Краткое содержание страницы № 1
INSTRUCTION MANUAL
Color Television
DTQ 20U4SC
DTQ 27U4SC
Краткое содержание страницы № 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equil
Краткое содержание страницы № 3
SAFETY IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ventilation and to 2 Save these instructions for later use. ensure reliable operation of the television 3 Unplug this television equipment from the wall equipment; and to protect it from overhea
Краткое содержание страницы № 4
(f) When the television equipment exhibits a 13 An outside antenna system should not be locat- ed in the vicinity of overhead power lines or distinct change in performance - this indi- cates a need for service. other electric light or power circuits, or where it can fall into such power lines or circuits. When 18 When replacement parts are required, be sure installing an outside antenna system, extreme the service technician has used replacement care should be taken to keep from touching such pa
Краткое содержание страницы № 5
Daewoo Electronics America Inc. 120 Chubb Avenue, Lyndhurst, NJ 07071 Dear Customer : Daewoo Electronics America Inc. would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to come. We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it delivers just as quickly as possible, but we ask you to take a few minutes to read the instructions in the booklet to f
Краткое содержание страницы № 6
CONTENTS Table of Contents Chapter 1: Overview of Your Equipment 2 Your TV's Front Panel 2 Your TV's Back Panel 3 Your Remote Control 4 Installing your remote control batteries 5 Notes 5 Chapter 2: Connecting an Antenna or Cable to Your TV 6 Connecting an Antenna 6 Connecting a Cable System 7 Connecting Other Pieces of Equipment 8 Safety Note 8 Chapter 3: Operating Your TV 9 Turning your TV On 9 Programming Your TV's Channel Memory 9 Changing Channels 10 Changing the Volume 10 Changing The TV's
Краткое содержание страницы № 7
CHAPTER 1 Overview of Your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and ter- minals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 VIDEO IN jack Use this jack to receive a video signal from another A/V component. 3 AUDIO IN jack Use this jack to receive an audio signal from another A/V component. 4 HEADPHONE jack Use this jack to enjoy the TV sound alone. 5 POWER(red) indicator T
Краткое содержание страницы № 8
Your TV's Back Panel AV4 IN AV1 IN AV2 IN MONITOR OUT ANT COMPONENT VIDEO VIDEO Y L/MONO L/MONO PB AUDIO S-VIDEO AUDIO R R PR 167 25 3 4 1 Antenna terminal(ANT) Use this terminal to attach an antenna or cable system to your TV. 2 VIDEO IN These terminals allow the TV to receive video signals from another A/V components. * S-VIDEO jack is used to receive the separated video signal, such as Y/C signals from the S-VHS VCR. 3 AUDIO IN This terminal allows the TV to receive audio signals from another
Краткое содержание страницы № 9
Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. MUTE Use to turn the TV’s sound on and off. 3. WCHV Use these buttons to change channels on your TV, or 2 1 select items in the menu system. 3 4. CVOLB 4 4 Use these buttons to change your TV's volume, to 5 activate selections in the menu system, or to change 3 audio and video settings. 5. MENU 9 Use this button to turn the TV’s menu system on and off. 6. DISPLAY Use this button to display the channel 10 11 number and t
Краткое содержание страницы № 10
Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries together or old batteries with fresh ones. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire. Point your remote
Краткое содержание страницы № 11
CHAPTER 2 Connecting an Antenna or Cable to Your TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating
Краткое содержание страницы № 12
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a combin- er (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna
Краткое содержание страницы № 13
If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the con- verter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. If your cable system only requires you to use a converter box for some channels (i. e. pay-TV chan- nels), follow these steps: Find the primary incomin
Краткое содержание страницы № 14
CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter- ies in the remote, you are ready to use the TV. The first thing you should do is to program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV's Channe
Краткое содержание страницы № 15
Changing Channels You can change channels in three ways: 1 1 The WCHV buttons will take you through all memorized channels, one by one. The WCHV buttons will not access channels that have 2 not been programmed into the TV's memory. For more information about programming channels into memory, see the section 3 “Programming your TV's Channel Memory” on the previous page. 2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its nu
Краткое содержание страницы № 16
Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the WCHV buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the WCHV buttons. If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channel memorized, then the Add/Delete Channels f
Краткое содержание страницы № 17
Changing the TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV(such as a VCR & DVD) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ‘ TV ’ input to the ‘AV1-AV3, CVI’ Input, as follows. 1 With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear. 2 Use the WCHV buttons to select “ Input ”. 3 Pre
Краткое содержание страницы № 18
Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing pic- ture. To do so, follow these directions: 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 The “Settings” item will be selected. Use the CVOLB buttons to turn Settings to Preset or Custom. 3 Use the WCHV buttons to select the video setting you wish to adjust. Descriptions of the video settings are on the next page. 4 Use the CVOLB buttons to adjust
Краткое содержание страницы № 19
Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, fol- low these steps : 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 Press the CVOLB buttons to set the “Settings” to ‘Preset’. The TV will remember the ‘Custom’ settings you had previously chosen. When you set “Settings” to ‘Custom’ again, your previous custom settings will be restored. 1 2 Video Video Settings : Cu
Краткое содержание страницы № 20
CHAPTER 4 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 The “Set Clock” item will be selected. Press the CVOLB buttons to set the clock. If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 3 Whe
