Краткое содержание страницы № 1
C4030 Handset Standard 1.00
Table of Contents
Safety and initial setup ............................................................. 5
Safety information ............................................................................................... 5
Installing the Handset ......................................................................................... 6
Installing and replacing batteries ....................................................................
Краткое содержание страницы № 2
C4030 Handset Standard 1.00 Using Handset Menus ........................................................... 20 Selecting a handset menu ................................................................................. 20 Using keypad shortcuts ..................................................................................... 21 Private Phonebook ............................................................................................ 21 Character Table .......
Краткое содержание страницы № 3
C4030 Handset Standard 1.00 Safety and initial setup Safety information Read the following information before you use the handset. Safety Precautions Make sure the adapter voltage is the same as the electrical outlet voltage. The C4030 handset uses radio signals and does not guarantee a connection in all circumstances. Do not rely on a cordless telephone to make emergency- calls. Never use your handset: • in the vicinity of electrical detonators in shielded rooms
Краткое содержание страницы № 4
C4030 Handset Standard 1.00 Sensitive Electronic Environment Operational DECT phones can influence sensitive electronic equipment, for example, laboratory equipment or medical equipment. This influence can appear when DECT phones operate near equipment. Do not place the DECT phone on or within a meter of sensitive electronic equipment even in standby mode. Check for small metal objects in the C4030 handset earpiece/mouthpiece before using the handset. Do not stor
Краткое содержание страницы № 5
C4030 Handset Standard 1.00 Wall mounting the Charger: 1. Drill two holes into the wall, with vertical spacing of 65 mm, and insert the screws. 2. Plug the power cable into the charger. 3. Hang the charging unit on the screws. 4. Plug the power cable into the wall socket. 5. Place the telephone handset on the charger. Note: Only use the charging unit supplied with the device. Installing and replacing batteries Read the following information before you handle
Краткое содержание страницы № 6
C4030 Handset Standard 1.00 To install or remove batteries: 1. Press the top of the battery compart- ment lid and slide it down. 2. Insert new batteries according to the marking in the battery compart- ment. Ensure correct polarity for each battery. 3. Slide the lid back in place. Battery charging To extend the service life of the batteries: Charge batteries at least 15 hours before initial use of handset. To attain maximum power output, complete three to five ch
Краткое содержание страницы № 7
C4030 Handset Standard 1.00 Battery Life (with fully charged batteries) Talking time: up to 16 hours Standby time: up to 10 days Battery discharging Maintain optimum operating time by periodically discharging batteries. The batteries can be charged and discharged hundreds of times. Replace the batteries if operating time (talk and standby time) is significantly shorter than usual. To discharge batteries: Note: Only use the following method to discha
Краткое содержание страницы № 8
C4030 Handset Standard 1.00 C4030 Handset features Earpiece Incoming Call Indicator Display Headset connecter Alphanumeric Keypad Microphone Display screen The C4030 displays five lines of information: First: Displays several icons. Second: Displays text, and in standby mode, date and time. Third: Displays text, and in standby mode, identification data. Fourth: Displays text. Fifth: Displays functionality of the handset, the arrow keys, and key. 10
Краткое содержание страницы № 9
C4030 Handset Standard 1.00 Handset keys The numerical keys can be used to dial numbers or edit entries in, for example, the telephone book. Executes the display command on the last line. Makes, accepts, or ends a call. Starts "Recall" during a call. Moves up one menu level. Cancels a character during character input. Cancels whole input when pressed for at least 2 seconds during character input. Returns to "standby mode" when pressed for at least 2 seconds. S
Краткое содержание страницы № 10
C4030 Handset Standard 1.00 Icons Battery status / Charging indication. Voice mail message-waiting indication. ON : call in progress. FLASHING : incoming call. Mute Loudspeaker on. ON : locked to DECT system. Top of the list is reached. Middle of the list is reached. Bottom of the list is reached. 12
Краткое содержание страницы № 11
