Краткое содержание страницы № 1
Oricom P80 Series
1.8GHz DECT Cordless phone
Keep this user guide
for future reference.
WARNING
DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT,
AS THERE IS A RISK OF EXPLOSION AND/OR INJURY. USE ONLY Ni-
MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS USER
GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES
Краткое содержание страницы № 2
Contents Pack Contents............................................................................................................. 5 GETTING STARTED...................................................................................................6 Key Layout .................................................................................................................. 6 LCD display on the handset ................................................................................
Краткое содержание страницы № 3
Deregister ............................................................................................................. 17 PIN code............................................................................................................... 18 Reset .................................................................................................................... 18 OTHER FEATURES .................................................................................................18 Key
Краткое содержание страницы № 4
E Environment and safety • Avoid exposure of this telephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the mains supply and telephone socket during a storm. • Do not use the handset in a
Краткое содержание страницы № 5
Do not use your telephone during an electrical storm thunderstorm as it is possible to get an electric shock. Refer to information contained in the White pages directory. Use only the mains adapter supplied with this product. Incorrect adapter polarity or voltage can seriously damage the unit. Adaptor for base:- Input: 230 VAC 50 Hz Output: 6VDC 400 mA Adaptor for Charger Input: 230 VAC 50 Hz Output: 9 VDC 150 mA Pack Contents Depending on the model you have purchase
Краткое содержание страницы № 6
GETTING STARTED GETTING STARTED Key Layout LCD Display Redial Phonebook Talk / Recall Off / Exit CID / CID / Scroll backward Scroll forward # / Keylock / / Pause Ringer On-Off Page Intercom / OK / Mute / Conference Program Delete 6
Краткое содержание страницы № 7
LCD display on the handset Base Ringer Handset Setting Ringer Recall Registration Setting duration Ringer programming Battery Signal Menu up/down Character Display Left Arrow Right Arrow Ringer Off Message Phonebook Key lock Off hook Mute New CID waiting The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringe
Краткое содержание страницы № 8
Initial Setup 1. Connect the output plug of the mains adapter to the adapter socket on the back of the base unit and the mains adapter to the wall mains supply. 2. Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall phone socket. 3. Remove the battery door on the handset by lifting the battery door outward from the bottom. 4. Insert 2 x AAA rechargeable batteries supplied into each, observing their polarities, into the battery compartment.
Краткое содержание страницы № 9
BASIC OPERATIONS BASIC OPERATION During standby ORICOM 1 When the phone is in standby, the LCD displays the handset label. The handset number related to the connected base will also be displayed right justified. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base. Answering an incoming external call JOHN When there is an incoming call, the phone rings and flashes. If a CID record is rec
Краткое содержание страницы № 10
Predialing Pre-dial allows you to enter a telephone number and verify it on the screen before you place the call. The screen displays the last 12 digits dialed but you can enter up to 20 digits. 1. Enter the phone number. 2. To enter a pause, press and hold . A pause is displayed as “P”. # 3. When you enter more than 12 digits, turns on. If you attempt to enter more than 20 digits, you’ll hear a reject tone. 4. If you make a mistake, press to erase one digit at a tim
Краткое содержание страницы № 11
When you end a call, the timer will be displayed for 5 more seconds before the screen returns to the handset label. Adjusting the volume During a call you can adjust the earpiece volume. Press to adjust the receiver volume. The display shows the volume level of high “OOO”, medium “OO” or low “O”. NOTE: When you hang up the volume with return to the default level. Muting the call 1. Press MUTE to mute the call. turns on. The caller would not be able to hear you but you
Краткое содержание страницы № 12
1. When the handset receives a second call, the number of the caller appears on the display. It will display for 20 seconds or until you press a key on the phone. Press listen for dial tone then Press 2 to put the current call on hold and talk with the second caller. 2. Subsequent presses of listen for dial tone then Press 2 will toggle you between these 2 callers. Caller information of this second call will be stored in the call log. CALLER ID CALLER ID If you
Краткое содержание страницы № 13
2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to save it. The record is now save into the phonebook. The original CID record in the call list will now show the new name tha
Краткое содержание страницы № 14
3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to save it. You have saved the number as a phonebook record. This record in the redial list will now show the name that you have assigned to this number. Deleting a previously dialed number While you are viewing a previously dialed number, you can delete it by 1. Press DEL . 2. Press OK
Краткое содержание страницы № 15
The number buttons are also inscribed with letters for entering the name. By repeatedly pressing the appropriate button, upper case letters as well as numbers and special characters can be entered. KEY 1x 2x 3x 4x 5x 1 Space 1 2ABC A B C 2 3DEF D E F 3 4GHI G H I 4 5JKL J K L 5 6MNO M N O 6 7PQRS P Q R S 7 8TUV T U V 8 9WXYZ W X Y Z 9 0 0 * # Editing phonebook records 1. During standby mode, press . 2. Press to search f
Краткое содержание страницы № 16
Deleting the entire phonebook 1. While reviewing the phonebook, press and hold DEL . 2. Press OK when prompted to confirm the action. The phonebook is now empty. CUSTOMISING THE PHONE PROGRAMMING THE PHONE Press PROG during standby to enter program mode. All programming icons will appear in order with the first icon on the left flashing. You can then press to select the item you would like to program. During programming, you can press to go back to progr
Краткое содержание страницы № 17
You cannot program the base ringer if the handset has lost link with the base. UNAVAIL will be displayed. Re-establish the link and try again. Recall duration When you are talking on the phone, pressing will send a flash signal. Recall settings are; Australia (Recall 1)100ms and New Zealand (Recall 2) 600ms. You should not need to change these settings. Press PROG during standby and press until you see flashing. 1. Press OK to select. The current duration is now disp
Краткое содержание страницы № 18
PIN code A PIN is required for registration and deregistration. The ex-factory PIN is 0000 but you can change this code. 1. Press PROG during standby follow by the 8 key. 2. Enter the current PIN and press OK . 3. Enter the new PIN. It can contain from 0 up to 8 digits. Press OK . 4. Repeat the new PIN and press OK to confirm the new code. You will hear a confirmation tone if it is successful, or a reject tone if the same PIN is not entered. Reset If you reset the
Краткое содержание страницы № 19
Shortcut to turn handset ringer on/off You can use this shortcut to turn on/off the handset ringer when the phone is in standby. Simply press and hold . appears whenever the handset ringer is turned off. Message waiting indication You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provider to use this feature. When you receive a voice message, will appear on the display. When you retrieve your messages the message will turn off.
Краткое содержание страницы № 20
Making an internal call When the phone is in standby, 1. Press INT . turns on and you’ll hear an internal dialing tone. 2. Press the number of the handset that you want to call. (Or you can press the handset number first, followed by INT .) You will hear a busy tone if the other handset is not available. To end an internal call, press or return the handset to the base cradle. You will be alerted with short beeps if you receive an external call during your intercom. Caller
