Resumo do conteúdo contido na página número 1
SY-6IWM
Motherboard
Quick Start Guide
The SOYO CD
Aureal Sound Quick BIOS Hardware Introduction
Driver Setup Installation
Installation
Resumo do conteúdo contido na página número 2
SOYO ™ SY-6IWM Motherboard ® ® y * These specifications are subject to amend without notice 2 6IWM Serial - Version 1.2 - Edition: January 2000 "http://www.soyo.com.tw". on the Internet. The address is Web Site For further information, please visit our is subject to amend without notice. to the correctness of the contents there is no guarantee given. The information in this document has been carefully checked for reliability; however, the Motherboard. Information in this guide This Quick Star
Resumo do conteúdo contido na página número 3
1 Introduction 1 Congratulations on your purchase of the SY-6IWM Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-6IWM Motherboard Uses ’ Guide that came with your Motherboard. Unpacking When unpacking the Motherboard, check for the following items: u The SY-6IWM FW82810E AGP/PCI/AMR Motherboard u T
Resumo do conteúdo contido na página número 4
SY-6IWM Motherboard Layout B e r 1 r 1 3 CPUFAN 1 1 2 T FDC 3V Intel Lithium 1 E Battery 5 USB3 A 1 1 SDRAM SDRAM JOYSTICK 4 T L r r_ _ e N k + 3 a e I _ p 1 K 4 S ++ 1 k c o PHONE-IN 1 l 3 1 2 3 yT 11 1 4 e K_ M M M 2 3 r RAM M M M 3 I I It + D D D 9 1 7 Intel AUX-IN 1 14 82802AB 4MB C AC97 2 4 N1 Intel 1 A N 3 5 r EIT r Winbond l 1 3 W83627HF 1IR 5 -AW 1 AU8810 4 Introduction (Optional) Aurea Jumpe CMOS Clea JP PCI Slot # CHAFA FW82801A J9 CD-I PCI Slot # CODE PCI Slot # JP J10 JP
Resumo do conteúdo contido na página número 5
Key Features Ø Pentium® III processor (450-733MHz), Ø Supports onboard hardware monitoring Pentium® II processor (233-450MHz) & and includes Hardware Doctor ™ utility Celeron ™ processor (266-433MHz) Ø Fan speed control Ø Supports 66/100/133 MHz Front Side Bus Frequency Ø Battery Low voltage Detect Ø Auto-detect CPU voltage Ø Supports multiple-boot function Ø Chipset integrated 3D AGP Accelerator Ø Y2K Complaint Ø Easy CPU settings in BIOS with the Ø Supports Audio Modem Riser slot (AMR “ SOYO
Resumo do conteúdo contido na página número 6
2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly in its socket. Follow the direct
Resumo do conteúdo contido na página número 7
Install the Motherboard Follow the steps below in order to perform the installation of your new SY-6IWM Motherboard. Install the CPU Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz FSB 100MHz FSB 133MHz To mount the processor that you have purchased separately, follow these instructions. Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat dissipation. Failing to install these items may result in o
Resumo do conteúdo contido na página número 8
Configure Memory Your board comes with three DIMM sockets, and supports up to 512MB main memory using industry standard Synchronous DRAM (SDRAM), single or double-sided, 3.3V unbuffered DIMM modules from 8MB to 256MB. Registered DIMMs or DIMMs populated with 4 bit wide SDRAM devices are not supported. PC100 compliant DIMM module is required regardless of 66, 100 or 133 MHz FSB speed. 1 2 2. 8 Hardware Installation with DIMM2 left empty, will make the system not working. system work proper
Resumo do conteúdo contido na página número 9
SY-6IWM Quick Start Guide Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on connecting internal and external peripherals to your new SY-6IWM Motherboard,
Resumo do conteúdo contido na página número 10
SY-6IWM Set JP2, JP3,JP4 and JP7 to configure CPU FSB Frequency The FSB Frequency can be set through the BIOS [SOYO COMBO SETUP]. The BIOS will allow selection from 1 out of 3 intervals. The intervals are: - 66 to 100MHz - 100 to 133MHz - 133Mhz and above What interval can be selected from depends on the jumper setting on the board. Ø CPU Default or Free Selection Ø CPU frequency indication Your INTEL CPU has pins that tell the motherboard what frequency it is supposed to run at. If your CPU i
Resumo do conteúdo contido na página número 11
