Краткое содержание страницы № 1
CONTENTS
CONTENTS
1 ENVIRONMENT AND SAFETY .............................................................................3
2 SETTING UP YOUR PHONE..................................................................................4
PACK CONTENTS..............................................................................................................................................4
INSTALLING YOUR PHONE....................................................................................
Краткое содержание страницы № 2
SETTING UP YOUR PHONE SETTING UP YOUR PHONE 2 Setting up your phone 1 Environment and safety Pack Contents • Avoid exposure of this telephone to moisture or liquid. Depending on the model you have purchased the pack should contain the items listed below. If any of • To prevent electric shock, do not open the handset or base cabinet. these items are missing, please contact the retailer where you purchased the product. • Avoid metallic contact (e.g. metal clips, keys) between the b
Краткое содержание страницы № 3
SETTING UP YOUR PHONE ABOUT YOUR PHONE 3 Personalizing your phone 4 About your phone Your Oricom M5000 Handset Tones & Volumes Refer to handset or base unit as suggested below. PHONE button Set your handset’s ringer volume: 1. Press VOLUME button. Display will show current level 1 to 5. Arrow LEFT / Arrow RIGHT RECALL / CALLER 2. Press CALLER DISPLAY or R button, to select VOLUME level 1(lowest) to 5(loudest). button DISPLAY 3. Press VOLUME button to confirm. bu
Краткое содержание страницы № 4
ABOUT YOUR PHONE ABOUT YOUR PHONE LED Indicator lights 5 Making Calls Note: OUT-OF- RANGE warning You may be out-of-range with the BASE UNIT if you hear a warning tone or the sound becomes distorted. Either 1. Move handset closer within 20 seconds until the tone stops. Otherwise, your call may be cut off. Answering machine ON/OFF Base unit’s speaker phone 2. Reposition & reconnect BASE UNIT to a phone connection closer to where the handset will be used indicator indicator
Краткое содержание страницы № 5
ABOUT YOUR PHONE ABOUT YOUR PHONE Mute the microphone 6 Caller Display (Caller ID) To put a call on hold, so that the person on the other end cannot hear you: Check Caller Display records 1. Press MUTE/DEL button. is shown on the display 2. To get back the call, press the MUTE/DEL button again. If you subscribe to this service, you can see the phone numbers of incoming calls before you answer. Contact your service provider to confirm availability in your area. The M5000 will s
Краткое содержание страницы № 6
ABOUT YOUR PHONE ABOUT YOUR PHONE Switch between calls During a call, you will hear two beeps periodically to notify you of an incoming call. To answer the second 8 Answering machine call, during a call: Callers can hear one of two pre-recorded messages: 1. Press RECALL button, you will hear dial tone. OGM1 - Gives the caller an option to leave a message ‘Please leave a message after the beep’ OGM2 - Gives NO option to leave message ‘Please call later’ 2. Press ‘2’ on the key p
Краткое содержание страницы № 7
ABOUT YOUR PHONE ABOUT YOUR PHONE Delete messages 9 Remote operation To delete the CURRENT message: There is a 3 digit code you need to dial home to check your messages. Unless you set a different code (any 1. Press PLAY/PAUSE button to play messages/memos. 3 digits) it is 321. 2. Press & Hold DEL/X button DURING playback for 2 seconds. You will hear ‘message erased’. Set a remote security code To delete ALL messages: 1. Press CODE button (on the under side of the base unit) u
Краткое содержание страницы № 8
ABOUT YOUR PHONE ABOUT YOUR PHONE 10 Multi-handset use Your M5000 series phone can have up to 5 handsets registered to 1 base unit. Each handset has its own number HS-1, HS-2, HS-3, HS-4, & HS-5 shown on the left-hand side of the display. With 2 or more handsets you can: • Make intercom calls while on an outside call • Switch between an out side call & intercom call • Transfer an out side call from one handset to another • Set a 3-way conference call between yourself, an outside cal
Краткое содержание страницы № 9
ABOUT YOUR PHONE ABOUT YOUR PHONE Product specifications 12 Appendix Troubleshooting Problem Possible cause(s) Solution(s) 1. The base unit is not properly connected 1. Check CONNECTION to power & telephone line. No dial tone to electricity or to the telephone sockets. 2. Move handset CLOSER to base unit 2. Too far from the base unit. 3. CHARGE battery 3. Battery is charge low. 4. RE-INSERT batteries check + & - 4. Incorrect battery polarity. 1. The handset is not register
Краткое содержание страницы № 10
ABOUT YOUR PHONE ABOUT YOUR PHONE 13 Notes for operation in New Zealand 14 Warranty Information The grant of a Telepermit for any item of terminal equipment indicates only that TELECOM has accepted This product is covered by a 12 month warranty against defective workmanship or parts. The warranty does that the item complies with the minimum conditions for connection to its network. It indicates no not extend to damage caused by misuse, negligence, excessive voltage, faults on the te
