Краткое содержание страницы № 1
INSTRUCTION MANUAL
CAS-D6325
DECT 6.0 Cordless Telephone
with Answering System & Caller ID
IMPORTANT
Charge the handset battery pack for a full 15-20 hours
before using your cordless handset for the first time.
SANYO Canada Inc.
www.sanyo.ca
U UC590EH.indd EA C590EH.indd EA 8 8/19/2008 11:38:54 AM /19/2008 11:38:54 AM
Краткое содержание страницы № 2
Introduction Congratulations on your purchase of the CAS-D6325 cordless telephone from SANYO. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in DECT 6.0 technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features � 1.9GHz DECT 6.0 System Answering System Features � Caller ID/Call Waiting with Phonebook Match � Digital T apeless Recording � Store 30 Caller ID Numbers � Up to 13 Minutes
Краткое содержание страницы № 3
CONTENTS Getting Started Introduction ......................inside front cover SETTING UP THE PHONEBOOK .......E20 Features ............................inside front cover Creating Phonebook Entries .................. E20 Finding a Phonebook Entry .................... E21 CONTENTS ..........................................E1 Editing an Existing Phonebook Entry .... E21 Phonebook Checking the Package Contents ............... E3 Storing Caller ID or Redial Numbers Terminology Used in this Manual .
Краткое содержание страницы № 4
USING CALLER ID, CALL WAITING, USING THE ANSWERING AND REDIAL LISTS .................E33 SYSTEM ...................................E40 Using the Caller ID List .......................... E33 Turning Your Answering System On and Off .............................................. E40 Making a Call from a Caller ID Record .. E33 Reviewing Messages .............................. E40 Deleting Caller ID Numbers ................... E34 Screening Calls ....................................... E42 Usin
Краткое содержание страницы № 5
Checking the Package Contents Make sure you have received the following items in the package. � Base unit (1) � Rechargeable batteries (5) � Telephone cord (1) � Answering system wallet card � Chargers (4) � Belt clips (5) � Wall mount bracket (1) � Quick reference guide � Handsets (5) � AC adapters (5) � Battery order sheet (1) � This instruction manual Terminology Used in this Manual Standby The handset is not in use. If it is off the cradle, no line has been activated. No dial tone is present
Краткое содержание страницы № 6
Parts of the Phone Handset 1. Headset jack cover 5 2. Belt clip hole 3. Speaker 6 1 4. Handset battery compartment 5. new message LED 2 6. Handset earpiece 7 3 7. LCD display 14 8. CLEAR/INT’COM key 8 15 9. key (up) 9 16 10. /FLASH key (talk/flash) 10 17 11. key (phonebook/left) 18 11 12. */TONE key 13. REDIAL/PAUSE key 4 14. MENU/SELECT key 15. /MUTE key (messages/mute) 12 19 16. key (caller ID/right) 13 20 17. key (end call) 21 18. key (down) 22 19. # key 20. key (speak
Краткое содержание страницы № 7
Base 26 27 28 29 23 30 31 24 32 25 33 34 35 36 37 23. Base charging contacts 31. key (delete) 24. CHARGE LED 32. key (play/stop) 25. Base microphone 33. FIND HS key (find handset) 26. Base speaker 34. key (repeat) 27. VOLUME +/- keys 35. ON/OFF key (answering system on/off) 28. message counter LED 36. DC IN 9V jack 29. GREET key (record/select greeting) 37. TEL LINE jack 30. key (skip) E5 U UC590EH.indd E5 C590EH.indd E5 8 8/19/2008 11:38:56 AM /19/2008 11:38:56 AM
Краткое содержание страницы № 8
GETTING STARTED Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: � The location should be close to A Av void noise sources such oid noise sources such as a window by a street as a window by a street both a phone jack and a continuous A Av void heat sources, such oid heat sources, such with heavy traf with heavy traffic fic as radiators, air ducts, as radiators, air ducts, power outlet (one wh
Краткое содержание страницы № 9
GETTING STARTED Installing the Battery IMPORTANT Use only the SANYO rechargeable battery pack supplied with your cordless telephone. 1. Press in on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. RED RED BLACK BLACK BLACK BLACK RED RED 2. Plug the battery cable into the battery jack. Be sure to match the red and black wires to the label near the jack. The cable should snap into place. Gently pull Click Click on the battery ca
Краткое содержание страницы № 10
GETTING STARTED Connecting the Base and Charging the Handset 1. Connect the yellow-tipped AC adapter cord to the DC IN 9V jack. Route the cord. Route the cord. 2. Connect the AC adapter to a standard 120V AC wall outlet. DO NOT use an AC outlet controlled by a wall switch. 3. Place the handset in the base with the LCD screen facing forward. 4. Make sure that the CHARGE LED illuminates. If the LED does not T To o AC AC outlet outlet illuminate, check to see that the AC adapter is plugged in
