Manual do usuário Honeywell W8600F

Resumo do conteúdo contido na página número 1

69-1200-2.fm Page 1 Tuesday, December 3, 2002 11:21 AM
W8600F Air Cleaner Monitor
INSTALLATION INSTRUCTIONS
APPLICATION
LCD
The W8600F Air Cleaner Monitor is an option available
ON
BATTERY
for use with the F50F and F52F Honeywell Electronic Air
SERVICE
Cleaners (EAC). The series two F50F and F52F require
FAULT
a solid state power supply that is compatible with the
FUNCTION
Air Cleaner Monitor
INDICATOR
W8600F driver board. Any series one F50E, F or F52F
PANEL
can be upgraded to use the W8600F

Resumo do conteúdo contido na página número 2

On Battery Service Fault Air Cleaner Monitor 69-1200-2.fm Page 2 Tuesday, December 3, 2002 11:21 AM W8600F AIR CLEANER MONITOR EAC W8600F W8600F EAC RETURN AIR DUCT CEMENT BLOCK WALL EAC W8600F W8600F EAC W8600F EAC CLOSET GARAGE/DRYWALL M11966 F52-ATTIC Fig. 2. W8600F mounting locations. Mounting MOUNTING The following mounting instructions assume that the THERMOSTAT TEMPLATE WALLPLATE W8600F is mounted next to a T8600 Thermostat. If installing the monitor at another location, modify the pr

Resumo do conteúdo contido na página número 3

ELECTRONIC AIR CLEANER SYSTEM 69-1200-2.fm Page 3 Tuesday, December 3, 2002 11:21 AM W8600F AIR CLEANER MONITOR 3. Check that the battery is correctly installed in the Select Wash Frequency W8600F battery holder. Use the W8600F DIP switches to program the time 4. Snap the W8600F onto the base. between SERVICE indications. Be sure to select the 5. Turn off the power for the EAC. setting according to the conditions of the home. Factors to consider include the duty cycle of the EAC, the number of p

Resumo do conteúdo contido na página número 4

69-1200-2.fm Page 4 Tuesday, December 3, 2002 11:21 AM W8600F AIR CLEANER MONITOR 12. Connect the three wires from the W8600F to the 3. Connect terminal 3 to terminal 4 and the function EAC terminals 1, 3 and 4. panel indicates ON. FAULT will turn off. 4. Disconnect terminal 3 from terminal 4. The NOTE: Connect terminal 1 to 1, 3 to 3 and 4 to 4. W8600F is functional. 13. Turn on the EAC power. Checkout (Without EAC) 14. Turn on the system fan. 15. Push the W8600F reset button. All four indicato