Краткое содержание страницы № 1
TV. VIDEO. AUDIO. MECABLITZ
Tiros 63 TF 51 – 100 MT
Crystal 70 TF 53 – 100 MT
Operating Instructions
Краткое содержание страницы № 2
Hints for use of the Operating Instructions Do not be put off by the size of the Operating Instructions. Initial- We have made every effort to provide a detailed table of contents ly, it is sufficient to read the instructions in Sections 1.1, 2 and 4. and a comprehensive index to help you to find the information In order to familiarise yourself with the TV set and its many func- you need. The Section "Glossary" contains explanations of tions, we recommend that you read the Operating Instructions
Краткое содержание страницы № 3
+ Remote control handset RB 11 The remote control sends commands to the TV set with the aid of infrared light. For this reason, you should always point the remote control at the TV set for reliable operation. Use of the remote control may interfere with the operation of other devices or systems controlled which use infrared light (such as infrared headphones). If the TV set is exposed to direct sunlight, it may sometimes not function correctly because it cannot recognise the commands transmitted
Краткое содержание страницы № 4
1. Setting up and connecting Setting up When selecting a suitable place for the TV, be sure that no bright light or sunlight falls on the screen. Light may cause reflections and impair the brilliance of the image. The best viewing distance is five times the picture tube diagonal, e.g. about 3.5 m for TV sets with a 70 cm screen. 5x cm Connecting the aerial TV sets require adequate ventilation. The ventilation slots at the rear of the set should therefore never be Standard SAT and terrestrial
Краткое содержание страницы № 5
+ + + 1.1 Turning the TV on and off Turning on with the ON/OFF key Turning on with the remote control Before turning on a cold TV in a warm room, first The programmes can be directly selected with the 0-9 keys allow any condensation mist that may have formed when the television is in standby mode. on the screen to evaporate. Select single-digit programme numbers by pressing the corre- Press the ON/OFF key. sponding numeric key. -/-- Two-digit programme numbers are entered with the presel- Progra
Краткое содержание страницы № 6
+ + + + + 2.1 TV menu and operator help Menu control of the TV, and the versatility of the system, ensure that supposed complicated settings and entries are made easily and ? clearly comprehensible for everyone. Operator Help can be called with the key when in TV mode. Operator Help indicates the functions of the individual keys. ? All settings are entered by way of different submenus. Simply call Operator Help with the key should you encounter difficulties in entering the different equipment c
Краткое содержание страницы № 7
2.2 Programme selection Press this key on the remote The screen displays Explanation control.... 1. Select the programme -/-- Press the key when the TV is in standby mode. position (e.g. Prog The TV then switches to the programme viewed before number 10) the receiver was turned off to standby. Now enter the programme number with the numeric keys. The TV is changed over to the selected programme -/-- position as soon as the last digit has been entered. 1 0 With single-digit programme numbers it
Краткое содержание страницы № 8
+ + + Direct channel entry/ 3. Presetting TV stations station search The TV is supplied with factory preprogrammed TV stations. However, if you can receive TV stations in your area that are not listed in the station table, then these transmitters can be entered and programmed at any time. You can choose one of the following three programming possibilities: a) Direct channel entry b) Station search c) Autostore function Press this key on the remote The screen displays Explanation control.... MENU
Краткое содержание страницы № 9
+ Autostore function, 3. Presetting TV stations sorted to countries The autostore function automatically scans through the entire reception range to locate stations. The located stations are presented in the OK station table and can then be stored by way of the key. If you do not like the order in which the stations appear in the station table, you can sort the stations to match your own requirements as described on the next page. Press this key on the remote The screen displays Explanation cont
Краткое содержание страницы № 10
3.1 Sorting stations In the „Sort“ submenu you can move, exchange, copy, or delete the stationss stored in the programme positions. The „Sort“ submenu is displayed automatically after the autostore function has found all available stations. This menu can also be called at any time from the station table display for subsequent modification of the station programming. Press this key on the remote The screen displays Explanation control.... MENU TV ? return picture Help When the „Sort“ submenu is d
Краткое содержание страницы № 11