SY-6IWM Quick Start Guide U Free JP3 JP7 JP2 JP4 Selection Short Short 66MHz open open 66~75 MHz Pin 2-3 Pin 2-3 1 2 3 1 2 1 2 3 1 2 Short Short 100MHz open open 100~140MHz Pin 1-2 Pin 2-3 1 2 3 1 2 1 2 3 1 2 Short Short 133MHz open open 133~150MHz Pin 1-2 Pin 1-2 1 2 3 1 2 1 2 1 2 3 Set JP9 for hardware Write-Protect This jumper sets FWH (Firm Ware Hub or BIOS) Write-protect when open, Short JP9 ONLY when the BIOS needs to be upgraded. 1 2 1 2 Enable/Disable Power-On by Keyboard (JP1) You may
Resumo do conteúdo contido na página número 12
SY-6IWM CMOS Clear (JP5) After you have turned off your computer, clear the CMOS memory by momentarily shorting pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting in order to recover and retain the default settings. Jumper JP5 can be easily identified by its white colored cap. Short pin 2-3 for Short pin 1-2 to at least 5 seconds to retain new settings JP5 Setting clear the CMOS 1 2 3 1 2 3 12 Hardware Installation performing the CMOS Clear operation.
Resumo do conteúdo contido na página número 13
3 Quick BIOS Setup 3 After completion of hardware installation, turn the power switch on, then press the key while the system diagnostic is checking to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be displayed on screen. Then follow these steps to configure the CPU settings. Select [Standard CMOS Features] Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “ Auto ” . Select [Load Optimized Defaults] Select the “ Load Optimized Defaults ” menu and t
Resumo do conteúdo contido na página número 14
Select [SAVE & EXIT SETUP] Press to save the new configuration to the CMOS memory, and continue the boot sequence. 14 Quick BIOS Setup Step 4. Quick Start Guide SY-6IWM
Resumo do conteúdo contido na página número 15
4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-6IWM Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains the user's manual file for your new (1) Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Menu will
Resumo do conteúdo contido na página número 16
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your scree
Resumo do conteúdo contido na página número 17
driver revision: Intel Whitney VGA Drivers for Win9x Intel Whitney VGA Drivers for NT 4.0 Intel inf utility for Win9x Intel Whitney security utility for Win9x/NT Whitney Winbond hardware doctor for win 95/98 Aureal Audio Application Cancel OK (Driver Installation Menu) A short description of all available drivers follows: Ø Ø Ø Ø . T f Ø Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. It is also pos
Resumo do conteúdo contido na página número 18
Check the Latest Releases Click the 'Check the latest Releases' button to go the SOYO Website to automatically find the latest BIOS, manual and driver releases for your motherboard. This button will only work if your computer is connected to the internet through a network or modem connection. Make sure to get your modem connection up before clicking this button. Enter the SOYO CD Click the Enter SOYO CD button to enter the SOYO HTML database. The Start Up program will activate the default HT
Resumo do conteúdo contido na página número 19
5 Aureal Sound Driver Installation 5 Installation of the Aureal Sound drivers under Windows 95/98 SYSTEM REQUIREMENTS: 1. Access to Microsoft Windows 95 or Microsoft Windows 98 installationCD-ROM. 2. Good-quality speakers or headphones and connecting cables. 3. Joystick and MIDI keyboard for testing the gameport. Wavetable Memory Requirements: The Vortex hardware wavetable engine uses a native 4MB sample set. The samples are stored on hard disk and swapped to DRAM as required. The typical DRAM
Resumo do conteúdo contido na página número 20
Vortex Application Setup \driv-all\Aureal\A3DDemos Windows NT 4.0 Installation \driv-all\Aureal\WinNT40 Windows 2000 Installation \driv-all\Aureal\Win2000 UNINSTALLING WINDOWS 95/98 DRIVERS To uninstall the Vortex software, you can use the following procedure: 1. Open to the Windows 95/98 Device Manager (right-click on "My computer" and select "Properties"). 2. Open the "Multifunction Adapters" tree and select "Vortex Multifunction PCI Platform" 3. Press the "Remove" button at the bottom of th
