Resumo do conteúdo contido na página número 1
MULTI-FORMAT MONITOR
BEDIENUNGSANLEITUNG :MULTI-SYSTEM-MONITOR
MANUEL D’INSTRUCTIONS :MONITEUR MULTI-FORMAT
MANUALE DI ISTRUZIONI :MONITOR MULTI-FORMATI
INSTRUCCIONES :MONITOR MULTIFORMATO
!" : !"#$
INSTRUCTIONS
DT-V1900CG
The illustration shows the DT-V1900CG with provided wide
mask attached.
Die Abbildung zeigt Modell DT-V1900CG mit angebrachtem
mitgelieferten Breitformat-Vorsatzrahmen.
L’illustration montre le DT-V1900CG avec le masque large fourni
monté.
L’illustrazione raffigura il DT-
Resumo do conteúdo contido na página número 2
INSTRUCTIONS MULTI-FORMAT MONITOR DT-V1900CG Thank you for purchasing this JVC Multi-Format Monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. For Customer Use: Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference. Model No. : DT-V1900CG Serial No. : CONTENTS SAFETY PRECAUTIONS ........................................................................2 CONTROLS AN
Resumo do conteúdo contido na página número 3
SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. FCC NOTICE (U.S.A. only) WARNINGS To prevent fire or shock hazard, do not expose this CAUTION: Changes or modifications not approved by monitor to rain or moisture. Dangerous high voltages JVC could void the user’s authority to operate the are present inside the unit. Do not remove the back equipment. cover of the cabinet. When servicing
Resumo do conteúdo contido na página número 4
POWER CONNECTION The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. Power cord Power supply voltage : AC 120 V AC 230 V AC 230 V Countries : U.S.A. and Canada European countries United Kingdom Warning: ● Do not use the same Pow
Resumo do conteúdo contido na página número 5
! CONTROLS AND FEATURES FRONT VIEW 2 3 4 5 7 8 11 12 13 14 18 19 20 21 22 23 24 25 1 UNDER PULSE COLOR MUTING DEGAUSS SCAN CROSS OFF POWER SLOT 1 SLOT 2 SLOT 3 A B C D E F MENU SCREENS ASPECT AREA INPUT SELECT VOLUME CHECK MARKER MUTING DEGAUSS UNDER SCAN CROSS PULSE COLOR OFF SLOT 1 SLOT 2 SLOT 3 POWER A B C D E F VOLUME MENU SCREENS ASPECT AREA INPUT SELECT CHECK MARKER 6 9 10 15 16 17 Tally lamp EMBEDDED AUDIO channel switch button 1 8 Lights when the tally control signal is ON.
Resumo do conteúdo contido na página número 6
REAR/SIDE VIEW MAKE RS-232C 26 27 30 28 MAIN POWER 29 Refer to pages 6 and 8 for correspondence between the 14 COLOR OFF button/lamp input terminals and the INPUT SELECT buttons. Press the COLOR OFF button. The button lights and the screen becomes monochrome. When the COLOR OFF 24 Power lamp button is pressed while lit, the light goes off and the Unlit : The main power is OFF. normal screen is restored. Orange : The main power is ON, but the monitor’s power Use this fun
Resumo do conteúdo contido na página número 7
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) COMPONENT/RGB INPUT CARD (OPTIONAL: IF-C01COMG) 1 Video input/output terminals Input (IN) and output (OUT) terminals for component (colour difference) or RGB signals. The IN and OUT terminals are bridge-connected. G/Y (When no cable is connected to the OUT terminal, the input signal is automatically terminated.) IN OUT B/PB/B-Y Select component signal : press INPUT SELECT A/C/E button 1 Select RGB signal : press INPUT SELECT B/D/F IN OUT R/PR/B-Y b
Resumo do conteúdo contido na página número 8
SDI INPUT CARD (OPTIONAL: IF-C01SDG) 1 Output terminal for a selected component serial digital signal SWITCHED Output terminal for a selected digital signal (the input OUT displayed on the screen). The output signal is cable- 1 compensated. NOTE: When the monitor’s power is OFF, no digital IN SDI 1 signal is output. 2 Input terminals for component serial digital 2 IN SDI 2 signals 4 Input terminals for the digital signal. Select SDI 1 : press INPUT SELECT A/C/E button A UDIO 1 Select SDI 2 : p
Resumo do conteúdo contido na página número 9
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) (cont'd) HD SDI INPUT CARD (OPTIONAL: IF-C12HSDG) Input and output terminals for HD SDI 1 1 component serial digital signals E.AUDIO HD SDI 1 Input (IN) and output (OUT) terminals for HD serial digital signals. IN Select HD SDI 1: press INPUT SELECT A/C/E button 1 OUT Input and output terminals for HD SDI 2 2 E.AUDIO component serial digital signals HD SDI 2 Input (IN) and output (OUT) terminals for HD serial digital 3 IN signals. 2 Select HD SDI 2:
Resumo do conteúdo contido na página número 10
PREPARATION INSTALLING THE INPUT ATTACHING THE WIDE CARD MASK Optional input cards are necessary to use the functions of this A wide mask is provided with the monitor. This changes the monitor. Before mounting the monitor or connecting other viewable screen area to the 16:9 aspect ratio. equipment to the monitor, be sure to install the input cards. The wide mask cannot be attached to the monitor after the monitor is mounted in a rack. Mount the wide mask before 1. Turn off the Multi-Format M
Resumo do conteúdo contido na página número 11
