Краткое содержание страницы № 1
Cordless Telephone System
With Caller ID
t 2415
Caller ID/call waiting*
90 Name and number
caller ID memory
Voice mail waiting indicator**
Краткое содержание страницы № 2
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water (for example, near a bath tub
Краткое содержание страницы № 3
Important Safety Instructions B. If liquid has been spilled onto the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. E. If the product has been dropped and th
Краткое содержание страницы № 4
Before You Begin Enhanced 2.4GHz Technology - Dual Band transmission combines the best of 2.4GHz and 900MHz technologies, providing enhanced performance over standard cordless telephones. Parts Check List 1. Base Unit 5. Battery 2. Handset 6. Belt Clip 3. Base AC Power Adaptor 7. User’s Manual 4. Telephone Line Cord 8. Base Wall Mounting Bracket To purchase replacement batteries, call VTech Communications, Inc. at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267
Краткое содержание страницы № 5
Installation Before You Install 1. Choose a location for the Base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110V AC) not controlled by a wall switch. 2. Install the Handset battery. Use only VTech batteries. a) Remove battery compartment cover by pressing on the indentation and sliding downward. b) Align the two holes in the plug with the socket pins, then snap the plug into place. c) Place the battery in the co
Краткое содержание страницы № 6
Installation Table/Desk Installation
4. Charge the Handset Battery Place the Handset in its Base. Charge the battery at least for 12 hours before using your telephone for the first time. 5. Check for Dial Tone After the battery is charged, pick up the Handset and press PHONE. You should hear a dial tone. 6. Set the Dial Mode If you have touch tone service, the phone is ready to use as soo
Краткое содержание страницы № 7
Installation Wall Installation The wall mount bracket is designed for use on standard wall mount plates only. 1. Run the power and telephone line cords through the slots in the bracket, then connect them to the jacks located on the underside of the Base. 2. Plug the AC adapter into an electrical outlet. If the battery pack has not been previously charged, place the Handset in its Base, and allow it to charge for 12 hours. 3. Connect the telephone line cord to the wall jack. 4. Line up the tabs o
Краткое содержание страницы № 8
Telephone Operation Handset Operation Answer a Call Handset Volume Press any key Adjust the volume while except OFF. on a call. A double beep will sound when you Hold reach the maximum or Press to put a call minimum setting. on hold. Press again to release hold. -OR- Select Lift the Handset of Use SEL in conjunction an extension. with PROG during Handset programming. Make a Call End a Call Press PHONE, then dial Press OFF. the number. -OR- -OR- Place Handset Dial the number (use in its Base. to
Краткое содержание страницы № 9
Telephone Operation Base Operation Message Waiting Indicator If you subscribe to telephone company voicemail with a visual message waiting signal, this light flashes, and MESSAGES WAITING displays on the Handset screen, when you have voicemail waiting. Page/Handset Locator Press to page the Handset. Press again, press OFF on Handset, or place Handset in it’s Base to cancel the page. In Use/Charging Indicator • Flashes in unison with the ring of an incoming call. • Flashes slowly when the Handse
Краткое содержание страницы № 10
Telephone Operation Temporary Tone Dialing If you have pulse (rotary) service only, you can change from pulse to touch tone dialing during a call by pressing *TONE. This is useful if you need to send touch tone signals for access to telephone banking or long distance services. 1. Dial the number. 2. Press *TONE. Buttons pressed after this send touch tone signals. 3. After you hang up, the phone automatically returns to pulse (rotary) service. Message Waiting Your t 2415 is designed to work with
Краткое содержание страницы № 11
Display Screen Messages Screen Displays: When: There is a call coming in. ** RINGING ** The Handset is waiting for a dial tone. CONNECTING... The Handset is in use. PHONE ON The Handset is changing to another of the 30 SCANNING... channels available. The Base is paging the Handset. ** PAGING ** There is a call on hold. HOLD The Battery needs to be recharged. BATTERY LOW Displays and a sad tone sounds when the Base NO CONNECT power is off and PHONE is pressed. Displays and a sad tone sound
