Краткое содержание страницы № 1
User’s manual
E5802B/E5833B/
E1802B/E1833B
5.8 GHz cordless
telephone with caller
ID/call waiting
Краткое содержание страницы № 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety instructions on pages 41-43 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com Model #: E5802B/E5833B/E1802B/E1833B Product name: 5.8GHz cordless telephone Serial #: (found on the bottom of t
Краткое содержание страницы № 3
You must install and charge See page 7 the battery before using the STOP! for easy instructions. telephone. For customer service or product information, visit our website at www.telephones.att.com. CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: • Use only the supplied rechargeable battery or replacement battery 2422 (SKU 23402, part number 89-0047-00-00) or equivalent. To order a replacement battery, visit ou
Краткое содержание страницы № 4
User’s manual E5802B/E5833B/ E1802B/E1833B 5.8 GHz cordless telephone with caller ID/call waiting Table of contents Getting started Caller ID operation Quick reference guide .........................2 Caller ID operation .............................26 Parts checklist .........................................4 To review the call log .......................29 Telephone base installation .............5 Delete call log entries......................30 Battery installation & charging ......7 Add en
Краткое содержание страницы № 5
Getting started Quick reference guide Cordless handset CID/-VOLUME DIR /VOLUME+ While in a menu, press to scoll While in a menu, press to scoll up. down. When in idle mode, When in idle mode, press to display press to display call log entries directory entries (page 24). While (page 29). While entering names entering names, press to advance or numbers, press to move the the cursor a space. During a call, cursor to the left. During a call, press DIR to increase listening press CID to
Краткое содержание страницы № 6
Getting started Quick reference guide Telephone base VOICEMAIL Flashes when there is new voicemail (requires voicemail service from your local telephone company). CHARGE/IN USE HANDSET LOCATOR Press to make handset(s) beep (page 16). On when the cordless handset is properly positioned to charge in the telephone base. Flashes quickly while an incoming call is ringing. Flashes when one of the handsets is in use. 3
Краткое содержание страницы № 7
Getting started Parts checklist Save your sales receipt and original packaging in case you need to ship your telephone for warranty service. Check to make sure the telephone package includes the following. The model number of your telephone can be found on the label located on the bottom of the telephone base. User’s manual Quick start guide E5802B/E5833B/ E5802B/E5833B/ E1802B/E1833B E1802B/E1833B 5.8 GHz cordless 5.8 GHz cordless telephone with caller telephone with caller ID/call waiting
Краткое содержание страницы № 8
Getting started Telephone base installation Choose a central location close to a telephone jack and a power outlet not connected to a wall switch. The telephone base can be placed on a flat sur- face or mounted on a standard wall plate. For optimum range and better reception, place the telephone base in a high and open location. Avoid placing the telephone base too close to: • Communication devices such as: personal computers, computer routers, television sets, VCRs, wireless routers (wireles
Краткое содержание страницы № 9
Getting started Telephone base installation 1. Plug the small end of the larger power adapter into the power jack at the bottom of the tele- phone base. 2. Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base. 3. Route cords through slots. 5. Plug the other end of the telephone line cord into a telephone jack. 4. Plug the large end of the larger power adapter into an electrical outlet Telephone line cord not controlled by a wall switc
Краткое содержание страницы № 10
Getting started Battery installation & charging After installing the battery, you may be able to make or receive short calls. For best performance, place the handsets in the telephone base or charger to charge for 16 hours before use. You can keep the battery charged by returning the handsets to the telephone base or the charger after use. When the battery is fully depleted, a recharge takes about 12 hours. The average talk time on a fully charged battery is about eight hours, and the stan
Краткое содержание страницы № 11
Getting started Installation options Tabletop mount Wall mount Telephone outlet mounting plate with mounting studs Wall mounting The telephone base comes with the bracket mounted for tabletop use. If wall mounting is desired, a telephone outlet wall mounting plate with mounting studs is required. This mounting plate with studs may be available for purchase from many hardware or consumer electronics retailers and may require professional installation. 1. To remove the bracket, hold the te
