Краткое содержание страницы № 1
2-664-110-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
RU
Инструкция по эксплуатации
• Перед работой с устройством внимательно прочтайте инструкцию
и сохраните её для дальнейшего использования.
KV-DB29
M98
M91
© 2005 Sony Corporation
01GB01COV-SOEMRus.p65 1 9/21/05, 11:44 AM
Sony KV-DB29M98 Group S10 (GB, RU)_2-664-110-11 (1)
Black
Краткое содержание страницы № 2
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediat
Краткое содержание страницы № 3
Table of Contents Installation Menu Adjustment Securing the TV .................................... 4 Introducing the WEGA GATE navigator ............................................. 16 Getting Started ..................................... 5 “Settings” Adjustment ...................... 17 Setting up your TV (“Initial Setup”) .................................... 6 Changing the “Picture” setting ........ 19 Changing the “Sound” setting ......... 21 Changing the “Wide Screen” Overview of Controls
Краткое содержание страницы № 4
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. or (1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Secu
Краткое содержание страницы № 5
Installation b b x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components (see page 28). Step 3 Plug in the power cord, then press ! on the TV to turn it on. Note • The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not
Краткое содержание страницы № 6
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa“ (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel. Press V or v to select the desired menu 1 language, then press . The selected menu language appears. Select Confirm End Press V or v to select “Yes”, then press to
Краткое содержание страницы № 7
Installation d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press . 05 1) To label, press V or v to select the alphanumeric characters for the label. Select Confirm Exit Then press . 2) To skip the program number, press V or v to select “On”. Then press . You can skip this program number when 05 using PROG +/-. Select Confirm Exit 3) To block unwanted program number, press V or v
Краткое содержание страницы № 8
Overview of Controls x TV front and rear panels TV rear panel 1 2 Y PB/ CB 3 1 PR/ CR L R AUTO PROG:Press [MENU] for 5sec 4 L(MONO) R SOUND MODE (AUT MENU O PROG) PROG qa qs qdqf qg TV front panel 9 87 6 5 4 2 0 3 1 WEGA GATE L(MONO) R SOUND MODE PROG 2 Button/Terminal Function Page 1 ! Turn off or turn on the TV. 5 2 1 Standby indicator. 5 2 Wake Up indicator. 9 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. 28 WEGA GATE men
Краткое содержание страницы № 9
Overview of Controls PROG x Using the remote control and basic functions Button Description Page VIDEO 1 qf 1 ?/1 Turn off temporarily or – turn on the TV. qg WEGA 2 THEATRE 2 a Display the TV program. – qh 3 3 t Select TV or video input. 28 A/B Stereo/bilingual operations 4 PROG INDEX 4 A/B Select stereo/bilingual mode. 13 5 5 PROG INDEX Not function for your TV. – 6 WEGA GATE menu operations 6 V, v, B, b Select and adjust items. 16 7 WEGA GATE RETURN 7 Confirm selected items. 16 qj 8 8
Краткое содержание страницы № 10
continued Button Description Page qk Select sound mode options with a 5-Band 11 Graphic Equalizer display. ql Select picture mode options. 11 w; Select surround mode options. 21 wa 0 – 9 Input numbers. For program numbers 10 and above, enter the second digit within two seconds. – ws 2 +/– Adjust volume. – TWIN picture operations , , V,v,B,b Not function for your TV. – Teletext operations (green label) All buttons are used for Teletext operations. 14 , , , , , ,
Краткое содержание страницы № 11
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. VIDEO Selecting the picture mode WEGA Press to select the desired picture mode. THEATRE Select To view A/B “Vivid” contrast and sharp pictures. PROG INDEX “Standard” normal pictures. “Custom” the last adjusted picture setting from the “Picture Adjustment” WEGA RETURN GATE option in the menu (see page 20). 1 2 3 4 5 6 7 8 9 0 Select
