Краткое содержание страницы № 1
FLASH
User’s manual
2.4 GHz Cordless
Telephone/Answering
System E2913B/
E1113B
with caller ID/call waiting
TONE
MUTE REDIAL INT
DELETE PAUSE
CLEAR
Краткое содержание страницы № 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 54-56 of this manual. Please thoroughly read the user’s manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com Model #: E293B/E 3B Product name: 2.4GHz cordless telephone/answering system Serial #: (found on the bottom of
Краткое содержание страницы № 3
You must install and charge See page 7 the battery before using the STOP! for easy instructions. telephone. For customer service or product information, visit our website at www.telephones.att.com. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use only the supplied rechargeable battery or replacement battery (model 279 0, part number 89-0099- 00-00) or equivalent. To order a replacement battery, visit our
Краткое содержание страницы № 4
FLASH User's manual 2.4 GHz Cordless Telephone/Answering System E2913B/E1113B TONE MUTE REDIAL INT DELETE PAUSE with caller ID/call waiting Table of contents Getting started Answering system operation Quick reference guide ......................2 Answering system operation......34 Parts checklist ......................................4 Day and time announcements ..35 Telephone base installation ...........5 Outgoing announcements ...........36 Battery installation & charging............ 7 Chan
Краткое содержание страницы № 5
Getting started Quick reference guide Cordless handset MENU/SELE /SELE SELECT CT CT CID/-VOLUME Press to display the menu. Once in the menu, press to select an item Press to scroll down while in or save an entry or setting. menus. Press to display caller ID information (page 33). While DIR /VOLUME+ entering names or numbers, press to move the cursor to the Press to scroll up while in menus. left (page 26). Press to decrease Press to display directory entries the listening volume while
Краткое содержание страницы № 6
Getting started Quick reference guide Telephone base CHARGE/IN USE Flashes when another telephone on the same line or one of the handsets is in use. Flashes when the answering system is answering an incoming call. HANDSET LOCATOR Flashes while an incoming call is ringing. Press to make handsets On steady when the handset is beep (page 3). properly positioned to charge in the telephone base. SETUP ANNC Press to review or change Press to review or record answering system options annou
Краткое содержание страницы № 7
FLASH FLA SH Getting started Parts checklist Save your sales receipt and original packaging in case it is necessary to ship your telephone for warranty service. Check to make sure the telephone package includes the following: User’s manual Quick start guide 2.4 GHz Cordless 2.4 GHz Cordless Telephone/Answering Telephone/Answering System E2913B/ System E2913B/ E1113B E1113B with caller ID/call waiting with caller ID/call waiting TONE TONE MUTE REDIAL INT MUTE REDIAL INT DELETE PAUSE DELETE PA
Краткое содержание страницы № 8
Getting started Telephone base installation Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telephone base too close to: • Communication devices such as: personal computers, computer routers, television sets, VCRs, wireless routers (wireles
Краткое содержание страницы № 9
Getting started Telephone base installation 1. Plug one end of the telephone line cord 2. Plug the small end of the power adapt- into the telephone jack at the bottom of er into the power jack at the bottom of the telephone base. the telephone base. 3. Route cords through slots. 5. Plug the other end of the telephone line cord into a telephone jack. 4. Plug the large end of the larger power DSL filter Telephone line cord adapter into an electri- (Optional for DSL users, see number four
Краткое содержание страницы № 10
Getting started Battery installation & charging After installing the battery, you may be able to make and receive short calls. For best performance, place the handsets in the telephone base or the charg- er and charge for 6 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When the battery is fully depleted, a recharge takes about 2 hours. The average talk time on a fully charged battery is about eight hours, and
Краткое содержание страницы № 11
Getting started Installation options Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting plate with studs may be available for purchase from many hardware or consumer electronics retailers and may require professional installation. . To remove the bracket, hold the 2
Краткое содержание страницы № 12
Getting started Installation options 3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the telephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs. Press and
Краткое содержание страницы № 13
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into the notches on both sides of To release belt clip handset. from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call (800) 222-3 ; in
Краткое содержание страницы № 14
Telephone operation Elapsed time Basic operation Making and answering calls PHONE 00:00:30 To answer an incoming call, press PHONE/FLASH, SPEAKER or any dial pad key (0-9, * or #) on the handset. To make a call, press PHONE/FLASH or SPEAKER then dial a number. Press OFF/CLEAR or place the handset in the telephone base or charger to hang up. To predial (preview numbers before dialing), enter numbers first. Press MUTE/DELETE or OFF/CLEAR TONE anytime to make corrections, then press SPEAKER
Краткое содержание страницы № 15
Telephone operation Basic operation Last number redial Press REDIAL/PAUSE to display the most recently REDIAL called numbers (up to 32 digits). Press CID/-VOLUME, DIR /VOLUME+ or REDIAL/PAUSE repeatedly to view 555-234 up to five recently called numbers. The handset beeps twice at the beginning or end of the list. Press OFF/CLEAR to exit. Press SPEAKER or PHONE/FLASH to redial any displayed number. Or press PHONE/FLASH or SPEAKER then REDIAL/PAUSE to dial the most recently called number
Краткое содержание страницы № 16
Telephone operation Basic operation Handset locator If the handsets are misplaced, press HANDSET LOCATOR on the telephone base. The handsets will play a paging tone for 60 seconds to help you locate them. To stop the paging tone, press PHONE/FLASH, SPEAKER, or any dial pad key (0-9, *, or #) on the handsets, or press HANDSET LOCATOR on the telephone base. NOTES: . If the handset ringer is set to off (0), the hanset locator feature is not avaible on that handset (page 24). 2. D Du ur ri
Краткое содержание страницы № 17
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. NOTE: The hands-free speakerphone and headset listening volume are adjusted separately. Call waiting Volume If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE/FLASH to put
Краткое содержание страницы № 18
Telephone operation Options while on calls Mute Press MUTE/DELETE to silence the microphone. When mute is on, will show on the handset screen. You will be able to hear the caller, but your caller will not be able to hear you until you press MUTE/DELETE again and resume speaking. When mute is turned off, MICROPHONE ON will show temporarily on the handset screen. Mute is automatically cancelled when you end a call. Tone TONE MUTE REDIAL Mute DELETE PAUS E Temporary tone dialing If you have
Краткое содержание страницы № 19
Telephone operation Intercom Use the intercom feature for conversations between handsets. . Press INT. The screen of the originating handset TONE TONE will show INTERCOM TO:. MUTE REDIAL MUTE REDIAL DELETE PAUSE DELETE PAUS E 2. Enter the handset number of the destination handset ( , 2 or 3). The display will show CALLING HANDSET X. The destination handset will ring, and its screen HANDSET will show HANDSET X IS CALLING. 2:45PM NOTES: • Before the intercom call is answered, you c
Краткое содержание страницы № 20
Telephone operation Intercom call transfer Use the intercom feature to transfer an external call from one handset to another. . During a conversation with an external call, press TONE TONE MUTE REDIAL MUTE REDIAL INT. The external call is automatically placed on DELETE PAUS E DELETE PAUS E hold. The originating handset’s screen will show INTERCOM TO:. PHONE 00:05:30 2. Enter the handset number of the destination handset ( , 2 or 3). The display will show CALLING HANDSET X. The dest
