Manual do usuário Renesas RSKH8SX1582

Resumo do conteúdo contido na página número 1

1. Installation
Do not connect the E8 debugger hardware until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the RSK
directory from the CD root folder and double click on ‘setup.exe’.
2. The installer will ask you which language is to be used, please choose the appropriate one.
3. On the first screen of the installer proper, click .

Resumo do conteúdo contido na página número 2

Note: The Windows driver signing dialog may be displayed. Please accept the driver to continue. 3. HEW Workspace HEW integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on how to use HEW, open the HEW manual installed on your computer (Start Menu > Programs > Renesas > High-performance Embedded Workshop > Manual Navigator). 17. Launch HEW from the Start Menu. 18. In the “Welcome” dialog box: Verify “Create New Wor

Resumo do conteúdo contido na página número 3

39. If this is the first time you have connected to the RSK and all connections are correct then the connection will be completed, so go to step 41. 40. If the connection fails then you will be returned to the configuration screen. Click . Note: It is possible that a working HMon project is not programmed in to the device. Select “Download HMon using Boot Mode” and click . HMon will program the device in Boot mode and then swap back to User mode. A debug connection will