Краткое содержание страницы № 6
DESCRIPTION OF REMOTE CONTROL BUTTONS NUMBER Buttons POWER button Press the Number buttons to select Press to turn the TV on or off. TV channels or to enter values in the POWER 12 3 menu. For single-digit channels, press CH(annel) +/– Buttons Press to scan memorized channels. the Number button for the channel you want. The TV will pause briefly CH 45 6 VOL(ume) +/– Buttons before going to the chosen channel. Press to increase or decrease the sound. CH A/CH Button 78 9 (Alternate Channel) MENU Bu
Краткое содержание страницы № 7
BASIC ANTENNA CONNECTION combination antenna receives normal broad- Antenna Connection: Acast channels (VHF 2–13 and UHF 14–69). Outdoor or Indoor Antenna Your connection is easy because there is only one (Combination VHF/UHF) 75Ω (ohm) antenna plug on the back of your The combination antenna receives normal TV, and that’s where the antenna goes. broadcast channels 2-13 (VHF) and 14-69 (UHF). If your antenna has a round cable (75 ohm) on the end, then you're 1 1 ready to connect it to the TV.
Краткое содержание страницы № 8
BASIC CABLE BOX/DECODER CONNECTION f your cable signal uses a cable box or Idecoder, follow the easy steps below to com- plete the connection. Cable Box Connection (RF Input/Output Only): Cable Box (w/RF Jack Panel Back of Cable Box Cable Signal In/Outputs): IN from the 2 Cable 1 This connection will NOT supply Stereo Company sound to the TV. The sound from the cable OUTPUT CH box will be mono. 3 4 Connect the open end of the CABLE TO TV IN round Cable Company supplied 1 cable to the ca
Краткое содержание страницы № 9
USING THE AV1 IN OR AV2 IN (INPUT) JACKS he TV’s audio/video input jacks are for direct Tpicture and sound connections between the Back of TV TV and a VCR (or similar device) that has audio/video output jacks. Both the AV1 and AV2 24 Input Jack connections are shown on this page, but 1 3 either one can be connected alone. Follow the easy SVHS steps below to connect your accessory device to the Monitor out AV1 in AV2 in AV2 AV1 and AV2 IN Jacks located on the back of the VIDEO TV. Y L/Mono CVI Co
Краткое содержание страницы № 10
USING THE S-VIDEO INPUT JACKS he S(uper)-Video connection on the rear of Back of TV Tthe TV can provide you with better picture AV2 detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), CVI DVD (digital video discs), video games, and S- 2 Monitor out AV1 in AV2 in AV1 VHS VCR (video cassette recorder) tapes than 1 the normal antenna picture connections. VIDEO 24 Y NOTE: The accessory device must have an S- L/Mono VIDEO OUT(put) jack in order for you
Краткое содержание страницы № 11
USING THE CVI (COMPONENT VIDEO INPUT) JACKS omponent Video inputs provide for the high- The CVI connection will be dominate over the AV1 in Video Input. Cest possible color and picture resolution in When a Component Video Device is connected as described, it is best the playback of digital signal source material, not to have a video signal connected to the AV1 in Video Input jack. such as with DVD players. The color difference signals (Pb, Pr) and the luminance signal (Y) con- Back of TV nected
Краткое содержание страницы № 12
USING THE MONITOR OUT(PUT) JACKS he Monitor (Audio/Video) out jacks are great Tfor recording with a VCR or used to connect Jack Panel an external audio system for better sound repro- Located on the back of the TV duction. For Audio System Connection: Monitor out AV1 in AV2 in Connect one end of the R(ight) VIDEO Y and L(eft) AUDIO (Monitor Out) L/Mono 1 jacks on the TV to the R and L audio Pb AUDIO S-VIDEO input jacks on your amplifier or sound R Pr system. Set the audio system’s volume COMPON
Краткое содержание страницы № 13
Front USING THE SIDE AUDIO/VIDEO INPUTS udio and Video Side Inputs are available for Side A/V Input Connection: Aa quick connection of a VCR, to playback video from a camera or attach a gaming device. Use the CH+ or CH - buttons on the remote control to tune these inputs. Connect the video (yellow) cable from the Video output on the Camera 1 (or accessory device) to the Video (yellow) Input located on the SIDE of the TV. For Stereo Devices: Connect the audio cable (red and white) from the 2 Audi
Краткое содержание страницы № 14
HOW TO USE THE LANGUAGE CONTROL or our Spanish speaking TV owners an on- Fscreen LANGUAGE option is present. With the LANGUAGE control you can set the TV’s on- screen menu to be shown in either English or Spanish. Press the MENU button on the Main Picture Brightness remote to show the on-screen menu. 1 Sound Color Features Picture Main Press the CURSOR UP ▲ or Install Sharpness Picture Language DOWN ▼ buttons to scroll Tint 2 Sound Tuner Mode through the on-screen menu until the More
Краткое содержание страницы № 15
HOW TO USE THE TUNER MODE CONTROL he TUNER MODE control allows you to Tchange the TV’s signal input to either ANTENNA, CABLE, or AUTO mode. It’s impor- tant for the TV to know what type of signal that is connected. (From a Cable TV signal or a nor- mal Antenna signal.) In the AUTO mode, when Main the AUTO PROGRAM feature is activated, the TV Picture Brightness will automatically choose the correct mode. Sound Color Features Picture Main Install Sharpness Picture Language Press the MENU
