Resumo do conteúdo contido na página número 1
user manual
Induction hob
AU EHD 60150 I
Resumo do conteúdo contido na página número 2
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety instructions.................................. 3 Disposal ................................................ 19 Description of the Appliance .................. 4 Installation Instructions .......................... 20 Operating the appliance......................... 6 Assembly .............................................. 22 Tips on Cooking and Frying ................... 14 Rating plate....
Resumo do conteúdo contido na página número 3
electrolux 3 1 Safety instructions Please comply with these instructions. If you � In the event of faults with the appliance do not, any damage resulting is not covered or damage to the glass ceramic (cracks, by the warranty. scratches or splits), the appliance must be switched off and disconnected from Correct use the electrical supply, to prevent the pos- • This appliance is not intended for use by sibility of an electric shock. persons (including children) with re- � Repairs to the appl
Resumo do conteúdo contido na página número 4
4 electrolux � Objects that melt and things that boil � To avoid damaging cookware and glass over can burn onto the glass ceramic ceramics, do not allow saucepans or and should be removed straightaway. frying pans to boil dry. � Do not use the cooking zones with emp- � The ventilation gap of 5mm between the ty cookware or without cookware. worktop and front of the unit underneath it must not be covered. Description of the Appliance Cooking surface layout Induction cooking zone 1800 W Ind
Resumo do conteúdo contido na página número 5
electrolux 5 Touch Control sensor fields The appliance is operated using Touch Con- trol sensor fields. Functions are controlled by touching sensor fields and confirmed by dis- plays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off To switch the appliance on and off Lock Locking/unlocking the control panel Stop+Go To switch the Keep Warm setting on/off Cooking zone Off To switch off the cooking zone 1- 9 / Heat
Resumo do conteúdo contido na página número 6
6 electrolux Residual heat indicator 1 Warning: Risk of burns from residual heat. After being switched off, the cook- ing zones take some time to cool down. Look at the residual heat indicator . Control bar The heat setting and the power function are set via the control bar. The heat setting indi- cator consists of a chain of light elements. Operational readiness indicator for cooking zone Heat setting indicator Power function indicator Power function Cooking zone Off Heat setting selection
Resumo do conteúdo contido na página número 7
electrolux 7 Do not release before the desired heat set- Setting the heat setting ting is reached. The control bar is touched where the desired heat setting is positioned. The heat setting is shown in the display. Correct to the left or the right, if necessary. Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control p
Resumo do conteúdo contido na página número 8
8 electrolux Using the automatic warm-up function All cooking zones are equipped with an au- tomatic warm-up function. When setting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat set- ting set. Step Control panel Display 1. Select warm-up setting display flashes 2. Select the desired heat setting The desired heat setting is displayed. between 1 and 8 display lights
Resumo do conteúdo contido na página número 9
electrolux 9 Using the child safety device The child safety device prevents unintention- al use of the appliance. Switching on the child safety device Step Control panel Pilot light 1. Switch on appliance. (Do not set a heat lights up. The operational readi- setting.) ness indicators of the individual cooking zones light up. 2. Touch for 4 seconds over lights up The child safety device is switched on Switching off the child safety device Step Control panel Pilot light 1. Switch on appliance
Resumo do conteúdo contido na página número 10
10 electrolux Switching the power function on and off The power function makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly. The power function is activated for 10 min- utes at most. After that the induction cooking zone automatically switches back to heat setting 9. Control panel Display To switch on Touch The light elements in the control bar light up. The display flashes To switch off Select the heat setting The hea
Resumo do conteúdo contido na página número 11
electrolux 11 Using the timer Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes 3 If just one countdown value is set you can change it only when the appliance is switched on. 3 If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. 3 If
Resumo do conteúdo contido na página número 12
12 electrolux Setting the time Step Control panel Indicator 1. Select cooking zone Pilot light for the cooking zone selected flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select cooking zone Pilot light of cooking zone selected flashes faster Time remaining is displayed 2. Touch The time remaining counts backwards to 00. The pilot light
Resumo do conteúdo contido na página número 13
electrolux 13 Induction cooking zones Automatic switch off � In the case of overheating (e.g. when a Cooking surface saucepan boils dry) the cooking zone � If after switching on the cooking surface, automatically switches itself off. is a heat setting is not set for a cooking displayed. Before being used again, the zone within approx. 10 seconds, the cooking zone must be set to 0 and cooking surface automatically switches cooled down. itself off. � If cookware that is not suitable is
Resumo do conteúdo contido na página número 14
14 electrolux Tips on Cooking and Frying 3 Information on acrylamides According to the latest scientific knowl- edge, intensive browning of food, espe- cially in products containing starch, can constitute a health risk due to acryla- mides. Therefore we recommend cook- ing at the lowest possible temperatures and not browning foods too much. Cookware for induction cooking zones Cookware material Cookware material suitable Cast iron + Steel, enamelled steel + Stainless steel +* Multi-layer pan
Resumo do conteúdo contido na página número 15
electrolux 15 Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking- Cooking set- suitable for Tips/Hints process time ting 0 Off position Keeping 1 Keeping cooked foods warm as required Cover food warm Hollandaise sauce, Melting melting butter, chocolate, gela- 5-25 mins. Stir occasionally 1-2 tine Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on Simmering rice and milk-based Add at least twice as much Simmerin
Resumo do conteúdo contido na página número 16
16 electrolux Cleaning and Care 1 Take care! Risk of burns from residual heat. 1 Warning! Sharp objects and abrasive cleaning agents can damage the appli- ance by scratching the glass surface, which may result in shattering of glass. Clean the appliance and remove the residues with water and washing up liq- uid after each use. Remove also rem- nants of cleaning agents! Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the
Resumo do conteúdo contido na página número 17
electrolux 17 What to do if… Problem Possible cause Remedy The appliance cannot be switched More than 10 seconds have Switch the appliance on again. on or is not operating passed since the appliance was switched on The lock is switched on Switch off the lock (See the sec- tion “Locking/unlocking the con- trol panel”) The child safety device is switched Deactivate child safety device (See on the section “Child safety device”) Several sensor fields were Only touch one sensor field touched at th
Resumo do conteúdo contido na página número 18
18 electrolux Problem Possible cause Remedy and number are displayed Electronics fault Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house’s wiring system) If after switching on again, is displayed again, call the customer service department If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. 1 Warning! Repairs to the appliance are only to be carried out by qualif
Resumo do conteúdo contido na página número 19
electrolux 19 2 1 3 Disposal 2 Packaging material The packaging materials are environ- mentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the com- munity waste disposal facilities. 2 Old appliance The symbol W on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the app
Resumo do conteúdo contido na página número 20
20 electrolux Installation Instructions � CAUTION: The surface temperature ex- 1 Safety instructions ceeds 95°C. To avoid a hazard, under- Warning! This must be read! bench access must be restricted. The laws, ordinances, directives and stand- � Supply cords must have a temperature ards in force in the country of use are to be rating not less than 105°C. followed (safety regulations, proper recycling in accordance with the regulations, etc.) Electrical Connection Installation may only be car
