Resumo do conteúdo contido na página número 1
Multimedia Plasma Monitor
MODEL
PDP-32H1ENV
PDP-32H1AN
PDP-32H1EN
Owner's Manual
Resumo do conteúdo contido na página número 2
TO THE OWNER Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. This Plasma Monitor provides many convenient features and functions. Operating the Plasma Monitor properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your Plasma Monitor seems to operate impr
Resumo do conteúdo contido na página número 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This Plasma Monitor should be operated only from the type the product is operated. of power source indicated on the marking label. If you are not Read all of the instructions given here and retain them for later sure of the type of power supplied, consult your authorized use. Unplug this from AC power supply Plasma Monitor dealer or local power company. before cleaning. Do not use liquid or aerosol cleaners.
Resumo do conteúdo contido na página número 4
COMPLIANCES European Norm Compatibility / CE This machine is provided with the CE-mark and therewith corresponding to the norms that are valid for its operation at present. Thus the effective guidelines on the electromagnetic compatibility 89/336/EWG and safety regulations according to low voltage guideline 73/23/EWG and 93/68/EWG are guaranteed. Mutual disturbances with other electronic appli- ances are normally excluded, if those also are in accordance with valid norms. Sporadically disturbanc
Resumo do conteúdo contido na página número 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER MODE 28 SELECTING INPUT SOURCE 28 SELECTING COMPUTER SYSTEM 28 PC ADJUSTMENT 29 PREPARATION 7 NAME OF EACH PART OF PLASMA MONITOR 7 SETTING-UP PLASMA MONITOR 9 VIDEO MODE 32 SELECTING INPUT SOURCE 32 SELECTING VIDEO SYSTEM 33 CONNECTING PLASMA MONITOR 11 TERMINALS OF PLASMA MONITOR 11 CONNECTING TO VIDEO EQUIPMENT 13 SETTING 34 CONNECTING TO COMPONENT VIDEO EQUIPMENT 14 CONNECTING TO COMPUTER 15 SCREEN SAVER FUNCTION 34 SETTING MENU 35 CLEANING TH
Resumo do conteúdo contido na página número 6
FEATURES AND DESIGN This Plasma Monitor is designed with the most advanced technology. The Plasma Monitor utilizes built-in multimedia features, a palette of 16.77 million colors, and Plasma Display Panel technology. High Definition Plasma Panel Input Terminals This Plasma Monitor has 852 x 1,024 dots High D-SUB, RGB input for PC (Up to XGA) Definition Plasma Display Panel. This Plasma Display Component input for DVD Panel has High brightness and wide viewing angle. S-Video / Video
Resumo do conteúdo contido na página número 7
PREPARATION NAME OF EACH PART OF PLASMA MONITOR FRONT PLASMA DISPLAY PANEL FRONT CONTROLS AND INDICATORS MENU BUTTON CURSOR BUTTON FRONT CONTROLS Used to set and adjust the Used to select MENU menu data on On-Screen operation. (P18) Menu. (P18) OK BUTTON Used to execute the CURSOR BUTTON selected menu on On- Used to select the menu on Screen Menu. (P18) On-Screen Menu. (P18) OK MENU INPUT VOLUME VOLUME BUTTONS MAIN ON/OFF SWITCH Used to adjust volume. Used to turn Plasma (P27) Monitor on or
Resumo do conteúdo contido na página número 8
PREPARATION NAME OF EACH PART OF PLASMA MONITOR BACK This Plasma Monitor detects COOLING FANS internal temperature and automatically controls operating power of Cooling Fans. TERMINALS AND CONNECTORS (SIDE) (Refer to page 11) SPEAKER OUTPUT TERMINALS (LEFT) TERMINALS SPEAKER OUTPUT AND CONNECTORS TERMINALS (BACK) (RIGHT) (Refer to page 12) POWER CORD CONNECTOR NOTES ON USING PLASMA MONITOR For using this Plasma Monitor, Optional Stand or Mounting Bracket is needed. Those optional units are not i
Resumo do conteúdo contido na página número 9
PREPARATION SETTING-UP PLASMA MONITOR CONNECTING AC POWER CORD This Plasma Monitor uses nominal input voltages of 100- 120 V or 200-240 V AC. The Plasma Monitor automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being i
Resumo do conteúdo contido na página número 10
PREPARATION INSTALLATION OF OPTIONAL SPEAKERS AND STAND Please read the each option's instruction manual (or installation manual) for the installation. CAUTION IN INSTALLATION Through installation work, handling with more than two people is recommended. When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the attached accessory parts (the Speakers), otherwise damage could be result. Provide space that enough larger than the screen size. T
Resumo do conteúdo contido na página número 11
CONNECTING PLASMA MONITOR TERMINALS OF PLASMA MONITOR This Plasma Monitor has INPUT TERMINALS and OUTPUT TERMINALS on its side and back, for connecting computers and video equipment. Refer to the figure on pages 13 to 15 and connect properly. SIDE RS-232C TERMINAL When controlling this Plasma RS-232C Monitor by computer, connect your computer to this terminal. WIRED R/C JACK WIRED R/C When using Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to this jack with Remote Co
