Resumo do conteúdo contido na página número 1
USER’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL USUARIO
Resumo do conteúdo contido na página número 2
Index Warning .................................................................................................................... 1 Contents ...................................................................................................................2 Component Names and Functions...................................................................3 Quick Start ..............................................................................................................5 Controls .....
Resumo do conteúdo contido na página número 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNI
Resumo do conteúdo contido na página número 4
Contents Your new NEC AccuSync LCD monitor box* should contain the following: • AccuSync LCD monitor • Power Cord • User’s Manual • Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D) • Audio Cable AccuSync LCD Monitor • Base Stand (Stand not connected) • Cable Holder Power Cord Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male) DVI-D Cable Audio Cable USER’S MANUAL MANUEL D’UTILISATION MANUAL DEL USUARIO
Resumo do conteúdo contido na página número 5
Component Names and Functions 12 3 4 5 6 1 Source Switches the input source being displayed. 2 Auto When not in OSD menu, enables Auto Adjust. When in OSD Menu, acts as an EXIT key. When not in OSD menu, lowers the sound volume. – / < 3 When in OSD menu, decreases setting value or moves left/up cursor. When not in OSD menu, raise the sound volume. + /> 4 When in OSD menu, increases setting value or moves right/down cursor. 5 Menu Opens or closes the OSD Menu. LED Blue - Power is ON. Power LED
Resumo do conteúdo contido na página número 6
} Component Names and Functions –continued LCD22WMGX 1 2 3 987654 LCD24WMCX 3 4 2 91 8 7 6 10 5 SPDIF OUT Out put the audio signal from HDMI. (COAXIAL) 1 Component (Audio) Connect Component Audio. 2 Component (Video) Connect Component Video. 3 Headphone Jack Connect the headphones to the monitor. 4 AUDIO IN Connect audio input from PC. 5 D-SUB Connect to analog RGB input. 6 DVI-D Connect to digital RGB input. 7 HDMI Connect to digital HDMI signals. 8 AC IN Connect power cord to monitor. 9 Kensin
Resumo do conteúdo contido na página número 7
Quick Start To attach the Base to the LCD Stand: 1. Insert the front of the LCD Stand into the holes in the front of the Base (Figure 1). 2. Next, position the locking tabs on the back side of the LCD Stand with the holes on the Base. Lower the Stand until locking tabs are secure. Figure 1 Stand Locking Tabs Front Base To attach the AccuSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect th
Resumo do conteúdo contido na página número 8
Quick Start –continued Figure A.1 Figure A.2 DVI Signal Cable (not included) Figure A.3 Macintosh Cable Adapter (not included) Note: Some Macintosh Power Cable systems do not require a Macintosh Cable Adapter. Input (HDMI) Input (DVI) Input (VGA) Cable Holder Head phones Figure B.1 Cable holder Power button Figure C.1 6
Resumo do conteúdo contido na página número 9
Quick Start –continued Connecting to DVD player, Stereo Amplifi er: 1. Turn off the power to the monitor. 2. For DVD player with component out: Connect the Component (RCA) connector (not included) to the LCD monitor. (Figure D.1). For DVD player with HDMI out: Connect HDMI cable to the DVD player (Figure D.1). NOTE: Refer to your DVD player user’s manual for more information. For Stereo Amplifi er: Connect HDMI cable to the DVD player. Connect the stereo RCA cable to the (COAXIAL) connector
Resumo do conteúdo contido na página número 10
Quick Start –continued Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Figure TS.1 NOTE: Handle with care when tilting the monitor screen. Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a nonabrasive surface (Figure R.1). 3. Remove the 3 screws connecting the monitor to the stand and slide the stand off from the LCD (Figure R.1). The moni
Resumo do conteúdo contido na página número 11
Quick Start –continued Removing the Base Note: Always remove the Base when shipping the LCD. 1. Place monitor face down on a non-abrasive sur face. 2. Using your thumbs, press the quick release button Quick release button to unlock the stand. 3. Pull the unlocked base off the stand. Connecting a Flexible Arm This LCD monitor is designed for use with a fl exible arm. Please use the attached screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor m