Краткое содержание страницы № 12
PROG x Enjoying the WEGA Theatre Mode The WEGA Theatre Mode enables you to enjoy the best picture, sound and surround effect of a cinema from a DVD source. VIDEO Setting up WEGA Theatre Mode 1. Place your TV and connected Sony equipment WEGA THEATRE adjacent to each other so that you can control both WEGA the TV and the connected equipment by using the THEATRE A/B TV’s remote control at the same time (see page 15). PROG INDEX 2. Select the proper video input from “WEGA Theatre Setup” menu and t
Краткое содержание страницы № 13
PROG x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. VIDEO When receiving a NICAM program WEGA Broadcasting On-screen display (Selected sound) THEATRE NICAM Mono NICAM t stereo (Regular sound) A/B (Stereo sound) A/B PROG INDEX NICAM NICAM Main NICAM Sub Mono tt (Main sound) (Sub sound) (Regular sound) bilingual WEGA GATE RETURN NICAM Main Mono NICAM t (Main sound) (Regular sound) monaural 1 2
Краткое содержание страницы № 14
PROG x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. VIDEO To Do this WEGA THEATRE display a Teletext Press . Each time you press , the page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV. A/B If there is no Teletext broadcast, “100” is PROG INDEX displayed at the top left corner of the
Краткое содержание страницы № 15
x Operating optional components You can use the supplied remote to operate Sony audio/video equipment. Setting up the remote to work with other connected equipment While keeping VIDEO ?/1 For example, to operate a pressed, press the corresponding Sony 8 mm VCR: number button for the desired VIDEO equipment (see the chart below). 8 + To control Hold down VIDEO ?/1 and press Audio System 1, 1x, 2 or 3 0, 1, 2, or 3 DVD 1, 2 or 3 4, 5 or 6 VTR1 (Beta), VTR2 (8 mm) or VTR3 (VHS) 7, 8 or 9 Operating
Краткое содержание страницы № 16
Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. TV WEGA GATE TV 01 02 watch the preset External Inputs “TV” 03 Settings TV channels 04 (see page 6) 05 Select Confirm End Select Confirm External Inputs select the inputs “External 1 Video 1 2 Video 2 for the connected Inputs” 3 Video 3 equipment 1 HD/DVD 1 2 HD/DVD 2 (see page 28) Select Confirm End Picture DRC-MF: DRC1250 Pict
Краткое содержание страницы № 17
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press . The following is an overview of the items that can be adjusted. Picture “Picture” (see page 19) DRC-MF: DRC1250 “DRC-MF”: “DRC1250” “DRC100” “Progressive” Picture Mode: Vivid Picture Adjustment “Picture Mode”: “Vivid” “Standard” “Custom” 3D Intelligent Picture: On “Picture Adjustment”: “Pictur
Краткое содержание страницы № 18
continued Setup ”Setup” (see page 26) Language: English Picture Position “Language”: “English” “ ” (Russian) WEGA Theatre Setup Game Mode: Off “Picture Position”: “Picture Rotation”, “Picture V-Position” Video Label “WEGA Theatre Setup”: “Direct Input” Color System: Auto “Game Mode”: “On” “Off” Select Confirm End “Video Label” “Color System”: “Auto” “PAL” “SECAM” “NTSC3.58” “NTSC4.43” “Eco Mode”: “On” “Off” “Factory Settings”: “Yes” “No” Note • When a feature is dimmed in the menu, it is
Краткое содержание страницы № 19
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. 1 Make sure the “Picture” icon ( ) is Picture 2 DRC-MF: DRC1250 . selected, then press Picture Mode: Vivid Picture Adjustment 3D Intelligent Picture: On Select Confirm End Press V or v to select the desired item (e.g., “DRC-MF”), then press . 3 Select To “DRC-MF” choose either “DRC1250” (for high density pictures), “DRC100” (reduce flicker on the screen) or “Prog
Краткое содержание страницы № 20
continued Adjusting the “Picture Adjustment” items under “Custom” mode Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, 1 “Hue” (color tones),“Sharpness” or “Color Temperature” (choose either “Cool”, “Neutral” or “Warm”), then press . Selecting “Reset” will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press . 2 Repeat the above steps to adjust other items. 3 The adjusted settings will be received when you select
