Краткое содержание страницы № 1
DSS3450
DSS3450+1
Owners Manual
OWNER'S MANUAL
Краткое содержание страницы № 2
Basic Setup 19 Contents Setting the Day and Time 19 Welcome 5 Activating Caller ID on Call Waiting 20 Terminology used in this Manual 5 Activating Distinctive Ring 20 Product Overview 6 Activating Key Touch Tone 20 Parts of the Handset 7 Setting up Voice Mail 20 Parts of the Base 8 Programming One-Touch Voice Handset Icons 9 Mail Access 21 The Standby Screen 10 Resetting the Voice Message Using the Interface 11 Waiting Indicator 21 Using the Four-way Function Key 11 Activating Name Tag (POP ID)
Краткое содержание страницы № 3
Deleting Phonebook Entries 28 Volume 37 Deleting All the Phonebook Adjusting the Ringer Volume 37 Entries at Once 29 Adjusting the Earpiece and Speaker Volume 38 Copying Phonebook Entries Adjusting the Audio Tone and Clarity Boost 38 to Another Handset 29 Finding a Lost Handset 38 Customizing Your Phone 30 Using Hold, Conference, and Transfer 39 Changing the Handset Banner 30 Placing a Call on Hold 39 Selecting Ring Tones 31 Conferencing 39 Activating AutoTalk 32 Transferring a Call 40 Activatin
Краткое содержание страницы № 4
Maintenance 46 Battery Replacement and Handling 46 Battery Contact Maintenance 46 Low Battery Alert 47 Talk Time, Standby Time, and Storing the Handset on the Base 47 Troubleshooting 47 Resetting the Handset 47 Resetting the Handset without the Base 48 Changing the Digital Security Code 49 Traveling Out of Range 49 Common Issues 49 Liquid Damage 52 Specifications 53 Index 54 Warranty 55 [4]
Краткое содержание страницы № 5
Welcome Thank you for purchasing a Uniden Multi-Handset phone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 3-way conference call (2 handsets and an outside line), while two other handsets are making an intercom call. You can now place a fully featured cordless handset anywhere in your home or office where AC power is available to connect t
Краткое содержание страницы № 6
Standby The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present. Station Any handset or the base. Talk A telephone line has been activated on the handset enabling a dial tone. Product Overview Main Features: 2.4GHz Digital Expandable System 10 Speed Dial Locations Expands up to 4 Handsets Last 3 Number Redial on handset Caller ID* Copy Phonebook Entries to Another Handset*** - Caller ID on Call Waiting* Call Transfer*** - Distinctiv
Краткое содержание страницы № 7
1. Handset Antenna Parts of the Handset 2. Headset Jack Cover 3. Beltclip Hole 4. Speakerphone Speaker and Ringer 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 9. [menu/clear] key 10. [redial/pause] key 11. [ / flash] key (talk/flash) 12.[] key (phonebook) 13. [*/tone/<] key 14. [xfer/intercom] key 15. [select/ ] key (select/messages) 16.[] key (up) 17.[] key (end call) 18.[] key (caller ID) 19.[] key (down) 20. [#/>] key (pound) 21.[] key (speaker) 22. Han
Краткое содержание страницы № 8
Parts of the Base 43 42 25 26 27 28 29 30 24 31 35 36 38 40 37 33 32 34 41 39 24. Base charging contacts 31. [pause] key 37. Base Microphone 25. Base Speaker 32. [hold] key 38. [speaker] key and 26. [memory] key 33. [int'com/xfer] key speaker LED (speaker) 27. Charge LED (intercom/transfer) 39. [flash] key 28. in use LED 34. [dnd] key and LED 40. [redial] key 29. Base Antenna (do not disturb) 41. [mute/find hs] key (find handset) 30.[] keys 35. [*/tone] key 42. DC IN 9V Jack (Volume Up/Down) 36.
Краткое содержание страницы № 9
Handset Icons ICON STATUS DESCRIPTION Standby/Talk The battery icon indicates the handset battery status: full, medium, low, and empty. Standby The ringer off icon indicates that the ringer is turned off. Talk The mute icon appears when you mute the handset. Talk The boost icon appears when the Clarity Boost feature is activated. B The speaker icon appears when the handset speaker phone is in use. Talk P Talk The privacy icon appears when Privacy Mode is turned on. [9]
Краткое содержание страницы № 10
The Standby Screen When the phone is in standby, the handset display shows the following items: [10]
Краткое содержание страницы № 11
Using the Interface Using the Four-way Function Key Your handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the Phonebook. Move the key to the right to access Caller ID information. To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves and operates. Using the Handset Menus T
Краткое содержание страницы № 12
Entering Text from Your Handset You can use the number keypad on your phone to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, then the number on the key. If two letters in a row use the same number key, enter
Краткое содержание страницы № 13
Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: • The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch. The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fluorescent lighting. Don't place the base in direct sunlight or subject it to high temperatures. The battery may not charge
Краткое содержание страницы № 14
Wall Mounting the Base This phone can be mounted on any standard wall plate. 1. Snap the wall mount adapter into the notches on the base top. 2. Plug the AC adapter into the DC IN 9V jack. 3. Route the AC adapter cord through the molded wiring channel as shown. 4. Plug the AC adapter into a standard 240V AC wall outlet. 5. Plug the telephone line cord into the TEL LINE jack. 6. Plug the telephone line cord into the telephone outlet. 7. Align the mounting slots on the base with the mounting posts
Краткое содержание страницы № 15
Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Try to mount your phone within 1.5m of a working phone jack to avoid excessive lengths. Make sure the wall material is capable of supporting the weight of the base and handset. Use #10 screws (minimum
Краткое содержание страницы № 16
Installing the Rechargeable Battery Use only the Uniden BT-909 rechargeable battery pack supplied with your cordless telephone. Follow the steps below to install a battery. 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2. Place the battery pack in the battery compartment with the connectors on the battery and on the compartment aligned . 3. Place the battery case cover back on the handset and slide it upwards un
Краткое содержание страницы № 17
Connecting the Base and Charging the Handset 1. Connect the AC adapter to the DC IN 9V jack. 2. Connect the AC adapter to a wall outlet that is not controlled by a switch. 3. Place the handset in the base with the LCD screen facing forward. 4. Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts. 5. Charge your handset at least 15-20 hours before plugging into t
Краткое содержание страницы № 18
Installing the Belt Clip 1. Line up the holes on each side of the handset. To attach the belt clip, insert into the holes on each side of the handset. Press down until it clicks. 2. To remove the belt clip , pull either side of the belt clip to release the tabs from the holes. Testing the Connection To test your connection try making a call. If your call connects, the settings are fine. If your call does not connect check the following: 1. Check the AC adapter cord. Make sure it is securely conn
Краткое содержание страницы № 19
Changing the Dial Mode (Australian Model Only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don't get a dial tone or can't connect to the telephone network, please follow the steps below to modify your phone’s settings: 1. Pr
Краткое содержание страницы № 20
Activating Caller ID on Call Waiting Your phone supports Caller ID on Call Waiting (CIDCW), so you see the name and number of someone who calls when you're already on the line. You need to subscribe to these features with your phone company before you can use them. The Caller ID on Call Waiting service is currently unavailable in NZ. To let your phone support these features, follow the steps below: 1. Press [menu/clear]. Select the GLOBAL SETUP menu, then the CIDCW submenu. 2. Move the cursor to
