Краткое содержание страницы № 4
MB260 Multifunction Terminal's Supervision 37 Checking the connection between the PC and the multifunction machine 37 Companion Director 37 Graphical presentation 37 Utilities and applications activation 37 Companion Monitor 37 Graphical presentation 37 Device management 37 Selecting the current device 37 Status of the connection 38 Device parameters 38 Removing a device 38 Display the consumable status 38 Companion Suite Pro functionalities 39 Document analysis 39 Analysis with Scan To 39 Pri
Краткое содержание страницы № 5
MB260 Preface Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki assumes no responsibility for the results of errors beyond its control. Oki also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by O
Краткое содержание страницы № 6
MB260 For Europe/Asia This machine complies with IEC 60825-1:1993+A1:1997+A2:2001 standard, is classified as laser class 1 product and is safe for office/EDP use. It contains one class 3B laser diode, 10.72 mW max, 770-795 nm and other class 1 LEDs (280 µW at 639 nm). Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator. For Nort
Краткое содержание страницы № 7
MB260 Positions of Safety labels on the machine The device has warning labels at the positions shown below. For your safety, you must never touch these surfaces when you remove a paper jam or when you replace the Toner cartridge. Symbols for the main power switch In accordance with IEC 60417, this machine uses the following symbols for the main power switch: - means POWER ON. - means POWER OFF. - 3 - 1 - Preface - Environmental Information - Software use license
Краткое содержание страницы № 8
MB260 EMC Note to users in the United States of America This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica
Краткое содержание страницы № 9
MB260 Environmental Information - 5 - 1 - Preface - Environmental Information - Software use license
Краткое содержание страницы № 10
MB260 Software use license CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THE PRESENT LICENSE BEFORE OPENING THE SEALED ENVELOPE CONTAINING THE SOFTWARE. OPENING THIS ENVELOPE INDICATES THAT YOU ACCEPT THESE TERMS AND CONDITIONS. In case you should not accept the terms of this license, the CD-ROM packaging should be returned to the retailer unopened, along with the other components of the product. The purchase price of this product will be refunded. No refunds will be made for products if th
Краткое содержание страницы № 11
MB260 Applicable law This license is under the French law. Any dispute following the interpretation or execution of this license will be submitted to the Paris Court. Given the continuous technology development, the manufacturer reserves the right to modify the technical specifications indicated for this product, at any time, without prior notice, and/or to stop manufacturing of the product. All the names of the products and brands that could be trademarks registered by their respective owner
Краткое содержание страницы № 12
MB260 Installation Location conditions By choosing an appropriate location, you preserve the longevity of the machine. Check that the selected location has the following characteristics: - Choose a well ventilated location. - Make sure not to obstruct the ventilation grids located on the left and right sides of the device. During the installation, make sure to place the machine thirty centimeters away from the surrounding objects so all the lids can be easily opened. - Make sure that this lo
Краткое содержание страницы № 13
MB260 - If liquid or metallic item gets accidentally inside the machine, turn it off immediately, unplug the power cord and contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard. - In case of heat, smoke, unusual smell or abnormal noise emissions, turn the machine off, unplug the power cord immediately and contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard. - Avoid using the machine during an "electric storm", this can
Краткое содержание страницы № 14
MB260 - Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of paper or masters. - For environmental reasons, do not dispose of the product or expended supply wastes at household waste collection point. Disposal can take place at our authorised dealer or at appropriate collection sites. - Our products are engineered to meet the high standards of quality and functionality, and we recommend that you only use the expendable supplies availab
Краткое содержание страницы № 15
MB260 Rules for use symbols WARNING Indicates important safety notes. Ignoring these notes could result in serious injury or death. Be sure to read these notes. Refer to the security notices presented in the Safety booklet. CAUTION Indicates important safety notes. Ignoring these notes could result in moderate or minor injury, or damage to the machine or to property. Be sure to read these notes. Refer to the security notices presented in the Safety booklet. Important Indicates points to pay
Краткое содержание страницы № 16
MB260 Terminal description Front and Back sides 1. Control panel 8. Manual input tray 2. Paper jam cover 9. Paper tray 3. Power supply cord connection 10. Cartridge access cover 4. On/Off switch 11. Fold-down stopper for paper delivery 5. Slave USB connection (for PC) 12. Paper output 6. Master USB connection (USB key) 13. Smart card insertion point 7. Manual paper feed setup guides - 12 - 2 - Installation
Краткое содержание страницы № 1
Краткое содержание страницы № 2
MB260 Dear customer For your security and comfort, we urge you to carefully read the Safety booklet before attempting use. In buying this multifunction machine, you have opted for a quality OKI product. Your device satisfies all of the different needs of a modern office automation tool. This machine allows you to scan in colour, to fax, print and copy in black and white. You can connect the multifunction device to your PC (Microsoft Windows 2000/XP/Vista) or Mac/Linux. Install the software inc
Краткое содержание страницы № 3
MB260 ID Card Copy mode 18 Special setup for the copying 19 Contents Resolution setup 19 Zoom setup 19 Dear customer I Analysis origin setup 20 Consumables I Contrast setup 20 Preface 1 Brightness setup 20 Laser Safety Information 1 Paper type setup 20 For Europe/Asia 2 Paper tray selection 20 For North America 2 Flat-bed analysis margins setup 20 Positions of Safety labels on the machine 3 Left and right printing margins setup 20 Symbols for the main power switch 3 Top and bottom printing margi
Краткое содержание страницы № 17
MB260 Command panel 1. Screen. 11. Key : stops the current operation. 2. Digital keypad. 12. Key : sets up the activation delay and toner save in 3. Key : document analysis to the PC or a media copy mode. (USB key). 13. Key : access to print menu (print functions list, 4. Key : local copy. machine settings, etc.). 5. Key : stops the current PC print job. 14. Key : analysis resolution setup. 6. Key : Validation. 15. Key : contrast setup. 7. Key OK: confirms the displayed selection. 16. Icon : r
Краткое содержание страницы № 18
MB260 Packaging contents Device installation The packaging contains the items listed below: 1 Unpack the device. 2 Install the device respecting the security notices Multifunction device stated at the beginning of this booklet. 3 Remove all stickers from the machine. 4 Remove the plastic protection film from the screen. Feed cassette paper insertion Before inserting paper, refer to the Important paragraph Paper recommendations, page 10. Your device accepts a number of formats and types of pa
Краткое содержание страницы № 19
MB260 3 Setup the back side feed cassette stop by pushing assure the maximum copies per cartridge. the "PUSH" lever (A). Hold it by its handle. Then adjust the lateral paper guides to the paper format by pushing lever (B) located on the left guide. Adjust the length paper guide to the paper format by pushing lever (C). 4 Insert the cartridge in its slot by pushing it until it clicks (last move down) as shown on the picture below. 4 Take a paper stack, pull the paper off and align it on a
Краткое содержание страницы № 20
MB260 1 Select the desired language using the or Starting your device buttons and confirm with OK. The setup is now complete and the functions list is Device connection automatically printed out. Before plugging the power cord, it The LCD screen displays the message PAPER EMPTY if no WARNING is imperative to refer to the Safety paper has been loaded in the paper tray (see Loading booklet. paper in the main unit tray, page 10). Once paper has been loaded, printing will resume. 1 Make sur
