Краткое содержание страницы № 1
DTQ 14V1FCN
DTQ 20V1FCN
DTQ 14V4SCN
DTQ 20V4SCN
P/N:48586001E217-R0
Краткое содержание страницы № 2
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of suffi- cient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOS
Краткое содержание страницы № 3
CONTENTS Your TV's Front Panel 4 Your TV's Back Panel 5 Your Remote Controls 6 Installing your remote control batteries 7 Notes 7 Connecting an Antenna 8 Connecting a Cable System 9 Connecting Other Pieces of Equipment 10 Safety Note 10 Turning your TV On 11 Programming Your TV's Channel Memory 11 Changing Channels 12 Changing the Volume 12 Changing The TV's Channel Memory 13 Adding/Deleting a channel to memory 13 Displaying the Current Channel 13 Changing the TV s Input 14 Adjusting Video Setti
Краткое содержание страницы № 4
SAFETY PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. Read all of these instructions. This television equipment should be operated only from the type of power source indicated on the marking label. If Save these instructions for later use. you are not sure of the type of power supplied to your Unplug this television equipment from the wall outlet home, consult your television
Краткое содержание страницы № 5
An outside antenna system should not be located in the If an outside antenna or cable system is connected to the vicinity of overhead power lines or other electric light or television receiver, be sure the antenna or cable system is power circuits, or where it can fall into such power lines or grounded so as to provided some protection against volt- circuits. When installing an outside antenna system, age surges and built-up static charges. extreme care should be taken to keep from touching such
Краткое содержание страницы № 6
CHAPTER 1 Your TV comes with a remote control. The section below summarizes the buttons, controls, and terminals that you will use with your TV. POWER CH VOL MENU STAND-BY VIDEO AUDIO EARPHONE 12 3 45 6 7 8 9 Use this button to turn your TV on or off. Use these buttons to change channels on your TV, or to select items in the menu system. Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings. Use this bu
Краткое содержание страницы № 7
ANT VIDEO AUDIO 1 2 3 Use this terminal to attach an antenna or cable system to your TV. This terminal allows the TV to receive a video signal from another component, such as a VCR. This terminal allows the TV to receive an audio sighal from another component, such as a VCR. 5 Overview of Your Equipment
Краткое содержание страницы № 8
2 2 1 1 3 3 4 4 4 4 5 5 3 3 9 9 10 11 10 11 6 6 8 8 7 7 Use this button to select TV or VIDEO mode. Use this button to turn your TV on or off. Use this button to display video adjustment Use to turn the TV s sound on and off. items. Use these buttons to change channels on your TV, or select items in the Use these buttons to change channels. menu system. Use these buttons to change your TV's volume, to activate selections in Use this button to program the TV to turn off after a certain time. th
Краткое содержание страницы № 9
Open the battery compartment on the back of the remote control. Install two AA-size batteries (not included) as shown. Make sure the + and - terminals are oriented cor- rectly. Replace the cover. Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire. Point your remote at the receiver on the center of the front of the TV. Make sure
Краткое содержание страницы № 10
CHAPTER 2 Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them. All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see Your TV's Back
Краткое содержание страницы № 11
You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna terminal on the back of your TV. you must obtain a combiner (avail- able at your local electronics store
Краткое содержание страницы № 12
OUT IN IN OUT OUT IN connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter (available at your local electronics store). Connect one coaxial cable between one OUT terminal on the
Краткое содержание страницы № 13
CHAPTER 3 Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels. To turn your TV on, press the POWER button on the remote control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Your TV's memory determines the channels that are available using the C
Краткое содержание страницы № 14
You can change channels in three ways: The CH buttons will take you through all memorized channels, one by 1 one. The CH buttons will not access channels that have not been pro- grammed into the TV's memory. For more information about programming 2 channels into memory, see the section Programming your TV's Channel Memory on the previous page. 3 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its number; the TV will tune to
Краткое содержание страницы № 15
Your TV's memory determines the channels that are available using the CH buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number but- tons, but you cannot tune to it with the CH buttons. If there are just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channel memorized, then the Add/Delete Channels function will search the memorized c
Краткое содержание страницы № 16
Normally, your TV displays the signal coming through the antenna terminal. However, If you ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the TV input to the Line Input, as follows. With the TV on, press the MENU button twice, then set-up menu will appear. Use the CH buttons to select Input . Press the VOL buttons to change from TV to Line . Wait 10 seco
Краткое содержание страницы № 17
You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: With the TV on, press the MENU button. then Video menu will appear. The Settings item will be selected. Use the VOL buttons to turn Settings to Preset or Custom. Use the CH buttons to select the video setting you wish to adjust. Descriptions of the video settings are on the next page. Use the VOL buttons to adjust the video setting to the level you prefer. U
Краткое содержание страницы № 18
If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : With the TV on, press the MENU button. then Video menu will appear. Press the VOL buttons to set the Settings to Preset . The TV will remember the Custom settings you had previously chosen. When you set Settings to Custom again, your previous custom settings will be restored. 1 2 Video Video Settings : Custom Settings : Preset Contrast
Краткое содержание страницы № 19
CHAPTER 4 Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. With the TV turned on, press the MENU button until Time menu will be displayed. The Set Clock item will be selected. Press the VOL buttons to set the clock. If you hold down either VOL or VOL button, the corresponding numbers will change more quickly. When the clock is set correctly, use the CH buttons to se
Краткое содержание страницы № 20
If you enter a time in the Off time setting, your TV will automatically turn off at that time. Follow these instruc- tions to set the Off time . With the TV turned on, press the MENU button until Time menu will be displayed. Use the CH buttons to select Off time item. If you hold down either VOL or VOL button, the corresponding numbers will change more quickly. When the setting is correct, use the CH buttons to select another Time function, or press the MENU button to return to normal TV viewing
