Resumo do conteúdo contido na página número 1
PLATINUM BEAM 5R
KEEP THIS MANUAL FOR FUTURE NEEDS
Resumo do conteúdo contido na página número 2
2 XM485-V1.0-NR
Resumo do conteúdo contido na página número 3
Resumo do conteúdo contido na página número 4
Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly. Every person involved with the installation, operation and maintenance of this device has to: -be
Resumo do conteúdo contido na página número 5
·Stepless frost, 0%~100% linear change frost ·Strobe/shutter: High speed shutter, 0-13 Hz or random strobe ·Control board with full color LCD graphic display and touch-keyboard ·Auto-program: 7 pre-built programs can be selected. ·Software-upload by optional accessory via DMX line Overview 1) Lens 2) Display 3) DC Switch 4) Microphone 5) Left-button 6) Down-button 7) Right-button 8) Mode/Esc-button 9) Up-button 10)ENTER-button 11)Handle 12)Lamp bracketrear metal panel 13)3-Pin DMX in 14)3-Pin
Resumo do conteúdo contido na página número 6
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. If the device has been exposed to temperature changes due to environmental changes,
Resumo do conteúdo contido na página número 7
GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc., the device was designed for indoor use only. This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure that the device will serve you for a long time without defects. Do not shake the
Resumo do conteúdo contido na página número 8
Before replacing the lamp let the lamp cool down, because during operation, the lamp can reach very high temperature. During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use a cloth to handle the lamps during insertion and removal. Do not install lamps with a higher wattage. They generate higher temperatures than which the device was designed for. For the installation, you need one: PLATINUM 5R Procedures: 1) Unscrew the 2 screws (A, B) on the bottom of th
Resumo do conteúdo contido na página número 9
weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety rope. Never stand directly below the device when mounting, removing or servicing the fixture. The operator has to make sure the safety relating and machine technical installations are approved by an expert before taking the device into operation for the first time. These installations have to be approved by a skilled person once a year. Over
Resumo do conteúdo contido na página número 10
Installation via the Omega holders a) Fixed the clamp on the bracket by tighten up the M12 screw on the bracket to the Ф13 hole in the middle of the bracket. b) Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the device. Tighten the quick-lock fasteners fully clockwise. c) Install the second Omega holder. d) Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a safe fixation spot. Insert the end
Resumo do conteúdo contido na página número 11
Address 1 Address 14 Address27 DMX-512 connection with DMX terminator For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,which is then plugged into the
Resumo do conteúdo contido na página número 12
to 1, the second unit to 14(13 + 1), the third to 27 (13 + 14), and so on. Control Board The Control Board offers several features: you can simply set the starting address , run the pre-programmed program or make a reset. The main menu is accessed by pressing the -button until the display starts flashing. Browse through the menu by pressing the -button , -button , -button or -button. Press the Enter-button in order to select the desired menu. You can change the selection by pressing the
Resumo do conteúdo contido na página número 13
Temperature Info H H H H He e e e ea a a a ad d d d d T T T T Te e e e em m m m mpe pe pe pe pera ra ra ra rat t t t ture ure ure ure ure XXX XXX℃ ℃/ /℉℉ Temperature in the head Software Version V V V V V V Ve e e e e e er1.0…… r1.0…… r1.0…… r1.0…… r1.0…… r1.0…… r1.0…… Software version of each IC L L La a am m mp O p O p On or O n or O n or Of f ff f f ON ON ON ON ON/ / / / /OFF OFF OFF OFF OFF Lamp on/off La A A Aut ut utom om oma a at t ti i ic c c L L La a a-O -O -On n n ON ON ON ON ON/ / / /
Resumo do conteúdo contido na página número 14
rs Mo de E Edi dit t U Us se er M r Mode ode M M M M M Ma a a a a ax Cha x Cha x Cha x Cha x Cha x Channe nne nne nne nne nnel l l l l l = X = X = X = X = X = XX X X X X X Preset User modes Set P P P P P PA A A A A AN N N N N N = CH = CH = CH = CH = CH = CH01 01 01 01 01 01 : : : : : : S Se el le ec ct t P Progra rogram ms s A A A A A Aut ut ut ut ut uto P o P o P o P o P o Pro P ro P ro P ro P ro P ro Pa a a a a art rt rt rt rt rt 1 = 1 = 1 = 1 = 1 = 1 = P P P P P Progra rogra rogra rogr
Resumo do conteúdo contido na página número 15
mode. Each slave setting will have a different function for a dynamic lightshow without a controller. Auto Program This function allows the internal programs to run in either stand-alone or master/ salve mode. In “Master” mode the fixture will send DMX data to other fixtures connect via the DMX chain. In “Alone” mode the fixture will operate as a single fixture. The program for this mode is selected in the “Select program” section of the control menu. You can set the number of steps under
Resumo do conteúdo contido na página número 16
counter should be reset after every lamp change. Lamp Off Time This function displays the running time of the lamp from the last power on. The display shows “XXXX”, where “XXXX” represents the number of hours the lamp has been running since it was last struck. This counter is automatically reset after every power-on. Timer Password Use this function to enter the “Clear Last Run” password. Password is “038” Clear Last Run This function will allow the “Last Run Hours” function be cleare
Resumo do conteúdo contido na página número 17
Lamp Control: Lamp On or Off This function allows manual control of the lamp power via the on-board system menu. • Select “ON” if you wish to strike the lamp or “OFF” to switch it off. • Press “ENTER” to confirm. • Press the Mode/Esc-button to return to the main menu. Automatic La-On When in the “ON” position, this function will automatically turn the lamp on when power is applied to the fixture Lamp On Via DMX When engaged, this function will allow the lamp to be switched “on” via a DMX
Resumo do conteúdo contido na página número 18
Personality: Status setting Address via DMX - This function allows the DMX address to remotely be adjusted from a DMX console. This setting requires special settings for both the controller and the fixture. RDMX is on by default. For operational instructions please see Section 10/Page 35 of this manual “Remote DMX addressing.” No DMX Status – This function dictates how the fixture will function if it looses DMX signal during normal operation. The default function is set to hold, in
Resumo do conteúdo contido na página número 19
includes original Design Spot 250s. There are 3 different mode variations; Speed 1 (Default): Slower than the original Design Spot 250 for smoother, more precise movements. Speed 2: Pan and Tilt speeds are identical to the first generation Design Spot 250. Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than original DS-250. Tilt speed will be the same as speed 2. Mic Sensitivity – This function makes the internal microphone more or less sensitive to sound.
Resumo do conteúdo contido na página número 20
function is disabled as default. Key Lock – This function allows you to lock the keys on the display to prevent menu tampering. With this function you can activate the automatic keylock function. If this function is activated, the keys will be automatically locked in 15 seconds from the last command. In order to deactivate or temporarily deactivate the keylock function, press the Mode/Esc Button for 3 seconds to regain access to the menu commands. Temperature C/F – This functio
