Resumo do conteúdo contido na página número 1
MultiSync LCD200
User’s Manual
Resumo do conteúdo contido na página número 2
Declaration of the Importer We hereby certify that the Color monitor LA-1221JMW MultiSync LCD200 is in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 60555-2 - EN 60555-3 - EN 50082-1 (IEC 801-2) (IEC 801-3) (IEC 801-4) and marked with NEC Europe Ltd. Ismaning Office Steinheilstraße 4-6 D-85737 Ismaning, Germany
Resumo do conteúdo contido na página número 3
Safety Instruction Caution: When operating the LA-1221JMW with a 220-240V AC power source in Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. When operating the LA-1221JMW with a 220-240V AC Power source in Australia, use the power cord provided with the monitor. For all other cases,
Resumo do conteúdo contido na página número 4
English Deutsch Français Español Italiano Appendix
Resumo do conteúdo contido na página número 5
English
Resumo do conteúdo contido na página número 6
Introduction to the NEC MultiSync LCD200 E- 1 Introduction to the NEC MultiSync LCD200 Congratulations on your purchase of the NEC MultiSync LCD200 true color monitor! True Color Monitor The MultiSync LCD200 monitor incorporates NEC’s own l2.1" true color active matrix thin-film-transistor (TFT) liquid crystal display to provide superior display performance and a reduced footprint. Less than 18 cm in depth, the MultiSync LCD200 monitor is ideal for environments with space and weight constraints
Resumo do conteúdo contido na página número 7
E - 2 Introduction to the NEC MultiSync LCD200 Wider Compatibility Adapting the latest advances in satellite technology to the circuitry employed within the MultiSync LCD200 monitor, NEC provides wide range compatibility with today’s graphics driver technology. Because the MultiSync LCD 200 monitor is analog through and through, it does not require special analog to digital display or interface cards but can accept RGB input directly. Consequently, the same display cards that are used to drive t
Resumo do conteúdo contido na página número 8
Introduction to the NEC MultiSync LCD200 E- 3 requirements. With a maximum power consumption of 33 watts, the MultiSync LCD200 monitor consumes over 50% less power than conventional CRTs and emits less heat. In its power-saving mode, the MultiSync LCD200 monitor consumes less than 6 watts. All this translates into energy savings, environmental protection, reduced emissions and reduced air conditioning costs of the work environment. The MultiSync LCD200 monitor follows the Video Electronics
Resumo do conteúdo contido na página número 9
E - 4 Introduction to the NEC MultiSync LCD200 ErgoDesign Features The MultiSync LCD200 monitor utilizes NEC’s ErgoDesign features philosophy that adapts technology to the way you work, increasing productivity through enhancements in comfort and ease of use. ErgoDesign features include a low glare screen treatment, power and brightness controls that are positioned within easy reach, easy-to-use on-screen controls and a tilt base that easily adjusts to each individual’s preferred angle of v
Resumo do conteúdo contido na página número 10
Introduction to the NEC MultiSync LCD200 E- 5 Through the OSM control’s enhanced ColorControl System, you can better match your image color to a variety of standards such as: – Your personal preference (depending upon the application used). – A color standard such as Pantone or Trumatch. – Another monitor. – Your printer or Service Bureau output. Additional OSM controls are available such as OSM Location, OSM Turn Off Time, OSM Lock Out, Display Mode, Language Select and Factory Preset.
Resumo do conteúdo contido na página número 11
E - 6 Contents of Package Contents of Package Included with your MultiSync LCD200 monitor are the following items: – NEC MultiSync LCD200 (Model LA-122lJMW) true color monitor. – AC power cable. – Video signal cable (15 pin mini D-sub male to 15 pin mini D-sub male). – User’s manual. Remember to save the original box and packing materials to transport or ship this monitor.
