Resumo do conteúdo contido na página número 1
HP LP3065 30" LCD Monitor
User Guide
Resumo do conteúdo contido na página número 2
© 2006 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this
Resumo do conteúdo contido na página número 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE Text set off in this manner provides important supple
Resumo do conteúdo contido na página número 4
iv About This Guide ENWW
Resumo do conteúdo contido na página número 5
Table of contents 1 Product Features HP LP3065 ........................................................................................................................................... 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 2 Maintenance Guidelines ..........................................................................................................
Resumo do conteúdo contido na página número 6
Appendix B Technical Specifications LP3065 Model .................................................................................................................................... 22 Energy Saver Feature ........................................................................................................................ 23 Appendix C Agency Regulatory Notices Federal Communications Commission Notice ................................................................................... 24 Mod
Resumo do conteúdo contido na página número 7
1 Product Features HP LP3065 The flat panel monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: 30–inch (76.2 cm) viewable area display with 2560 x 1600 resolution ● Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● ● Tilt, swivel, and height adjustment capabilities ● Removable stand with quick release mechanism and VESA 100mm mounting holes for flexible mounting solutions ● Three DV
Resumo do conteúdo contido na página número 8
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements section in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important saf
Resumo do conteúdo contido na página número 9
Maintenance Guidelines To enhance the performance and extend the life of your monitor: ● Do not open your monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the mo
Resumo do conteúdo contido na página número 10
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE Do not install the pedestal if the monitor will be used on a wall, swing arm, or other mounting fixture; instead
Resumo do conteúdo contido na página número 11
NOTE Be sure the pedestal base is securely locked before continuing with the setup. Rear Components Figure 3-2 Rear Components Component Function 1 Cable Lock Provides slot for use with cable security locks. Provision 2 Master Power Turns off all power to the monitor. Switch 3 AC Power Connects the AC power cord to the monitor. Connector 4 DVI-D Connectors Connects the DVI-D signal cable to the monitor. 5 USB Upstream Connects the monitor USB hub to a host USB port/hub. Connector 6 USB Downstre
Resumo do conteúdo contido na página número 12
Selecting the Signal Connectors and Cables The monitor features two DVI-D dual-link connectors capable of supporting high resolution digital input. NOTE The high resolution of the monitor requires a dual-link DVI-D input signal. The monitor can only display a 2560 x 1600 resolution; therefore, the computer must support a high- performance video card that is capable of scaling all video modes to 2560 x 1600. The monitor does not support a VGA (analog) video signal input. Connect one of the DVI-D
Resumo do conteúdo contido na página número 13
Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Figure 3-4 Connecting the USB Cable WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important safety feature. • Plug the power cord
Resumo do conteúdo contido na página número 14
3. Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-5 Connecting the Power Cable 4. Place the cables through the cable management channel on the back of the pedestal base. Figure 3-6 Using the Cable Management Feature 8 Chapter 3 Setting Up the Monitor ENWW
Resumo do conteúdo contido na página número 15
Adjusting the Monitor 1. Adjust the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor 2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-8 Swiveling the Monitor ENWW Adjusting the Monitor 9
Resumo do conteúdo contido na página número 16
3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. Figure 3-9 Adjusting the Height NOTE If the display head is locked in the lowest height position, push down on the display head, press the button on the base to unlock, and then lift the monitor display head to the desired height. 10 Chapter 3 Setting Up the Monitor ENWW
Resumo do conteúdo contido na página número 17
Turning on the Monitor 1. Press the power switch to turn on the computer. 2. Press the master power switch on the rear of the LCD. 3. Press the power button on the front of the monitor. CAUTION Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on your monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time.
Resumo do conteúdo contido na página número 18
Figure 3-11 Using the Accessory Rails Feature Removing the Monitor Pedestal Base You can remove the monitor pedestal to mount the monitor on a wall, a swing arm, or other mounting fixture. CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If your monitor has a connected audio cable, disconnect it. 1. Disconnect and remove the signal and power cables from the back of the monitor. 2. Slide the quick releas
Resumo do conteúdo contido na página número 19
Mounting the Monitor 1. Remove the monitor pedestal base. Refer to Removing the Monitor Pedestal Base in the previous section. CAUTION This monitor supports the VESA industry standard 100mm mounting holes. To attach a third party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are required (not provided with the monitor). Longer screws should not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting solution is complia
Resumo do conteúdo contido na página número 20
3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step. Figure 3-14 Installing the Quick Release CAUTION The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the app