Краткое содержание страницы № 12
Speed Dial You can store up to 9 telephone numbers with names (up to 15 characters and 24 digits in each location) you dial frequently into the Speed Dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See Telephone Directory (on page 13) for instructions. NOTES: • The entries you store in Speed Dial memory will be marked with 01 through 09 in the telephone directory. • Press OFF at any time to exit memory dial mode. St
Краткое содержание страницы № 13
Speed Dial 6. When you finish entering the name, press SEL or PROG. The screen displays ENTER NUMBER. 7. Enter the telephone number. Use to backspace and make corrections. Press REDIAL/PAUSE to store a pause in the dialing sequence. -OR- Press REDIAL/PAUSE to display the last number dialed from this phone. 8. Press SEL or PROG to store your entry. The screen displays DISTINCT RING? and the current setting. 9. Press or to change the setting. Choose Y (for yes) if you wish the phone to alert yo
Краткое содержание страницы № 14
Speed Dial Dial a Speed Dial Number 1. Press and hold the memory location key (1 through 9) of the entry you wish to dial. 2. Press PHONE to dial the displayed speed dial number. Reassign Locations in Speed Dial 1. Press and hold the memory location key (1 through 9) of the entry you wish to reassign. 2. When the screen displays the entry you want to reassign, press SEL. Then press until SPEED flashes. SPEED EDIT ERASE 800-595-9511 01 3. Press SEL. The screen displays ENTER 1-9. 4. Press the
Краткое содержание страницы № 15
Telephone Directory Your t 2415 can store 50 (including the nine Speed Dial entries) telephone numbers with names (up to 15 characters for the name and 24 digits for the number in each location). NOTE: Press OFF at any time to exit directory. Store a Number/Name in the Directory 1. Press PROG. The screen displays DIRECTORY. 2. Press SEL. The screen displays ENTER NAME. 3. Using the chart below, enter up to 15 characters for the name you’re storing with the number. Use to backspace and make corr
Краткое содержание страницы № 16
Telephone Directory 8. Press SEL or PROG to confirm your selection. If you chose Y, a D will be displayed with the directory entry. NOTE: When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored entry. Edit a Number/Name Stored in the Directory 1. Press (DIR). The screen displays DIRECTORY. 2. Press or to scroll alphabetically through the entries stored in the directory. -OR- Press the dial pad key
Краткое содержание страницы № 17
Telephone Directory Dial a Number from the Directory 1. Press (DIR). The screen displays DIRECTORY. 2. Press or to scroll alphabetically through entries stored in directory. -OR- Press the dial pad key for the first letter of the entry you want to dial. 3. When the number you want to dial is displayed, press PHONE. Move a Number/Name to the Speed Dial Memory 1. Press (DIR). The screen displays DIRECTORY. 2. Press or to scroll alphabetically through directory. - OR - Press the dial pad key
Краткое содержание страницы № 18
Caller ID Operation Caller’s name Party has called VTECH* 2 or more times Long distance call L 800-595-9511 Caller’s AM NEW telephone 5/01 5:40 PM OLD28 number Date of call Position of call Time of call in call history About Call History (Caller ID) Your t 2415 can store up to 90 calls in its Caller ID memory. The most recent call will have the highest number. When the memory is full, the oldest call will be deleted to make room for new incoming call information. If you answer a call before
Краткое содержание страницы № 19
Caller ID Operation Dial a Displayed Number 1. Locate the record in call history that you want to dial. 2. If you wish to change how the number is dialed, press #. The screen displays alternate dialing sequences available for this call (area code + number; 1 + area code + number; number only; 1+ number). 3. Press SEL. DIAL flashes on the screen. DIAL PROGRAM 800-595-9511 5/01 5:40PM 4. Press SEL again. The number is automatically dialed. - OR - When the number is correctly displayed for d
Краткое содержание страницы № 20
Caller ID Operation Display Screen Messages Screen Displays: When: PRIVATE PRIVATE PRIVATE The other party is blocking name and/or number PRIVATE PRIVATE information. UNKNOWN UNKNOWN UNKNOWN UNKNOWN UNKNOWN Your phone company is unable to receive information about this caller’s name and/or number. ***** (after the name) This caller has called you more than once. 19 Basic Operation