Краткое содержание страницы № 12
Getting started Installation options 3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots and on the telephone base, then press the other bracket tabs into slots and as shown on the right. 4. Plug the power adapter into an electrical outlet not controlled by a wall switch. Plug the tel- ephone line cord into a telephone wall jack. To mount the telephone on the wall, position the mounting holes and over the telephone outlet mounting studs. Press and
Краткое содержание страницы № 13
Getting started Belt clip & optional headset Install belt clip as shown below if desired. Snap belt clip into notches on both sides of handset. To release belt clip from handset, lift one side of the belt clip out of the notch. For hands-free telephone conversations, use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To order an AT&T 2.5 mm headset, visit our website at www.telephones.att.com or call 1 (800) 222-3111; in Canad
Краткое содержание страницы № 14
Telephone operation Settings Language LANGUAGE The default language for the handset screen displays is English. To change the language to Espanol, or Francais: 1. Press MENU/SEL. 2. Press CID or DIR until the screen displays LANGUAGE. 3. Press MENU/SEL to change the current setting. 4. Press CID or DIR to choose among ENGLISH, FRANCAIS, or ESPANOL. 5. Press MENU/SEL to confirm your selection and exit. Choose dial mode The dial mode defaults to tone. If you do not have touch tone service,
Краткое содержание страницы № 15
Telephone operation Settings Each cordless handset operates individually from the other handsets. The ringer sound, ringer volume, date & time, dial mode and language must be programmed separately for each cord- less handset. Follow the steps below to program the cordless handset. To stop at any time, press OFF/CLEAR. Choose cordless handset ringer sound 1. Press MENU/SEL to begin programming. 2. Press CID or DIR until the screen displays RINGER: and the current setting. RINGER:
Краткое содержание страницы № 16
Telephone operation Settings Choose ringer volume setting 1. Press and hold CID or DIR when the cordless RINGER VOL: LOW handset is idle (not in use). This feature allows you to choose low, med, high ringer volume or turn the ringer off. 2. Press CID or DIR to choose the desired option. You will hear a sample of each ringer volume. 3. Press MENU/SEL to choose blinking ringer vol- ume and exit. NOTE: If you choose OFF, the handset ringer will be turned off, and the screen will display RING
Краткое содержание страницы № 17
Telephone operation Basic operation Making and answering calls To answer an incoming call, press PHONE/FLASH Elapsed PHONE ON 00:30 or SPEAKER, or any dial pad key (0-9, * or #). To time make a call, press PHONE/FLASH or SPEAKER, then dial a number. Press OFF/CLEAR to hang up. To predial (preview numbers before dialing), enter numbers first, then press PHONE/FLASH or SPEAKER to dial. Press CID then CHAN/DELETE anytime to make corrections when entering num- bers. The screen displays t
Краткое содержание страницы № 18
Telephone operation Basic operation Last number redial SPEAKER 00:49 While the phone is not in use, press REDIAL/PAUSE 5201314 on the cordless handset to display the last number called (up to 32 digits). To dial the number dis- played, press PHONE/FLASH or SPEAKER. Or, after pressing PHONE/FLASH or SPEAKER, press REDIAL/PAUSE to call the last number dialed. To delete this number, press REDIAL/PAUSE twice when the phone is not in use. This will clear the redial memory and leave it blan
Краткое содержание страницы № 19
Telephone operation Basic operation Handset locator If you misplace the handset(s), press HANDSET LOCATOR on the telephone base. This starts the paging tone at the handset(s) for 60 seconds to help you locate it/them. To stop the paging tone, press OFF/CLEAR on cordless handset, or place cordless handset in the telephone base. NOTES: ** PAGING ** 1. Pressing OFF/CLEAR on any cordless handset will cancel the page of that specific handset. 2. If one of the cordless handsets is charging
Краткое содержание страницы № 20
Telephone operation Options while on calls Volume control Press CID/-VOLUME to decrease the volume. VOLUME Press DIR /VOLUME+ to increase the volume. When changing the volume level, the new setting is saved. Call waiting If you subscribe to call waiting service with your local telephone company, there will be a beep if there is an incoming call while you are already on a call. Press PHONE/FLASH to put your current call on hold and take the new call. Press PHONE/FLASH anytime to switch ba