+ + 3.2 Fine tuning The individual channels are automatically tuned to channel centre for station tuning. As a rule, this automatic tuning will be sufficient. Apply manual fine tuning if automatic tuning does not produce satisfactory results. Select the programme number at which fine tuning is to be completed. Press this key on the remote The screen displays Explanation control.... MENU ? return TV picture Help The „Fine tuning“ function is only activated when the 1. Select the fine tuning red
Краткое содержание страницы № 12
+ + + + + + + 3.3 Allocating a station logo A logical logo consisting of up to 5 characters can be allocated to each station. The station RTL 2, for example, can be allocated the logo RTL 2. Manual logo allocation is not necessary with most stations. The corresponding station logo appears a few seconds after the picture when a station is selected by direct channel entry. However, an automatic logo only appears for stations which transmit a VPS signal. Press this key on the remote The screen disp
Краткое содержание страницы № 13
+ + + + + + + + + + + + + + + + + + + 4. Changing individual picture settings Press this key on the remote The screen displays Explanation control.... Luminance Press the key to display the last adjusted func- 1. Adjusting the luminance 40 change: OK tion. Continue pressing the key until the picture set- Contrast ting value to be changed is displayed. 40 change OK Adjust the required value with the keys. Chrominance + 40 change OK Sharpness 2. Adjusting the contrast Press the key a number of tim
Краткое содержание страницы № 14
+ + + + + + 4.2 Adjusting the video and audio standard values Press this key on the remote The screen displays Explanation control.... MENU return TV picture ? Help Press any coloured key to step through the submenus. Pressing the blue key selects the „Video standard 1. Call the TV menu TV-menu values“ submenu, pressing the yellow key selects the „Audio standard values“ submenu blue Video standard values 123 456 789 yellow Audio standard values --/- 0 MENU P + OK white Station settings P- TV MEN
Краткое содержание страницы № 15
+ + + Assigning the 5. Equipment configuration function keys ? The remote control handset has two factory programmed function keys A and B. Press the key in normal television mode to reveal the factory programming. The displayed Operator Help text describes the current programming in the last-but-one paragraph. This programming can be changed according to your requirements in conformity with the displayed selection. This choice is described in the „Glossary“ chapter. Example of programming func
Краткое содержание страницы № 16
+ + + Assigning the 5. Equipment configuration function keys Press this key on the remote The screen displays Explanation control.... MENU return TV picture ? Help P + 4. Select the function for TV Select the function in the right-hand field with the P - mode (in this example or key. The text on the left-hand side changes as Functions Function keys „Subtitles“) soon as the cursor (a white bar) is moved. Television TV Muting -12dB 123 A Reveal text If the function „Subtitles“ has been progra
Краткое содержание страницы № 17
+ + + + + + + + Settings for 5. Equipment configuration programme change Press this key on the remote The screen displays Explanation control.... MENU return TV picture ? Help In this menu you can define the sound functions for a 1. Call the settings for programme change. programme change Prog. change settings blue No sound on PC : Yes In the first line of the menu, use the keys to select 123 456 whether the mute function is to be retained („Yes“) or 789 yellow Spat. sound on PC : Off MENU --/-
Краткое содержание страницы № 18
+ + + + + + RGB priority 5. Equipment configuration Volume adaptation Press this key on the remote The screen displays Explanation control.... MENU TV ? return picture Help 1. Call the „Equipment configuration“ menu Equipm. configuration blue Prog. change settings MENU 123 456 789 yellow RGB priority: Yes --/- 0 P + 2x red OK white Sound settings: Yes P- TV MENU ? A AV B REC store ? OK 698-05B-GB MENU return TV picture ? Help The RGB priority must be set to Yes if a Pay-TV deco- 2.
Краткое содержание страницы № 19
+ + + + + + 6. Volume adjustment and forced mono It is possible for TV stations to be received at different volume levels although the volume level settings on the individual programme positions are identical. To overcome this problem, you can set a volume correction factor for each programme position. Example: Programme 1 is soft: volume value 40. Programme 3 is loud: volume value 40. Programme 1 is to be adjusted to the same volume as Programme 3. Switch over to programme position 1. Press t
Краткое содержание страницы № 20
+ + + + 6.1 Correcting picture deviations It is possible for stations to be received with differing levels of chrominance, picture sharpness and contrast, even though the settings on the individual programme positions are identical. For this reason, your TV set enables you to correct the value for each programme position and/or to select a picture correction function (CTI, noise reduction). Press this key on the remote The screen displays Explanation control.... MENU TV ? return picture Help Th
