Manual do usuário Speco Technologies VMS-2

Resumo do conteúdo contido na página número 1

VMS-2
4” Color LCD Service Monitor Kits
User’s Manual

Resumo do conteúdo contido na página número 2

Copyright @1998 by this company. No Part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or any means. Electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. I. Security notes The unit is only suitable for indoor use. The heat being generated in the unit has to be removed via air circulation. Therefor

Resumo do conteúdo contido na página número 3

I. CONTENTS : 1. 4” LCD monitor 2. Carry Bag and Belts 3. 1000mA Rechargeable Ni-H Battery 4. Three velcos , two for monitor and one for battery. 5. 30 cm power cord. 6. 15V DC Charger. This Charger should only be used to charge the battery NOT to supply the unit. If used on the unit Serious damage may occur which will not be covered by the warranty. 7. RCA to BNC adapter 4 pcs. 8. Spacer Protector II . Power Operating and Connections 1. Please charge the Ni-H Battery for o

Resumo do conteúdo contido na página número 4

III. LCD Monitor Operation and Connections : Controls and Connectors on LCD monitor: 1. Brightness control 2. Contrast Control 3. Volume control for headphones 4. Audio output for headphones 5. Main Power switch 6. Video Left-Right Reverse Switch 7. Audio input 8. Video output 9. Video 1Input 10. Video 2 Input 11. Video Input 1or 2 Switch 12. 12V DC Power Input 1) Switch on the monitor using the Main Power swi

Resumo do conteúdo contido na página número 5

iii.. Connections 1) Connect the video source to the Video input 1(9) or Video 2(10) Inputs. 2) Select the correct Video input using the Video Input switch (11). 3) Connect the Audio source to the audio input (7). 4) Connect an electronically regulated 12V power supply The positive pole must be connected to the center contact. 5) Connect headphones to the Audio Output if required. i Operation 1) Switch on the monitor using the Main Power switch (5). 2) Adjust the brightness control (1

Resumo do conteúdo contido na página número 6

vi. Technical Data LCD technology: TFT active matrix Display size: 4” Active area : 82.1 x 61.8 mm Color system: NTSC or PAL Sync. :.Horizontal :15, 625 Hz, Vertical : 50 Hz. Resolution: 480 x 234 , 112,320 Pixels Audio level: 1V/10k Video Input : 1Vpp 75 £[ Dimensions ( Bag ) :190.0 (W) x 130.0 (H) x 60 (D) mm Weight : 1.2 Kg CAUTION: When using headphones do not adjust the vol- ume to a high position. Start at the lowest setting and gradually raise it so it can be heard. The human ear