Resumo do conteúdo contido na página número 1
®
ELECTRIC COOKTOP
f
PARRILLA COCINAR LECTRICA
Models, Modelos: 790.4281_, 790.4282_
.,.-'--- Color number, nL_mero de color
www.sears.com Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. P/N 318200648 Rev. A (0704)
Resumo do conteúdo contido na página número 2
Operating the Bridge Surface Element .......................... 12 Table of Contents Warm & Hold Feature .................................................... 12 Warranty ........................................................................... 2 Sabbath Feature Mode .................................................. 13 iMPORTANT SAFETY iNSTRUCTiONS ......................... 3-4 Locking the Controls ..................................................... 13 Serial Plate Location .................
Resumo do conteúdo contido na página número 3
important Safety instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains importantsafety symbols and instructions.Please pay attention to these symbols and follow all instructions given. This symbo! Wi!l he!p alert Youto situati0ns that may cause serious bodily harml death or property damage This Symbol Will help alert you to Situations that may cause bodily injury Oi property damagel • Remove all tape and packaging befor
Resumo do conteúdo contido na página número 4
important Safety instructions expose a portion of the surface heating unit to direct • Do Not Use Decorative Surface Element Covers. if an contact and may result in ignition of clothing. Proper element is accidentally turned on, the decorative cover relationship of utensil to the surface unit will also improve will become hot and possibly melt. Burns will occur if the efficiency. hot covers are touched. Damage may also be done to the appliance. • Utensil Handles Should Be Turned inward from Edge
Resumo do conteúdo contido na página número 5
Cooktop Features READTHESE iNSTRUCTiONS CAREFULLY BEFORE USING THE COOKTOP glass The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The surface may be HOT form residual heat transferred from the cookware and burns may occur. 1. Left Rear Single Radiant Element 2. Left Front Bridge Radiant Element 3. Right Rear Single Radiant Element 4. Right Front Double radiant Element 5. Center Rear Single Radiant Element (Fig. 2 only) 6. Right Rear Element Control Pad
Resumo do conteúdo contido na página número 6
CORRECT iNCORRECT Surface Cooking W Use Proper Cookware Cookware should have /,_ flat bottoms that make Curved and warped pan bottoms. t t good contact with the Flat bottom and straight entire surface heating sides. element. Check for ÷1 I_ flatness by rotating a • Tight fitting lids. ruler across the bottom Pan overhangs unit by more than Weight of handle does not tilt one-half inch. of the cookware (See pan. Pan is well balanced. Figure 1). Be sure to Pan sizes match the amount follow the Figu
Resumo do conteúdo contido na página número 7
Setting Surface Controls General Cooktop information About the Ceramic Glass Cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop. Heat is transferred up through the surface of the cooktop to the cookware. Only fiat-bottom cookware should be used. The type and size of cookwar
Resumo do conteúdo contido na página número 8
Setting Surface Controls (cont'd) Using the Touch Control The recommended way to use the touch pads on the cooktop is shown JnFigure t. Be sure that your finger is placed in the center of the touch pad as shown. If the finger is not placed on the center of a pad, the cooktop may not respond to the selection made. Lightly contact the pad with the flat part of your entire fingertip. Do not just use the Fig. 1 narrow end of your fingertip. LED Messages or Light Indicators Displayed by Main Control
Resumo do conteúdo contido na página número 9
Setting Surface Controls (cont'd) The Electronic Surface Element Control (ESEC) The Electronic Surface Element Control (ESEC) feature provides a digital display of the radiant surface elements on the cooktop. The ESEC display in Figure 1 Figure 2 combination with the touch pads is designed to replace conventional control knobs. The available ESEC Window Display Settings The ESEC control will display heat levels ranging from Hi (Figure 1) to Lo (Figure 6) and OFF (Figure 7). The settings between
Resumo do conteúdo contido na página número 10
Setting Surface Controls (cont'd) Operating Single Radiant Surface Elements The 30" cooktop has 2 SINGLE radiant surface elements: the RIGHT REAR and the LEFT REAR positions (Figure 1); The 36" cooktop has 3 SINGLE radiant surface elements: the RIGHT REAR, the CENTER REAR and the LEFT REAR positions (Figure 2). To Operate the Single Radiant Surface Elements: 1. Place correctly sized cookware on the radiant surface element. 2. Touch and hold the P_W_ key pad until a beep sounds. The power indicat
Resumo do conteúdo contido na página número 11
Setting Surface Controls (cont'd) Operating the DUAL Surface Element The cooktops are equipped with a DUAL radiant surface element located at the right front cooktop position (Figures t & 2). indicator lights on the control panel at that position are used to indicate what portions of the dual radiant element will heat. The INNER light indicates that only the inner element will heat. The OUTER light indicates that both inner and outer Figure 2 Figure 1 elements will heat together. You may switch
Resumo do conteúdo contido na página número 12
Setting Surface Controls (cont'd) Operating the Bridge Surface Element The cooktop is equipped with a"BRI DGE" surface eJement locatedat the leftcooktop position (See Figures I & 2). Indicatorlights on the cooktop are used to indicatewhat portions of the Bridge eJementwill heat. The Bridge element begins with the leftFRONT position only (Figures 3 & 4) and Figure 1 Figure 2 when selected with the +BRIDGE element (Figures 5 & 6) it will provide a combination of 2 heating surfaces. When set for AL
Resumo do conteúdo contido na página número 13
Setting Surface Controls (cont'd) Sabbath Feature Mode When the Sabbath feature is ON, all electronic surface element control displays show "Sb" (Fig. t). The surface elements can be used even if the Sabbath Feature is on. To activate the Sabbath Feature Mode: _ Fig. t in order to enter Sabbath at least one radiant burner has to be active. The user has to activate the Timer (timer slew) pad and the _ (lock) pad at the same time for a few seconds. Timer and element displays will show up "Sb'. To
Resumo do conteúdo contido na página número 14
General Care & Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE DIFFICULTY AND EXTENT OF A MAJOR CLEANING LATER. Surfaces How to Clean Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth. Painted and Plastic For general cleaning, use hot soapy water and a cloth
Resumo do conteúdo contido na página número 15
General Care & Cleaning Cleaning Recommendations for the Ceramic Glass Cooktop Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL. DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic glass surface. For light to moderate soil: Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non-abrasive plastic type no-scratch pad to clean the entire
Resumo do conteúdo contido na página número 16
Before You Call OCCURRENCE POSSIBLE CAUSE/SOLUTION Entire cooktop does not House fuse has blown or circuit breaker has tripped. Check/reset breaker or replace fuse. operate. If the problem is a circuit overload, have this situation corrected by a qualified electrician. Wiring connection is not complete. Call 1-800-4-MY-HOME® for service (see back cover). Power outage. Check house lights to be sure. Call your local electric company for service. Surface element does not No power to the appliance.
Resumo do conteúdo contido na página número 17
Master Protection Agreements Acuerdos maestros de protecci6n Enhorabuena por haber heeho una compra inteligente. Su nuevo Congratulations on making a smart purchase. Your new producto Kenmore®est_t disefiado y fabricado para brindarle aSos de Kenmore ® product is designed and manufactured for years of funcionamiento fiable. Pero, como cualquier producto, puede necesitar dependable operation. But like all products, it may require mantenimiento preventivo o reparaciones peri6dicas. Es por eso que
Resumo do conteúdo contido na página número 18
Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca For expert home