Resumo do conteúdo contido na página número 12
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: Basic Key Functions: Button SOURCE AUTO – /< + /> MENU Activate Auto Select Decrease Increase OSD Adjustment OSD Off Signal volume volume displayed function (hold for 2 seconds) OSD On Cursor Cursor Go to Sub (Main Menu Exits Menu moves up moves menu selection selection down stage stage) OSD On Cursor Cursor Go to (Sub menu Exits Menu moves up moves Adjustment selection down stage stag
Resumo do conteúdo contido na página número 13
Controls –continued Main Menu Selection stage Press “MENU” key OSD Press off “– / <” or “+ />” key Press “AUTO” key Press “– / <” or “+ />” key Main Menu Selection stage Press “AUTO” key Adjust by using Press “– / <” or Press “+ />” key “AUTO” key “MENU” key Main Menu Selection stage Adjustment stage Press “MENU” key Select item by using “– / <” or “+ />” key Press “AUTO” or “MENU” key 11
Resumo do conteúdo contido na página número 14
Controls –continued ADJUSTING THE PICTURE The description for function-control Contrast Adjusts image brightness in relation to the background. Brightness Adjusts overall image brightness. Choose one of the following Eco settings: Standard: Brightness=90, Contrast=50 (adjustable) Text: Brightness=20, Contrast=80 (nonadjustable) Eco Luminance Internet: Brightness=40, Contrast=80 (nonadjustable) Game: Brightness=60, Contrast=80 (nonadjustable) Sports: Brightness=100, Contrast=80 (nonadjustable)
Resumo do conteúdo contido na página número 15
Controls –continued Normal Color Temperature Normal (RGB value is nonadjustable) Warm Color Temperature Warm (RGB value is nonadjustable) Cool Color Temperature Color Cool (RGB value is nonadjustable) Temp. sRGB Color Temperature sRGB (RGB value is nonadjustable) (for the model with sRGB function) Adjust R.G.B.Y.C.M levels as desired. User-R: Adjust Red Gain. User-G: Adjust Green Gain. User-B: Adjust Blue Gain. User-Y: Adjust Red/Green Gain. User User-C: Adjust Green/Blue Gain. User-M : Adju
Resumo do conteúdo contido na página número 16
Controls –continued Frame Size (When Bright Adjust the size of the Frame. Frame is on) Brightness (When Bright Brightness Adjustment for Enhance Area Frame is on) Contrast (When Bright Contrast Adjustment for Enhance Area Frame is on) Picture Hue (When Boost Bright Frame Hue Adjustment for Enhance Area is on) Saturation (When Bright Saturation Adjustment for Enhance Area Frame is on) Position Adjust the horisontal position of the Frame (When Bright Adjust the vertical position
Resumo do conteúdo contido na página número 17
C Contr ontro ols ls –continued –continued OSD MESSAGE 1). When an analog signal is displayed, and the “AUTO” button is pressed, this Auto Confi g. message will appear while the display is performing the Auto Confi guration. 2). This message does not appear when digital signals are used. Please Wait When the Hsync Frequency, Vsync Frequency or Resolution is out of the monitor’s Input Not support range, will show this message. Supported When the video cable is not connected, or the video cable
Resumo do conteúdo contido na página número 18
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE ACCUSYNC LCD COLOR MONITOR: � DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel. � Do not spill any liquids into the cabinet or use your monitor near water. � Do not insert objects of any kind into the cabi
Resumo do conteúdo contido na página número 19
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: � For optimum performance, allow 20 minutes for warm-up. � Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. � Position your monitor no closer than 16 inches and no fur
Resumo do conteúdo contido na página número 20
Specifi cations Monitor AccuSync LCD22WMGX Notes Specifi cations Monitor LCD Module Diagonal: 22.0 inch Active matrix; thin fi lm transistor (TFT) Viewable Image Size: 22.0 inch liquid crystal display (LCD); 0.282 mm dot 2 Native Resolution (Pixel Count): 1680 x 1050 pitch; 300cd/m white luminence; 1000:1 contrast ratio, typical; Time 5ms response Input Signal PC Input: Analog Input 0.7Vp-p/75 Ohms Digital Input: DVI Sync:Separate sync TTL Level (Positive/Negtive)