PREPARATION (cont'd) ATTACHING THE POWER CORD HOLDER The provided Power Cord Holder prevents accidental disconnection of the AC power cord from the AC inlet. The Power Cord Holder consists of two parts; a case and cover. 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws (provided). 2 Attach the Power Cord Holder cover to the AC power cord. Press the cover until it clicks. 3. Connect the AC power cord to the AC inlet, and join the Power Cord Holder co
Resumo do conteúdo contido na página número 12
BASIC MENU OPERATIONS (MAIN MENU, SETUP MENU) ABOUT MENU SCREENS BASIC MENU OPERATION This monitor features a MAIN MENU (main menu screen) and ● To select an item, a SETUP MENU (setup menu screen). Press the or buttons to move the cursor (4) on the The MAIN MENU contains the functions normally used, and Menu Screens and select the desired item. the SETUP MENU contains the settings required for initial ● To set (select) or adjust an item, setup. Press the or buttons to select or adjust th
Resumo do conteúdo contido na página número 13
HOW TO USE “MAIN MENU” “MAIN MENU” ITEMS The following items appear in MAIN MENU. Items Functions Displays 1 APERTURE CONTROL Compensates the frequency characteristics of the input video signal. *1 2 SLOT CONDITION Displays the status of the input cards installed in each of the input card slots. 3 sub menu POSITION Selects the display position of the sub menu superimposed on the screen. 4 AREA MARKER Selects the size marker for the other screen ratio used when the screen *2 ratio is 16:9. 5 AR
Resumo do conteúdo contido na página número 14
ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. APERTURE CONTROL 3. sub menu POSITION Compensates the frequency Items : Selects the display position of the sub menu characteristics of the input superimposed on the screen. LEVEL : 00 video signal. Press the CONTROL FREQ. :HIGH Settings : UPPER/LOWER sub menu reset button to display the setting Functions : UPPER : An adjustment item is displayed on the menu illustrated on the right. top of the screen. NOTE :
Resumo do conteúdo contido na página número 15
HOW TO USE “MAIN MENU” (cont'd) 5. AREA MARKER-R R-Y PHASE 90 Items : Selects the size marker for the other screen ratio R/B GAIN 0.79 (aspect) used when the screen ratio is 16:9. (for ITU601 external control) G-Y PHASE 244 Settings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2 G/B GAIN 0.45 Functions : OFF: The marker is not displayed. R-Y PHASE 90 16:9/4:3/13:9/14:9: Displays the marker (a white quadrangle) showing the screen size of each R/B GAIN 0.86 ITU709 aspect ratio. G-Y PHASE 244 MODE 1/MODE 2
Resumo do conteúdo contido na página número 16
HOW TO USE “SETUP MENU” “SETUP MENU” ITEMS Items Functions 1 FUNCTION SETTING Displays the monitor’s power-up time or the total usage time. 2 PICTURE SUB ADJ. Performs approximate adjustments using the control knobs on the front panel. 3 COLOR TEMP./BAL. Sets or adjusts the colour temperature or white balance. 4 SIZE/POSI. ADJ. Adjusts the size or position of the picture. 5 DISTORTION ADJ. Compensates the picture distortion. 6 STATUS DISPLAY Makes the status of the input signal appear or disap
Resumo do conteúdo contido na página número 17
HOW TO USE “SETUP MENU” (cont'd) ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS 1. FUNCTION SETTING Item : REMOTE SYSTEM Selects the colour system and Settings : MAKE/TRIGGER COLOR SYSTEM :AUTO displays the monitor’s power-up SYNC SELECT :AUTO Function : Selects the contact system (MAKE (make RUSH DELAY TIME :STD. time or the total usage time. TALLY SELECT :GREEN contact) or TRG. (trigger contact)) for the MAKE/ REMOTE SYSTEM :MAKE EMBEDDED
Resumo do conteúdo contido na página número 18
3. COLOR TEMP./BAL. Item : CONTRAST Sets or adjusts the colour Adjustment temperature or white balance. range : –20 ~ 00 ~ +20 COLOR TEMP. :LOW Press the button to display BLUE DRIVE : 000 Function : For approximate adjustment of the picture RED DRIVE : 000 the setting menu illustrated on GREEN CUTOFF : 000 contrast. Before adjustment, set the CON- BLUE CUTOFF : 000 the right. RED CUTOFF : 000 TRAST knob on the front panel to 0. sub menu
Resumo do conteúdo contido na página número 19
HOW TO USE “SETUP MENU” (cont'd) 4. SIZE/POSI. ADJ. 5. DISTORTION ADJ. Adjusts the size or position of Compensates the picture the picture. Press the distortion. Press the button H.SIZE : 00 PINCUSHION : 00 button to display the setting to display the setting menu H.POSITION : 00 PIN.BALANCE : 00 V.SIZE : 00 PARALLELOGRAM : 00 menu illustrated on the right. illustrated on the right. V.POSITION : 00 TRAPEZO
Resumo do conteúdo contido na página número 20
6. STATUS DISPLAY 7. CONTROL LOCK Makes the status of the input Item : CONTROL LOCK signal appear or disappear on Settings : OFF/ON STATUS DISPLAY :ON the screen. Press the Function : Invalidates most of operations on the front panel 1080/1035 :1080 button to display the setting (including menu screen operations). menu illustrated on the right. OFF : Enables normal operations. ON : Invalidates all operations except the power EXIT: MENU ADJUST:- + SELECT: switch an
