Resumo do conteúdo contido na página número 1
PE1500
LCD Monitor
USER’S GUIDE
www.planar.com
Resumo do conteúdo contido na página número 2
Contents Introduction ......................................................................................................1 Features ...................................................................................................................................1 For Your Safety .......................................................................................................................1 Installation...............................................................................
Resumo do conteúdo contido na página número 3
PE1500 User’s Manual Introduction This latest LCD monitor has a 15-inch active matrix TFT (thin film transistor) liquid crystal ® display module. It is designed for use with any Windows -based PC (adapter may be required for the Macintosh). The monitor’s compact-sized design provides great space savings on your desk. Features Important features include: Automatic configuration to the PC video settings with maximum XGA resolution. Three control buttons plus OSD (on-screen display) for
Resumo do conteúdo contido na página número 4
PE1500 User’s Manual Do not cover the air vents. To avoid the risk of damage to the display and electrical shock to yourself, do not expose the display to rain or moisture. If any of the following conditions occur, unplug the display and contact qualified service personnel: The power cord or plug is frayed or damaged. You have spilled liquid into the display. The display has been exposed to rain or water. The display does not operate correctly when the operating instructions are
Resumo do conteúdo contido na página número 5
PE1500 User’s Manual Installation Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your display, first read through the instructions in this chapter and the safety precautions in the previous chapter. Unpacking the Display When you are unpacking the display, make sure that you have the following items: The LCD monitor AC power adapter with attached power cable A power cord Analog video signal cable The User's Manual Note: Plac
Resumo do conteúdo contido na página número 6
PE1500 User’s Manual Button Function Description (1) Turn on OSD menu while it is off. Select (2) Execute the function selected in the OSD menu. (3) Hold down for 2 sec will clear OSD menu. (1) Item selection move upward or user-adjustable value Up (△) increasing. (in Main Menu). (2) Brightness (Direct-key function) (1) Item selection move downward, user-adjustable value Down (▽) decreasing (in Main Menu) (2) Auto Setup (Direct-key function). Making the Connections Before
Resumo do conteúdo contido na página número 7
PE1500 User’s Manual Using Your Display This chapter contains information about using your LCD Monitor. Turning the Display On and Off Use the power button located at the lower right side of the front panel of the display to turn the display on and off. When the display is on, the light (LED) near the Power button is illuminated. The light is green when both the display and PC are active and amber when the display is in a reduced power mode. If your PC supplies powe
Resumo do conteúdo contido na página número 8
PE1500 User’s Manual Tilting the Display The monitors have a tilt feature that allows you to tilt the display back and forth as well as left and right to find the most comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull it toward you, or turn it left or right until it is in the desired position. The display can be tilted 20 ° backward and 5 ° forward. Note: Do not tilt the display by grasping the top edge. Setting the Video
Resumo do conteúdo contido na página número 9
PE1500 User’s Manual Minimizing Power Consumption Many PCs support industry standard power-save signaling techniques. Power management features reduce the display’s power consumption after a period of keyboard inactivity. When the display is in a power-saving mode, the screen is blank and the power indicator is amber. Pressing a key on the keyboard or moving the mouse restores the image in several seconds. Consult your PC documentation for information about setting the power-saving modes
Resumo do conteúdo contido na página número 10
PE1500 User’s Manual Adjusting Your Display This chapter contains information about how to changing display settings for your LCD Monitor. It is designed with an OSD menu to help you easily adjust to its optimum performance. Note: You must perform auto setup before making any adjustment. Summary of Control Buttons There are three control buttons located at the lower part of the front panel of your display: Select: Display the On-Screen Display (OSD) “Main Menu” , selects items for use
Resumo do conteúdo contido na página número 11
PE1500 User’s Manual Item Description Doing the “Auto Setup” function. See “Doing Auto Setup” on page 10. Auto Setup Open the “Management” submenu where you can select Brightness, Management Contrast or the image position for further adjustment. See “Doing Adjustment in the “Management” Submenu on page 11. Open the “Clock/Phase” submenu where you can select Clock or Phase for Clock/Phase further adjustment. See “Doing Adjustment in the “Clock/Phase” Submenu” on page 13. Open the “Co
Resumo do conteúdo contido na página número 12
PE1500 User’s Manual Doing Adjustment in the OSD Menu Doing Auto Setup To doing the Auto Setup function you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2. The ‘Auto’ icon should be highlighted already. 3. Use ‘Select’ button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show-up the follow message: If the image looks correct, choose Yes. OR If the image requires further adjustment
Resumo do conteúdo contido na página número 13
PE1500 User’s Manual Doing adjustment in the “Management” Submenu To do adjustment in the “Management” submenu you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the management icon and highlight it. 3. Use ‘Select’ key to enter the “Management” Submenu. It will show up four items for your further adjustment. If ｀Brightness＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust t
Resumo do conteúdo contido na página número 14
PE1500 User’s Manual Contrast 100 50 50 50 EXIT Note: We recommend you do Auto Setup before adjusting the contrast setting. If ｀H. position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of the horizontal position of the image. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. H.Position 100 50 50 50 EXIT If ｀V. position＇ is selected, you may use ｀Up(△)＇ or ｀D
Resumo do conteúdo contido na página número 15
PE1500 User’s Manual If ‘Exit’ is selected, it will exit the “Management” submenu and back to the “Main Menu”. Exit 100 50 50 50 EXIT Doing adjustment in the “Clock/Phase” Submenu To do adjustment in the “Clock/Phase” submenu you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the clock/phase icon and highlight it. 3. Use ‘Select’ key to enter the “Clock/Phase” Submenu. It wil
Resumo do conteúdo contido na página número 16
PE1500 User’s Manual Note: We recommend you do Auto Setup first. And adjusting the clock setting only if the image looks incorrect. If ｀Phase＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of phase. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. Note: We recommend you do Auto Setup and to see whether the phase needs to adjust or not. If ‘Exit’ is selected, it will exit the “Cl
Resumo do conteúdo contido na página número 17
PE1500 User’s Manual 3. Use ‘Select’ button to enter the “Color” submenu. It will show up three items for your further adjustment. If ｀Color Temp＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to select one of the three settings. Press ｀Select＇ button will return you back to the “Color＂ submenu. Note: As you choose an item, your screen will immediately updates to reflect this setting. If ｀Black Level Adjust＇ is selected, it will bring-up “Back Lev
Resumo do conteúdo contido na página número 18
PE1500 User’s Manual If ‘RGB Adjust’ is selected, the same sequence as ‘RGB Adjust’ will be followed. If ‘Exit’ is selected, it will exit the “Color” submenu and back to the “Main Menu”. Doing Adjustment in the “OSD” submenu To adjust OSD H. and V. positions you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the OSD display icon and highlight it. 3. Use ‘Selec
Resumo do conteúdo contido na página número 19
PE1500 User’s Manual If ｀H. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of H. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are also changed accordingly. If ｀V. Position＇ is selected, you may use ｀Up(△)＇ or ｀Down(▽)＇ buttons to adjust the setting of V. position of the OSD display. The fullness of the graphic bar as well as the numerical value at the right corner are a
Resumo do conteúdo contido na página número 20
PE1500 User’s Manual 3. Use ‘Select’ button to activate the factory recall action. Selecting Language for Your Preference To select one of the five languages for your preference you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2. Use ｀Up(△)＇ (or ｀Down(▽)＇) to move forward (or backward) to the languages icon and highlight it. 3. Use ｀Select＇ button to enter the “Language＂ submenu. It will show up five items for your selection. Use ｀Up(△)＇ (
