Resumo do conteúdo contido na página número 1
Driver Installation Program Installation
SyncMaster 710V/910V/510M/710M/910M/712V
Resumo do conteúdo contido na página número 2
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Important to read and understand at all Prohibited times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock
Resumo do conteúdo contido na página número 3
Power When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Do not excessi
Resumo do conteúdo contido na página número 4
Do not drop the monitor when moving it. This may cause damage to the product or human body. Place the monitor on a flat and stable surface. The monitor can cause injury by falling. Set down the monitor carefully. It could be damaged or broken. Do not place the monitor face down. The CDT surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting
Resumo do conteúdo contido na página número 5
Do not spray water or detergent directly on the monitor. This may cause damage, electric shock or a fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector can cause an electric shock or fire. Contact a Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior ove
Resumo do conteúdo contido na página número 6
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. The monitor may malfunction, causing an electric shock or a fire. Then contact the Service Center . Keep the power off when there is thunder and lightening outside, or let the monitor remain unused for an extended period of time. The monitor may malfunction, causing an electric shock or a fire. Do not try to move the monitor by pulling on the wire or the signal cable. Th
Resumo do conteúdo contido na página número 7
Do not insert metal objects such as utensils, wire or drill bits, or things that catch fire easily, such as pieces of paper or matches, into the vents or the headphone or A/V ports on the monitor. This may cause malfunction, an electric shock or a fire. Always contact the Service Center if foreign substances/objects enter into the monitor. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy save or set
Resumo do conteúdo contido na página número 8
SyncMaster 710V/910V/712V Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual User's Guide, Monitor Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD
Resumo do conteúdo contido na página número 9
Cable D-Sub Cable Power Cord Front 1. Menu button [ ] Use this button to open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. MagicBright™ MagicBright™ is a new feature providing optimum viewing environment button [ ] depending on the contents of the image you are watching. Currently four different modes are available: Custom, Text, Internet, and Entertain. Each mode has its own pre-configured brightness value. You can easily
Resumo do conteúdo contido na página número 10
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. Rear (The configuration at the back of the monitor may vary from product to product.) 1. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 2. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector
Resumo do conteúdo contido na página número 11
SyncMaster 510M/710M/910M Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual User's Guide, Monitor Dirver, Natural Color Quick Setup Guide Warranty Card software, MagicTune™ software CD
Resumo do conteúdo contido na página número 12
Cable D-Sub Cable Power Cord Audio Cable Front 1. Menu button [ ] Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. 2. MagicBright™ MagicBright™ is a new feature providing optimum viewing environment button [ ] depending on the contents of the image you are watching. Currently four different modes are available: Custom, Text, Internet, and Entertain. Each mode has its own pre-configured brightness value. You c
Resumo do conteúdo contido na página número 13
If this is the case, adjust the Brightness and Contrast by using the OSD menu. 3. Power button [ ] / Use this button for turn the monitor on and off./ Power indicator This light glows green during normal operation, and blinks green once as the monitor saves your adjustments. 4. Volume button [ ] When OSD is not on the screen, push the button to adjust volume. 2,4. Adjust buttons [ ] Use this button for navigate and select menus or adjust the menu items in the menu screen. 5. Enter button
Resumo do conteúdo contido na página número 14
1. Headphone connection terminal [ ] 2. PC sound connection terminal Connect the audio cable for your monitor to the audio port on the back of your computer. See Connecting Your Monitor for further information regarding cable connections.
Resumo do conteúdo contido na página número 15
1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-SUB connection cable. 2-3. In the case of an old model Macintosh, you need to connect the monitor using a speci
Resumo do conteúdo contido na página número 16
Monitor Assembly 1. Monitor and Bottom 2. Monitor and Hanger Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove the four screws and then remove the Stand from the LCD monitor. 4. Align the Mounting Interface Pad
Resumo do conteúdo contido na página número 17
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions as appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web http://www.samsung-monitor.com/ (Worldwide) site : http://www.samsungusa.com/monitor (USA) http://www.sec.co.kr/monit
Resumo do conteúdo contido na página número 18
4. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/. 5. Monitor driver installation is completed. Windows XP | Windows 2000 | Windows Me | Windows NT | Linux When prompted by the operating system for the monitor driver,
Resumo do conteúdo contido na página número 19
3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".
Resumo do conteúdo contido na página número 20
7. Click the "Browse" button then choose A:(D: \Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samsung-monitor.com/ 9. Click the "Close" button the
