Resumo do conteúdo contido na página número 1
S1922/S1922a and S2022a LCD Monitor
User Guide
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
© 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions con
Resumo do conteúdo contido na página número 4
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides imp
Resumo do conteúdo contido na página número 5
Table of Contents About This Guide 1. Product Features HP LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Safety and Maintenance Guidelines Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Precautions . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 6
A. Troubleshooting Solving Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Getting Support from hp.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Preparing to Call Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 7
1. Product Features HP LCD Monitors The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) screen with the following features: • Large diagonal display • Maximum graphics resolution: S1922: 1366 x 768 @ 60Hz S1922a: 1366 x768 @ 60Hz S2022a: 1600 x 900 @ 60Hz Plus full-screen support for lower resolutions • VGA analog signal • DVI digital signal on select models • Easy viewing from a sitting or standing position, or while moving from one side of th
Resumo do conteúdo contido na página número 8
2. Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the "Connecting the Power Cable" . WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important safety feature.
Resumo do conteúdo contido na página número 9
• Do not allow anything to rest on the power cord. Do not walk on the cord Maintenance Guidelines To enhance the performance and extend the life of the monitor: • Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. • Use only a power source and connection appr
Resumo do conteúdo contido na página número 10
3. Setting Up the Monitor Unpacking the Monitor 1. Unpack the monitor. Make sure all contents are included. Store the packing box. 2. Turn off the computer and other attached devices. 3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation. Installing the Monitor You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near y
Resumo do conteúdo contido na página número 11
3. Press the base into the column until it locks in position. Figure 3-2 Attaching the Base 4. Lift the monitor to an upright position and place on a flat, stable surface. Figure 3-3 Monitor in upright position Preparing the monitor for wall-mounting 1. Check the stability of the wall-mounting fixture. WARNING! To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting fixture is adequately installed and secured before attaching the monitor. R
Resumo do conteúdo contido na página número 12
5. Slide the base away from the bottom of the monitor. Figure 3-5 Sliding the base away from the monitor 6. Remove the screws on the back of monitor. Figure 3-6 Removing the screws from the back of the monitor 7. Four threaded holes are exposed. These holes are for screws to attach the swing arm or other mounting fixture to the back of the monitor. 8. Follow the instructions included with the mounting fixture to ensure that the monitor is safely attached. The four threaded holes that
Resumo do conteúdo contido na página número 13
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor are turned off and unplugged. 1. To connect the VGA cable Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer. 2. T
Resumo do conteúdo contido na página número 14
High-Bandwidth Digital Content Protection (HDCP) (Available on Select Models) Your monitor supports HDCP and can receive high-definition content. High-definition content is available in many sources, such as Blue-ray Disc devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when playing high-definition protected content. Your computer graphics card and monitor must both support HDCP to display prote
Resumo do conteúdo contido na página número 15
Adjusting the Tilt For optimal viewing, adjust the screen tilt to your own preference, as follows: 1. Face the front of the monitor and hold the base so that you do not topple the monitor while changing the tilt. 2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, without touching the screen. Figure 3-10 Tilt adjustment ENWW Adjusting the Tilt 9
Resumo do conteúdo contido na página número 16
4. Operating the Monitor CD Software and Utilities The CD that is included with this monitor contains drivers and software that you can install on your computer. Installing Drivers If you determine that you need to update the drivers, you can install the monitor driver INF and ICM files from the CD, or download them from the Internet. Installing the monitor driver software from the CD To install the monitor driver software from the CD: 1. Insert the CD in your computer CD drive. The CD menu ap
Resumo do conteúdo contido na página número 17
Front-Panel Controls The monitor buttons are located on the bottom of the front panel Figure 4-1 Front-panel control buttons No. Icon Description 1Power Turns the monitor on or puts it in standby or sleep mode. The Power button is located on the bottom or front of the monitor depending on the model. 2Menu Opens, selects, or exits the OSD menu. 3+ Navigates forward through the OSD menu and increases adjustment levels. 4- Navigates backward through the OSD menu and decreases adjustment leve
Resumo do conteúdo contido na página número 18
Using the On-Screen Display (OSD) Main Main 1st Sub 2nd Sub Adjust Menu Item Menu Icon Menu Item Menu Item Description Range Reset Value Luminance Contrast N/A Contrast from Digital-register. 0-100 Recall Warm Each step will increase/ Contrast Value decrease value by 1 Brightness N/A Backlight Adjustment 0-100 Recall Warm Each step will increase/ Brightness Value decrease value by 1 Eco Mode N/A Picture Adjustment, Standard Recall to Brightness = 90, Standard Mode Contrast = 50. Brightness,
Resumo do conteúdo contido na página número 19
Main Main 1st Sub 2nd Sub Adjust Menu Item Menu Icon Menu Item Menu Item Description Range Reset Value Image Clock N/A Adjust picture Clock to reduce 0-100 Do Auto Setup Vertical-Line noise. Configure Each step will increase/ decrease value by 1 Phase N/A Adjust Picture Phase to 0-100 Do Auto reduce Horizontal-Line noise. Configure H. Position N/A Adjust the horizontal position 0-100 Do Auto of the picture. Configure V. Position N/A Adjust the vertical position of 0-100 Do Auto the pictur
Resumo do conteúdo contido na página número 20
Main Main Sub Adjust Menu Item Menu Icon Menu Item Description Range Reset Value Color Temp. Warm Recall Warm Color N/A The Color Temperature. Temperature will be set to Warm. Normal Recall Normal Color N/A Temperature. The User R/G/B value (default is Cool Recall Cool Color N/A 50) will can be Temperature. Modified by Reset sRGB Recall sRGB Color N/A function in user (for select Temperature. mode. models with sRGB function) Red Red Gain from Digital- 0-100 register. Each step will inc