Краткое содержание страницы № 16
HOW TO AUTOMATICALLY PROGRAM CHANNELS our TV can automatically set itself for local Yarea (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+) or (–) buttons are pressed. Main Note: Make sure the antenna or cable signal con- Picture Brightness nection has been completed before AUTO PRO- Sound Color GRAM is activated. Features Picture Main Install Sharpness Picture Language Tint Sound Tuner Mode Press the MENU button on th
Краткое содержание страницы № 17
HOW TO ADD OR DELETE CHANNELS hannel Edit makes it easy for you to ADD or CDELETE channels from the list of channels stored in the TV’s memory. Press the MENU button on the remote to show the on-screen menu. Main 1 Picture Brightness Sound Color Press the CURSOR UP ▲ or Features Picture Main DOWN ▼ buttons to scroll 2 Install Sharpness Picture Language through the on-screen menu until the Tint Sound Tuner Mode word INSTALL is highlighted. More... Features Auto Program Install Ch
Краткое содержание страницы № 18
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS o adjust your TV picture controls, select a Tchannel and follow the steps shown below: Press the MENU button on the Main remote to display the on-screen menu. Picture Brightness 1 Sound Color Press the CURSOR UP ▲ or Features Picture Picture DOWN ▼ buttons until the word Install Sharpness Brightness 50 2 Tint PICTURE is highlighted. Color More... Picture Press the CURSOR RIGHT Sharpness button to display the PICTURE Tint 3 menu featu
Краткое содержание страницы № 19
HOW TO USE THE SOUND ADJUSTMENT CONTROLS esides the normal volume level control, your BTV also has Treble Boost, Bass Boost, Balance, AVL (automatic volume leveler), and Sound (Stereo/Mono) controls. Main Press the MENU button on the Picture Brightness Main Sound Color remote to display the on-screen menu. Picture Treble Boost 1 Features Picture Sound Bass Boost Install Sharpness Press the CURSOR UP ▲ or Features Balance Tint Install AVL CURSOR DOWN ▼ button until More... 2 So
Краткое содержание страницы № 20
HOW TO USE THE FORMAT CONTROL (EXPAND 4:3) any times while watching movies from a MDVD player the image is shown in “letter box” format. This is the format that is shown in movie theaters. When shown on a TV screen, Main the image will have areas of black on top and Picture Brightness bottom of the screen. Sound Color Features Picture Main Press the MENU button on the Install Sharpness Picture SmartLock Tint Sound remote to display the on-screen menu. Format 1 More... Features
Краткое содержание страницы № 1
OWNER’S MANUAL
Color Television
27MS3404R
NEED HELP?CALL US!
MAGNAVOX REPRESENTATIVES ARE READY TO HELP YOU WITH ANY
QUESTIONS ABOUT YOUR NEW PRODUCT.WECAN GUIDE YOU THROUGH
CONNECTIONS,FIRST-TIME SETUP, AND ANY OF THE FEATURES.
WEWANT YOU TO START ENJOYING YOUR NEW PRODUCT RIGHT AWAY.
CALL US BEFORE YOU CONSIDER RETURNING THE PRODUCT.
1-800-705-2000
OR VISIT US ON THE WEB AT WWW.MAGNAVOX.COM
IMPORTANT!
RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
SEE WHY INSIDE.
3121 235 21741
Краткое содержание страницы № 2
I H T I W D E D E E N N O I T Return your Warranty Registration card today to ensure you receive all the you’re entitled to. benefits Once your MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of owning a MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once.And take advan- tage of these important benefits. Warranty Owner Model Verification Confirmation Registration Registering your product within 10 days Your c
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. B. Objects have fallen, or liquid has been spilled into the appli- ance; or 2. Keep these instructions. C. The appliance has been exposed to rain; or 3. Heed all warnings. D. The appliance does not appear to operate normally or 4. Follow all instructions. exhibits a marked change in performance; or 5. Do not use this apparatus near water. E. The appliance has been dropped, or the enclosure damaged. 6. Clean
Краткое содержание страницы № 4
CONTENTS Here are a few of the features built into your new Introduction Television: Welcome/TV Registration . . . . . . . . . . . . . . . . . . . . . . . . . .2 Audio/Video Jack panel located on the back and side of the Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 television for direct connections when using audio/video acces- Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 sory devices. These Jacks can provide impro
Краткое содержание страницы № 5
BASIC TV AND REMOTE CONTROL OPERATION TELEVISION Press the POWER button to turn the TV ON. 1 Note: You can also press any button on the front of the TV to turn the TV ON. INSTALL/MENU – VOLUME + CHANNEL Press the VOLUME + button to increase the sound level, or the 2 VOLUME – button to lower the INSTALL/MENU sound level. – VOLUME + CHANNEL Press the CHANNEL UP ▲ or DOWN ▼ button to select TV chan- 3 1 nels. 2 3 REMOTE CONTROL Standby Light Indicator - Remote Sensor - Sensor for activating
