Краткое содержание страницы № 1
User’s manual
TL30100
DECT 6.0 expansion handset
for use with AT&T models
TL32100/TL32200/TL32300
Краткое содержание страницы № 2
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please thoroughly read this user’s manual for the information necessary to install your new AT&T product. For complete instructions, please refer to the manual provided with your TL32100/TL32200/TL32300 telephone. For customer service or product information, please visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: TL30100 Type: DECT 6.0 expans
Краткое содержание страницы № 3
Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual Cordless handset Charger for cordless handset with power adapter installed Battery for cordless handset Battery compartment cover
Краткое содержание страницы № 4
User’s manual TL30100 DECT 6.0 expansion handset for use with AT&T models TL32100/TL32200/TL32300 Table of contents Precautions for users of implanted Getting started cardiac pacemakers ............................26 Quick reference guide .................................2 Pacemaker patients ............................26 Charger installation .......................................5 Especially about telephone Battery installation and charging ...........6 answering systems ..................
Краткое содержание страницы № 5
You must install and See pages 5 and 6 for charge the battery easy instructions. before using the cordless handset. Your product may be shipped with a protective sticker covering the handset - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Avoid placing the telephone base too close to: • Communication devices such as television sets, VCRs, or other cordless telephon
Краткое содержание страницы № 6
Getting started Quick reference guide DIR/VOLUME MENU/SELECT Press to display the Press to scroll up while in menus. menu. Once in the menu, press Press to increase the listening volume. to select an item or save an entry or setting. Press to show directory entries when the OFF/CLEAR handset is not in use. During a call, press to While entering names or hang up. numbers in the directory, While using menus, press to move the cursor press to cancel an to the right. operation, back up
Краткое содержание страницы № 7
Getting started Quick reference guide 0 MUTE/REMOVE While entering names in During a call, press to the directory, press to mute the microphone. add a space. While predialing, press to delete digits. 1 While reviewing the While reviewing a caller redial list, directory, ID history entry, press speed dial list or caller repeatedly to add or ID history, press to delete remove 1 in front of an individual entry. the telephone number before dialing or saving # it in the directory. When rev
Краткое содержание страницы № 8
Getting started Quick reference guide EQUALIZER During an outside call, intercom call, message or announcement playback, press to change the quality of the audio to best suit your hearing. The > symbol indicates the feature to select. Main menu Play messages Answering sys >Play messages Directory Answering sys Call log Intercom Ringers Settings Website Using menus Press MENU/SELECT to enter the main menu. Press DIR or CID to scroll through menu items. Press MENU/SELECT to select or modify an
Краткое содержание страницы № 9
Getting started Charger installation Install the charger as shown below. Plug the large end of the power adapter into an electrical outlet not controlled by a wall switch. Ensure the small end of the power adapter is plugged into the power jack on the back of the charger. Route the cord through the slot. IMPORTANT INFORMATION: Use only the power adapter provided with this product. To obtain a replacement, visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada
Краткое содержание страницы № 10
Getting started Battery installation and charging Battery installation Install the battery as shown below. 1. Plug the battery 2. Insert the supplied 3. Align the cover flat connector securely battery with the label against the battery into the socket THIS SIDE UP facing compartment, then inside the handset up as indicated. slide it upwards until it battery compartment, clicks into place. matching the color- coded label. CHARGE light To replace the battery, press the tab and slide the batt
Краткое содержание страницы № 11
Getting started Battery installation and charging Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the charger to charge the battery. HANDSET 1 For best performance, keep the handset in the charger when not in use. The battery is fully charged after 16 hours of continuous charging. See Technical specifications on 10:30PM 11/20 page 33 for battery operating times. Battery status icon If t
Краткое содержание страницы № 12
Getting started Battery installation and charging NOTES: • If you are on a call in low battery mode, you hear four short beeps every 50 seconds. • When you place the handset in the charger, if no battery is installed in that handset, the CHARGE light is off and the screen shows NO BATTERY. Follow the instructions in Battery installation on page 6 to install the battery. 8
Краткое содержание страницы № 13
Adding the handset to your telephone base Adding and registering a handset About expansion handsets Before using a new TL30100 handset, you must register it with the AT&T TL32100/TL32200/TL32300 telephone system (purchased separately), the telephone system can accommodate up to five handsets. The handset with the TL32100 telephone comes as HANDSET 1. You can register up to four additional handsets to the telephone base, and the handset numbers are in numerical order (HANDSET 2, HANDSET 3,
Краткое содержание страницы № 14
Adding the handset to your telephone base Adding and registering a handset To register a handset to your telephone base: 1.Press HS LOC 1. Make sure the handset is out of the on base 4 sec telephone base or charger and alternately shows 1.Press HS LOC on base 4 sec and --:-- --/-- 2.Then press # on handset before you begin the registration. 2. Press and hold HANDSET LOCATOR on 2.Then press # on handset the telephone base for about four seconds (until the IN USE light on the telephone base
Краткое содержание страницы № 15
Adding the handset to your telephone base Deregistering all handsets You can deregister handsets. You may need to deregister your handsets if: • You have five registered handsets and need to replace a handset. -OR- • You wish to change the designated handset number of your registered handsets. You must first deregister ALL the handsets, and then register each handset you wish to use again, one at a time. Please read carefully through all the HANDSET 2 instructions on this page before beginn
Краткое содержание страницы № 16
Adding the handset to your telephone base Deregistering all handsets To register the handset(s) to the telephone base again, follow the registration instructions in Registering a handset on page 9. NOTES: • If the deregistration process is not successful, you might need to reset the system and try again. To reset, unplug the power from the telephone base and plug it back in. • You cannot deregister the handset(s) if any system handset is in use. 12
Краткое содержание страницы № 17
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, or to purchase accessories or replacement parts, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. When you call for customer service, you will need the serial number or model number found on the bottom of the telephone base or charger. The handset registration is unsuccessful. • Follow the handset registration
Краткое содержание страницы № 18
Appendix Troubleshooting I cannot get a dial tone. • First try all the suggestions above. • Move the cordless handset closer to the telephone base. You might have moved out of range. • If the previous suggestions don’t work, disconnect the telephone base from the telephone wall jack and connect to a different telephone. If there is no dial tone on that telephone either, the problem is in your wiring or telephone service. Contact your telephone service provider (charges may apply). • Your te
Краткое содержание страницы № 19
Appendix Troubleshooting My cordless handset isn’t performing normally. • Make sure the power cord is securely plugged into the telephone base. Plug the power adapter into a different, working electrical outlet not controlled by a wall switch. • Move the cordless handset closer to the telephone base. You might have moved out of range. • Reset the telephone base. Unplug the electrical power. Wait for 15 seconds then plug it back in. Allow up to one minute for the cordless handset and telepho
Краткое содержание страницы № 20
Appendix Troubleshooting The batteries do not hold a charge. • If the cordless handset is in the telephone base or charger and the charge light does not come on, refer to the item The charge light is off on this page. • Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the telephone base or charger when not in use. • If the battery is depleted, it may take approximately 30 minutes to charge the handset before it s
