Manual do usuário Renesas M30280T-85LGF

Resumo do conteúdo contido na página número 1

M30280T-85LGF
Converter Board for 85-pin 0.65mm pitch TFLGA
User’s Manual

* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and LSPACK are
trademarks of Tokyo Eletech Corporation.

Keep safety first in your circuit designs!
Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with sem

Resumo do conteúdo contido na página número 2

1. Outline The M30280T-85LGF is a converter board for connecting M16C/Tiny Series including the emulation probe M3028BT-EPB, M30290T-EPB, and the compact emulator M3028BT2-CPE, M30290T2-CPE to a foot pattern for 85-pin 0.65mm pitch TFLGA (PTLG0085JB-A) of M16C/28 group. M30280T-85LGF CSSOCKET085B1007RE01 2. Package Components (See Figure 1) Figure 1 Package components of the M30280T-85LGF (1) M30280T-85LGF converter board 1 pc. (2) CSSOCKET085B1007RE01 (made by T

Resumo do conteúdo contido na página número 3

～ ～ ～ ～ 5. Connection Procedure (See Figure 3) Emulator M3028BT-EPB M30290T-EPB The procedure for connecting the M30280T-85LGF is outlined M3028BT2-CPE M30290T2-CPE below. M30280T-85LGF (2) (1) Connect the CSSOCKET085B1007RE01 to a foot pattern M30290T-PTCB on the user system. (2) Connect the M30290T-PTCB to the emulator. (3) (3) Connect the M30280T-85LGF to the CSSOCKET085B1007RE01 (included) CSSOCKET085B1007RE01. These corners are not round 85-pin 0.65mm pitch (PTLG0085JB-A)

Resumo do conteúdo contido na página número 4

8. Precautions CAUTION Note on connecting to the user system Caution is demanded, because attaching a converter board in the wrong direction may cause a fatal damage on the emulator or the user system. IMPORTANT Notes on Handling This Product: On the use of this product, prepare recommended foot pattern on the user system, and mount it with recommended metal mask with diameter (φ0.35mm) and 0.15mm thick. Create a hole for guide pin on the user system where CSSOKET085B1007R