Resumo do conteúdo contido na página número 1
Panasonic Broadcast
BT-LT900A
Menu Information
Resumo do conteúdo contido na página número 2
How to use the on-screen menus Four kinds of information—menus, status displays, image control settings and battery voltage—can be displayed on the screen. Menu display This display appears when the MENU/EXIT button is pressed. If no further action is taken for the next 120 [MAIN MENU] seconds, the display will be automatically cleared. 1 MARKER 4 The position where the display appears on the screen can VIDEO CONFIG 4 SYSTEM CONFIG 4 be changed using the m
Resumo do conteúdo contido na página número 3
How to use the on-screen menus Image control display The image control information is displayed when an image has been adjusted using the image controls. (Refer to page 6) It appears when a control has been pressed in so that it has popped out or when an adjustment is made by turning an already popped out control. [CONTRAST] 50 It is cleared when a control is pressed again and returned to its original position. It is also cleared when a popped out control is not touched for 10 seconds.
Resumo do conteúdo contido na página número 4
Menu operations Use the HD ZOOM/X button and BLUE/W button to Menu operations 4 change the setting, and press the FUNCTION/ENTER button to enter the change. When the MENU/EXIT button is pressed, the main 1 Alternatively, the change will be canceled when the menu appears on the screen. MENU/EXIT button is pressed instead. Displayed in green. [MARKER] 1 MARKER SELECT GPI MARKER 16:9 OFF MARKER 4:3 OFF MARKER BACK NORMAL CENTER MARKER OFF GPI PRESET1
Resumo do conteúdo contido na página número 5
User data This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required. The following data can be saved and loaded as user data files: ≥ All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER MODE LOAD/SAVE ≥ Screen values which have been adjusted by the image controls Saving the user data Loading the user data When
Resumo do conteúdo contido na página número 6
MAIN MENU Menu configuration MAIN MARKER SELECT MARKER MARKER 16:9 MARKER 4:3 GAMMA SELECT MARKER BACK VIDEO CONFIG FILM GAMMA CENTER MARKER COLOR TEMP. GPI PRESET1 SHARPNESS MODE GPI PRESET2 SHARPNESS H SHARPNESS V I-P MODE MONO SD ASPECT BACKLIGHT SYSTEM CONFIG FUNCTION WFM BATTERY REMAIN HD ZOOM OSD CONFIG STATUS DISPLAY PEAKING/PHASE CRCC MESSAGE USER MODE LOAD MENU POSITION USER MODE SAVE STATUS POSITION ROTARY POSITION GPI1 GPI GPI2
Resumo do conteúdo contido na página número 7
MAIN MENU Menu items MARKER Item Setting Description Item Setting Description MARKER SELECT MENU For setting whether the marker display GPI PRESET1 4:3 For setting the markers to be displayed if, GPI settings are to be performed using the 13:9 when MARKER1 ON/OFF has been menu or from the GPI connector. 14:9 allocated to any item and GPI has been MENU:The operations are performed using VISTA selected as the MARKER SELECT item the menu. Operations from the GPI CNSCO setting on the GPI screen, th
Resumo do conteúdo contido na página número 8
MAIN MENU Types of markers 16:9 markers (These appear when HD signals or when SD signals with a 16:9 aspect ratio are supplied.) Markers are displayed only in the form of vertical lines. The shaded areas indicate what is set by the MARKER 80% area markers BACK item. 4:3 markers (These appear when SD signals with a 4:3 aspect ratio are supplied.) Dotted lines are displayed as the markers. 4:3 markers 13:9 markers 95% area markers 93% area markers 14:9 markers VISTA markers and CNSCO markers Two r
Resumo do conteúdo contido na página número 9
MAIN MENU VIDEO CONFIG Item Setting Description Item Setting Description GAMMA SELECT GPI For setting the gamma mode. SHARPNESS H 0 For setting the image sharpness in the : NORMAL GPI: This is the GPI setting. For horizontal direction. 2 FILM details, refer to “REMOTE : This item enables two settings, one for the specifications” (page 22). VIDEO input signals and one for other 30 NORMAL:The normal gamma mode is signals, to be stored in the memory. established. FILM: The film mode that s
Resumo do conteúdo contido na página número 10
MAIN MENU SYSTEM CONFIG OSD CONFIG Item Setting Description Item Setting Description BACKLIGHT 0 For adjusting the backlight brightness to a BATTERY REMAIN OFF For selecting whether to display the : level from 0 to 60. The higher the setting, ON remaining battery charge. 60 the brighter the backlight. OFF: The remaining charge is not displayed. ON: The remaining charge is displayed. FUNCTION WFM For setting the function to be allocated to STATUS DISPLAY CONTINUE For setting how long the status
Resumo do conteúdo contido na página número 11
MAIN MENU INPUT SELECT Item Setting Description Item Setting Description 1 1 SDI1 * OFF For setting whether the SDI 1 signals can SDI2 * OFF For setting whether the SDI 2 signals can ON be selected when the channels are to be ON be selected when the channels are to be switched using the INPUT button. switched using the INPUT button. OFF: The SDI 1 signals cannot be selected. OFF: The SDI 2 signals cannot be selected. ON: The SDI 1 signals can be selected. ON: The SDI 2 signals can be selected. F
Resumo do conteúdo contido na página número 12
MAIN MENU INPUT SELECT CONTROL Item Setting Description Item Setting Description FORMAT AUTO For selecting the signals whose input is to CONTROL LOCAL For selecting where the operations are to 1080/60I be accepted in the YPBPR mode and in the REMOTE be initiated. 1080/50I RGB mode. LOCAL: Only operations initiated from the 1080/30P The signals can be set for each mode, and main controls can be performed. 1080/25P when the MODE item setting is switched Remote control operations cannot 1080/24P fr