Resumo do conteúdo contido na página número 12
CONNECTING PLASMA MONITOR BACK VIDEO1 INPUT JACKS Connect video and audio outputs from PC INPUT TERMINALS video equipment. (Refer to P13.) Connect computer outputs to this terminals. (Refer to P15.) S-VIDEO (Mini DIN 4-type) ✽✽ VIDEO (RCA-type) SEE NOTE BELOW RGB (D-SUB) AUDIO R and L(MONO) (RCA-type) AUDIO R/L (Stereo Mini Jack) PC IN VIDEO1 IN D-SUB AUDIO(R/L) S-VIDEO VIDEO R-AUDIO-L(MONO) VD HD R B G R-AUDIO-L S-VIDEO VIDEO R-AUDIO-L VIDEO R-AUDIO-L Pr /Cr Pb /Cb Y VIDEO2 IN MONITO
Resumo do conteúdo contido na página número 13
CONNECTING PLASMA MONITOR CONNECTING TO VIDEO EQUIPMENT NOTE : Models PDP-32H1ENV and PDP-32H1AN only. Cables used for connection ( Cables are not supplied with this Plasma Monitor.) • 21-PIN Video Cable (BNC x 4) NOTE : • Video Cable (RCA x 1) When connecting Plasma Monitor, AC Power • Video Cable (RCA x 3) Cords of both Plasma Monitor and external • S-VIDEO Cable equipment should be disconnected from AC outlet. • Audio Cable (RCA x 2) Video Source (example) Video Cassette Recorder Video Disc
Resumo do conteúdo contido na página número 14
CONNECTING PLASMA MONITOR CONNECTING TO COMPONENT VIDEO EQUIPMENT NOTE : Models PDP-32H1ENV and PDP-32H1AN only. Cables used for connection (Cables are not supplied with this Plasma Monitor.) • Video Cable (RCA x 3) or (BNC x 3) NOTE : • Audio Cable (RCA x 2) When connecting Plasma Monitor, AC Power Cords of both Plasma Monitor and external equipment should be disconnected from AC outlet. Component video output equipment. Component Video DVD player (such as DVD player or Source (example) high
Resumo do conteúdo contido na página número 15
CONNECTING PLASMA MONITOR CONNECTING TO COMPUTER Cables used for connection • VGA Cable (HDB 15 pin) NOTE : • Video Cable (BNC x 5) ✽ When connecting the cable, AC Power Cords of • MAC Adapter (in the case of connecting Macintosh computer) ✽ both Plasma Monitor and external equipment • Audio Cables (RCA x 2) or ( Mini Plug - Mini Plug (R/L)) ✽ should be disconnected from AC outlet. Turn Plasma Monitor and peripheral equipment on ✽Those Cables and Adapter are not supplied with Plasma Monitor. b
Resumo do conteúdo contido na página número 16
MOVE DOWN WIDE BEFORE OPERATION OPERATION OF REMOTE CONTROL Remote Control Unit can be used as either Wired or Wireless. WIRED REMOTE JACK COMPONENT BUTTON When using as Wired Remote Used to select COMPONENT Control, connect Remote Control VIDEO input. (P22) Cable to this jack. (P17) POWER ON-OFF BUTTON Used to turn Plasma Monitor on VIDEO BUTTON or off. (P20) Used to select video inputs INPUT "AV 1" and "AV 2". (P22) VIDEO COMPONENT ON-OFF VOLUME BUTTONS Used to adjust volume. (P22) PC/RGB
Resumo do conteúdo contido na página número 17
BEFORE OPERATION WIRED REMOTE CONTROL OPERATION When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with Remote Control Cable (supplied). Batteries installation is required when using as Wired Remote Control Unit. Remote Control Cable (supplied) REMOTE CONTROL BATTERIES INSTALLATION Remove the battery Slide 2 batteries into Replace the compartment 1 2 3 compartment lid. the compartment. lid. OPEN OPEN Press the lid Slide the lid Two AA size batte
Resumo do conteúdo contido na página número 18
MOVE DOWN WIDE BEFORE OPERATION OPERATING ON-SCREEN MENU You can control and adjust this Plasma Monitor through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. BUTTONS OF ON-SCREEN MENU OPERATION OFF TIMER REMOTE CONTROL UNIT CURSOR OK PICTURE MOVE UP MUTE Used to execute Used to select the selected the item to adjust. menu. OK CURSOR STATUS MENU Used to set or MENU adjust the menu POWER data. Used to display ON ON-SCREEN MENU. STATUS Used to close ON
Resumo do conteúdo contido na página número 19
BEFORE OPERATION MENU LIST C Contrast ontrast 6 63 3 Contrast : Select : Adjust : Select : Adjust (P24) MENU : Return ST MENU : Return STA AT TUS : Exit US : Exit C Contrast ontrast Brightness Brightness 31 31 Brightness Brightness Brightness : Select : Adjust : Select : Adjust (P24) C Color olor M MENU : Return ST ENU : Return STA AT TUS : Exit US : Exit T Tiint
Resumo do conteúdo contido na página número 20
BASIC OPERATION TURNING ON / OFF PLASMA MONITOR Complete the peripheral connections (with Computer, VCR, etc.) 1 before turning on Plasma Monitor. (Refer to "CONNECTING PLASMA MONITOR" on Pages 13~15 for connecting that equipment.) Connect the Plasma Monitor's AC Power Cord into an AC outlet . 2 VOLUME Press MAIN ON/OFF switch on Front Control of Plasma Monitor 3 to turn ON. POWER indicator will light up(green) when Plasma Monitor is ON. Press MAIN ON/OFF switch again to turn OFF. MAIN ON/OFF