Resumo do conteúdo contido na página número 12
Recommended Use E - 7 Recommended Use For optimum performance, please note the following when setting up and using the MultiSync LCD200 color monitor: • The optimum monitor position is facing away from direct sunlight. • Allow adequate ventilation around the monitor so that heat can properly dissipate. • Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire. • Use the monitor in a clean and dry area. • Handle with care when transporting. Save packaging for
Resumo do conteúdo contido na página número 13
E - 8 Installation Installation Connection to your Personal Computer (NEC and PC Compatibles) The MultiSync LCD200 true color monitor complements NEC and PC compatible computers. Your system has one of two configurations: – the video controller is built into the computer. – the video controller is in the form of a display card (sometimes referred to as graphics card, video adapter or graphics board). Both configurations have a video connector (or a CRT PORT on laptop computers). If you are not s
Resumo do conteúdo contido na página número 14
Installation E - 9 Connection to your Personal Computer (Macintosh) With the Macintosh cable adapter, the MultiSync LCD200 color monitor is compatible with the Macintosh family of computers, Power Macintosh, Mac Quadra Series, Mac Centris Series, Mac LC series, Mac Performa series, PowerBooks and other NuBus/PCI display cards @ 640x480, 800x600, and 1024x768 resolutions. You will connect your MultiSync color monitor one of two ways to your Macintosh computer: – On-board video port – NuBus/PCI/PD
Resumo do conteúdo contido na página número 15
E - 10 Installation 8. This completes the installation. Power Macintosh 6100/60 and 66 users need to use the Apple HDI-45 cable adapter and Powerbook users need to use the Apple VID-14 cable adapter in conjunction with the appropriate MultiSync Macintosh cable adapter when connecting a MultiSync monitor. Connection to Other Computers or Display Cards If your computer or display card is not compatible with the MultiSync LCD200 color monitor’s PRESET signals or has a different pin assignment, refe
Resumo do conteúdo contido na página número 16
Controls E - 11 Controls Direct Controls EXIT: Has no function SETTING ▼ /▲ : Selects between two sets of parameters for each resolution. Each selection can be preset by adjusting the OSM controls to your preference. Changes are saved automatically. LCD Brightness -/+: Adjusts the overall image and background screen brightness. PROCEED: Accesses OSM controls menu RESET: Has no function LED Power Indicator Light: Located on the lower right and indicates the monitor’s power mode. Each mode reduc
Resumo do conteúdo contido na página número 17
E - 12 Controls OSM Controls The OSM controls on the front of the monitor provide the following functions: Control In the Main Menu In the Sub Menu EXIT ▼ /▲ Exits the OSM controls. Exits to the OSM controls menu. SETTING Moves the highlighted Moves the highlighted area up/down to select area up/down to select one of the controls. one of the controls SETTING -/+ Has no function. Moves the bar in the + or - direction to increase or decrease the adjustment. PROCEED Proceeds to selected Proceeds to
Resumo do conteúdo contido na página número 18
OSM Control Menus E - 13 OSM Control Elements Typical On Screen Manager windows have the following elements: Control Function Highlight Indicates the selected menu or Control Scroll Bar Indicates direction of adjustment Numeric Reading Provides a number to remember, record or compare a specific setting. OSM Control Menus Main Menu ON SCREEN MANAGER Position Image Adjust Contrast AccuColor OSM Location OSM Turn Off Time OSM Lock Out The arrow in the bottom or upper right corner indicates that fur
Resumo do conteúdo contido na página número 19
E - 14 OSM Control Menus Position Menu Up/Down: Moves the image vertically up or down. Left/Right: Moves the image horizontally left or right. Position Up Left Right Down Image Adjust Adjust the horizontal size of the image by increasing or decreasing the coarse total. Focus, clarity and image stability can be improved by increasing or decreasing the Fine total. Image Adjust Coarse 1280 Fine 31
Resumo do conteúdo contido na página número 20
OSM Control Menus E - 15 Contrast The contrast level of the monitor’s display can be adjusted by increasing or decreasing the total. Contrast Contrast 100 AccuColor Control System Menu Preset(Setting): Selects the desired color setting. The bar is replaced by the color setting choice (from 1 to 3). Each color setting is adjusted at the factory to the stated degree Kelvin. If a setting is adjusted, the name of the setting will change from degree Kelvin to Custom. AccuColor Preset: 6600 Kelvin 12