Краткое содержание страницы № 11
GETTING STARTED Connecting the Charger Route the cord. Route the cord. 1. Connect the black-tipped AC adapter cord to the DC IN 9V jack and to a standard 120V AC wall outlet. 2. Place the handset in the charger with the LCD screen facing forward. 3. Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time. T To o AC AC outlet outlet T To o DC IN 9V DC IN 9V AC adapter (supplied) AC adapter (supplied) Connecting to the Phone Line 1. O
Краткое содержание страницы № 12
GETTING STARTED Changing the Dial Mode Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most base networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you will need to change your phone’s dial mode. If you don’t get a dial tone or can’t connect to the telephone network, please follow the steps below to modify your phone’s settings: 1. Press M
Краткое содержание страницы № 13
GETTING STARTED 5. Plug the AC adapter into a standard 120V AC wall outlet. 6. Plug the modular cord into the TEL LINE jack. 7. Route the modular cord through the hole of the wall mount bracket as shown. 8. Plug the modular cord into the telephone wall jack. 9. Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. Notes: � DO NOT use an AC outlet controlled by a wall switch. � To mount the phone directly on the wall, in
Краткое содержание страницы № 14
GETTING STARTED Using the Interface Reading the Display In standby During a call Handset ID and banner Call duration Number of new Caller ID calls received The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting in your voice mailbox. The privacy icon appears when the Privacy Mode is turned on. The speaker icon appears when the speaker phone is in use. The mute icon appears while the microphone is muted. The battery ico
Краткое содержание страницы № 15
GETTING STARTED Using the Four-way Function Key Your handset has a four-way function key that allows you Up Up to move the cursor or pointer on the display and access the most commonly used features at the touch of a button. By moving this key to the left, you open the phonebook. Move the key to the right to access Caller ID information. To use this four-way key, place your thumb over the key on the handset and move to the four positions to get the feel of how it moves V View the iew the
Краткое содержание страницы № 16
GETTING STARTED Entering Text from Your Handset You can use the number keypad on your handset to enter text by referring to the letters printed on each number key. When you press the number key in a text entry field, the phone displays the first letter printed on the number key. Press the number key twice to display the second letter and three times to display the third. Capital letters are displayed first, then lower case letters, and then the number on the key. If two letters in a row use
Краткое содержание страницы № 17
GETTING STARTED Using Multiple Bases The handsets supplied with your phone can be registered to a total of four different CAS-D6325 bases. Once your handset is registered to more than one base, you can set the handset to search automatically the available base, or you can select manually which base the handset should connect to (for example, if you have one base with an answering machine, you can tell the handset to connect that base to check messages). Note: � To confirm how many bases the
Краткое содержание страницы № 18
GETTING STARTED Selecting the Base When your handset is registered to another base, it will automatically connect to the base. A base ID (that is for the handset only) will be assigned in the order of registration. You can either select a base you want to use manually, or set to AUTO. If you set to AUTO, and the handset is out of range, it automatically searches the available base in order of base ID. 1. With the phone in standby, press MENU/SELECT. Select the HANDSET SETUP menu, and then the
Краткое содержание страницы № 19
GETTING STARTED Activating Personal Ring You can assign special ring tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you’ve assigned a personal ring to a specific number, the selected ring will sound so you know who is calling. ( See page E21 for how to assign a personal ring tone.) To turn the personal ring on or off, follow these steps: 1. Press MENU/SELECT. Select the HANDSET SETUP menu, and then the PERSONAL RIN
Краткое содержание страницы № 20
GETTING STARTED 1. Press MENU/SELECT. Select the GLOBAL SETUP menu, and then the CID/PHBK MATCH submenu. 2. Move the cursor to select ON or OFF. 3. Press MENU/SELECT. You will hear a confirmation tone. Changing the Handset Banner Each handset will display a banner name once it is registered to the base. The default banner is Handset #1, Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more than one handset, the banner name identifies y
