector
Краткое содержание страницы № 2
Краткое содержание страницы № 3
TABLE OF CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power Connection to Projector . . . . . .
Краткое содержание страницы № 4
Blanking Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Convergence Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Focusing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Color Select . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 5
Programmable Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Programmable Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Adjustment Blocks and Source Numbers 90-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Adjustment Blocks (Memory Blocks) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
SAFETY INSTRUCTIONS Safety Instructions Notice On Safety This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2 No.950, which are the safety standards of information technology equipment including electrical business equipment. These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operator against risk of electric shock and en
Краткое содержание страницы № 7
Safety Warning TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE Federal Communication Commission (FCC Statement) This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio freque
Краткое содержание страницы № 8
3. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself. 4. If an extension cord is used with this product, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord ampere rating. 5. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage-
Краткое содержание страницы № 9
On Servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage potentials and risk of electric shock! Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the equipment. c.If the product has been exposed to rain or water.
Краткое содержание страницы № 10
Limited Warranty LIMITED WARRANTY Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance. Please read this consumer protection plan carefully and retain it with your other important documents. This is a LIMITED WARRANTY as defined by the U.S. Consumer Product Warranty and Federal Trade Co
Краткое содержание страницы № 11
EFFECTIVE WARRANTY DATE: This warranty begins on the effective date of delivery to the end user. For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified. TO OBTAIN SERVICE, CONTACT YOUR RUNCO DEALER: Repairs made under the terms
Краткое содержание страницы № 12
CONNECTIONS Power Connection to Projector AC Power (Mains) Cord Connection Use the supplied power cord to connect your Projector to the wall outlet. Plug the female power connector into the male connector at the rear side of the Projector. AC Input OFF/ON OFF/ON 75 Ohm 75 Ohm Green: Operation Red: Standby 12 Volt Trigger RG B HV S-Video Video Status OFF ON Future Expansion INPUT 4/5 INPUT 2 INPUT 1 AC Input OFF ON Power Check The power voltage is autoranging between 100V(-10%) and 240V (+6%
Краткое содержание страницы № 13
Source Connections Input Facilities The following source types can be connected to the inputs : RGB Tri-level Sync RGB Composite, Separate or Sync on green Component Video Component Video with Tri-level Sync AC Input OFF/ON OFF/ON 75 Ohm 75 Ohm Green: Operation Red: Standby 12 Volt Trigger RG B HV S-Video Video Status OFF ON Future Expansion INPUT 4/5 INPUT 2 INPUT 1 3 4 5 2 1 Which source to which input Source No. Projector Input Remote Button No. 1 Comp. Video* 1 (not used) 2 S-Vide
Краткое содержание страницы № 14
u n RGB Source to Input 3 Which signal to Input 3 Connect your RGB source with sync on green, composite or separate sync via an interface to Input 3. Always use an interface when a computer and local monitor have to be connected to the projector as the signal cable coming from the computer is limited to 60 cm due to interferences. Pin configuration D9 connector of the Analog input. 1 Not connected 2 Ground RGBS 3 RED 4 GREEN 5 BLUE 6 Ground RGBS 7 Ground RGBS 8 Hor/comp. sync 9 Vert. sync AC Inp
Краткое содержание страницы № 15
RGB Source with Tri-level Sync to Input 4/5 Which signal to Input 4/5 RGB input terminals with Tri level sync input or with Tri-level sync on green (BNC terminals). The projector detects automatically where the sync signal is located. RGB3S or RG3sB input selection With the remote, press digit button 7 Component Source to Input 4/5 Which signal to Input 4/5 (R-Y)Y(B-Y) input terminals with sync input or with sync on the luminance (Y) input (BNC terminals). The pro- jector detects automaticall
Краткое содержание страницы № 16
GETTING STARTED Remote Control & Local Keypad Battery Installation in the Remote Two batteries are packed together with the Remote. Before using your Remote, install first these batteries. 1 Remove the battery cover on the backside by pushing the handle a little towards the bottom of the Remote. 2 Lift up the top side of the cover at the same time. 3 Insert the batteries as indicated in the Remote. 4 Put the battery cover on its place. How to replace the batteries in the Remote? To replace
Краткое содержание страницы № 17
Overview of Functions This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This remote control is used for source selection, control, adaptation and set-up. It includes automatic storing of: - picture controls (Brightness, Sharpness,....) - settings Other functions on the control units are: - switching between standby and operational modes - switching to "pause" (picture mute) - direct access to all connected sources
Краткое содержание страницы № 18
13 FREEZ: press to freeze the projected image. 14 TEXT: when adjusting one of the image controls, e.g. contrast, during a meeting, the displayed bar scale can be removed by pressing 'TEXT' key first. To re-display the bar scale on the screen, press 'TEXT' key again. 15 ENTER: to start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode. 16 Cursor Keys: to make menu selections when in the adjustment mode.or to increase or decrease the analog level of the image
Краткое содержание страницы № 19
Remote Commands to the Projector Pointing the Remote to the reflective screen Point the front of the Remote to the screen surface. Ceiling IR sensor Screen Remote Point the front of the Remote towards one of the IR sensors in the projector. Front of projector Rear side of projector V See installation instructions before connecting to the supply oir la notice d'installation avant de raccorder au réseau. . " This devicecomplies Operation with is P subject art15 to of the FCC following device may
Краткое содержание страницы № 20
Projector Address Why a projector address? Since more than one projector can be installed in a room, the separate projectors can be separately address- able with a Remote or a computer. Set up an Individual Projector Address The set up of a projector address can be done via the software. See 'Change Projector Address' in Chapter 'Service Mode' How to control the projector or projectors? The projector's address may be set to any value between 0 and 255 which can be set in the Service Mode. When t