C4030 Handset Standard 1.00 Using the C4030 handset Handset On/Off 1. Press the key for 2 seconds to switch the handset off. 2. Press any key to switch the handset back on again. After 2 seconds, the handset switches on and displays the idle menu. Note: Use the key or the key to switch the set on again. If you use other keys for this purpose, then their function is executed immediately after the set is switched on. Example: When you press “O” to switch
Краткое содержание страницы № 12
C4030 Handset Standard 1.00 Making a call in the Pre-Dial Mode To make a call: 1. In Standby mode, dial the number using the keypad (up to 26 digits). Note: The dialed number displays on two lines when you enter a number with more then 10 digits. To display more than 20 digits, the character size is reduced. 2. Press the key to initiate the call. To correct an error: Move the cursor using the scroll arrows. or Use the key to delete a character in front of
Краткое содержание страницы № 13
C4030 Handset Standard 1.00 Volume Adjustment You can adjust your handset’s earpiece volume for your listening comfort. To adjust your earpiece 1. During a call, press the key volume: once to increase earpiece volume (or loudspeaker volume in loud speaking mode). 2. Press the key again to return to the normal level. When the call ends, the volume level switches back to the default setting. Activating Handsfree You can enable your handset as a speakerphone to al
Краткое содержание страницы № 14
C4030 Handset Standard 1.00 Silent Mode You can switch off the handset ringing in Standby mode to enable Silent mode. To enable Silent mode: 1. Enter the “Handset Sound” menu. 2. Enter the “Ringer volume” menu. 3. Select “Silent” and press the key. You can also use the shortcut 1.5.1 (see "Using Keypad Shortcuts"). Handset signalling can be switched on again by selecting another ringer volume and pressing the key. Ringer types You can select different ringer type
Краткое содержание страницы № 15
C4030 Handset Standard 1.00 Transferring a call During a call, it is possible to transfer the connected line to another number. To transfer a call: Press the key followed by the desired telephone number. You can disconnect immediately or wait for the third party to answer before disconnecting. After pressing the key you can select a number from the redial list or phonebook by using the keys. Identifying the caller Your C4030 can display the caller’s number d
Краткое содержание страницы № 16
C4030 Handset Standard 1.00 Key Lock You can lock the keypad to prevent an inadvertent key press. To lock the keypad: 1. Press the key for 2 seconds, or Press the keys: , , , . 2. Press the key twice to confirm. To unlock the keypad: Press the key or key for 2 seconds. When the key lock is active, you can answer calls as normal and use all keys during the call. The key lock reactivates at the end of the call. Time of Day You can set the handset to disp
Краткое содержание страницы № 17
C4030 Handset Standard 1.00 Access Meridian PBX features The C4030 uses feature and special codes to access Meridian PBX features. To access Meridian PBX 1. While the handset is idle, enter the features: FFC and press the key to access the Meridian PBX features. 2. Press the key to access the Meridian PBX features during a call. Flexible Feature Codes (FFC): Dial an FFC code to access handset features. Special Prefix Codes (SPRE): Dial a SPRE code plus a one o
Краткое содержание страницы № 18
C4030 Handset Standard 1.00 Using Handset Menus Selecting a handset menu Standby mode is the starting point for accessing a handset menu. To choose a function from the Press the keys as many times as Standby mode: required to view the various menus. The following menus are provided: PRV PHONBK Private Phone book. REDIAL List with last 10 dialled numbers. SETTINGS Configuration Settings. The selected menu displays on the last line o
Краткое содержание страницы № 19
C4030 Handset Standard 1.00 Using keypad shortcuts All sub-menus, functions or settings are accessible by means of associated keypad shortcuts. In each table, the number that appears in front of the sub- menu, function or setting enables you to access the desired function more quickly. 1. Press the key. 2. Enter the shortcut corresponding to a submenu, function, or setting. The keypad shortcut displays on the sec- ond line of the screen. 3. Press the key to con
Краткое содержание страницы № 20
C4030 Handset Standard 1.00 3. Depending on the character you intend to use, press the appropriate key once or several times. See "Character Table". 4. Use the key to delete the character in front of the cursor. 5. Press the key to confirm the new name. Viewing a phonebook entry: 1. From Standby mode, select the "PRV PHONBK" menu. 2. Confirm by pressing the key. The first entry in the selected phonebook displays. 3. Press the scroll keys to scroll through
