Resumo do conteúdo contido na página número 1
GA-945P-DS3/S3
TM TM
®
Intel Core 2 Extreme dual-core / Core 2 Duo /
® ® ® ®
Intel Pentium D / Pentium 4 / Celeron D
LGA775 Processor Motherboard
User's Manual
Rev. 3301
12ME-945PDS3-3301R
* The WEEE marking on the product indicates this product must not be disposed of with user's other household waste
and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!
* The WEEE marking applies only in European Union's member states.
Resumo do conteúdo contido na página número 2
Motherboard GA-945P-DS3/GA-945P-S3 Motherboard GA-945P-DS3/ GA-945P-S3 Oct. 27, 2006 Oct. 27, 2006
Resumo do conteúdo contido na página número 3
Copyright © 2007 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
Resumo do conteúdo contido na página número 4
Table of Contents Item Checklist ................................................................................................................. 6 Optional Accessories ...................................................................................................... 6 GA-945P-DS3/GA-945P-S3 Motherboard Layout ......................................................... 7 Block Diagram .............................................................................................................
Resumo do conteúdo contido na página número 5
Chapter 3 Install Drivers ............................................................................................. 49 3-1 Install Chipset Drivers .................................................................................... 49 3-2 Software Applications ..................................................................................... 50 3-3 Driver CD Information .................................................................................... 50 3-4 Hardware Information .......
Resumo do conteúdo contido na página número 6
Item Checklist IDE Cable x 1 and FDD Cable x 1 SATA 3Gb/s Cable x 2 I/O Shield * The items listed above are for reference only, and are subject to change without notice. Optional Accessories 2 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-51/R) 4 Ports USB 2.0 Cable (Part Number: 12CR1-1UB030-21/R) SPDIF In and Out Cable (Part Number: 12CR1-1SPINO-11/R) e-SATA Cable (Part Number: 12CF1-3SATPW-11R) - 6 -
Resumo do conteúdo contido na página número 7
GA-945P-DS3/GA-945P-S3 Motherboard Layout CPU_FAN ATX_12V KB_MS LGA775 ATX ® AUDIO Intel 945P NB_FAN PCIE_3 RTL8111B PCIE_16 PWR_FAN PCIE_1 CLR_CMOS CODEC PCIE_2 ® Intel ICH7 BATTERY PCI1 SATAII0 SATAII2 BIOS PCI2 SATAII1 SATAII3 IDE1 PCI3 PWR_LED CI F_PANEL FDD CD_IN SPDIF_IO SYS_FAN F_USB1 F_USB2 - 7 - COMA USB USB LPT LAN IT8718 F_AUDIO GA-945P-DS3/GA-945P-S3 DDRII1 DDRII2 DDRII3 DDRII4
Resumo do conteúdo contido na página número 8
Block Diagram PCIe CLK (100 MHz) CPU CLK+/-(266/200/133 MHz) LGA775 Processor Host Interface (Note) DDRII 667 /533/400 MHz DIMM PCI Express x16 ® Dual Channel Memory Intel 945P LAN MCH CLK (266/200/133 MHz) RJ45 RTL8111B x1 BIOS PCI Express Bus ATA 33/66/100 x1 x1 x1 IDE Channel ® 4 SATA 3Gb/s Intel PCIe CLK ICH7 (100 MHz) 3 PCI Express x1 Floppy PCI Bus LPT Port IT8718 COM Port CODEC PS/2 KB/Mouse 8 USB Ports 3 PCI PCI CLK (33 MHz) (Note) To use a DDRII 667 memory module on the motherboard,
Resumo do conteúdo contido na página número 9
English Chapter 1 Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic
Resumo do conteúdo contido na página número 10
1-2 Feature Summary TM TM ® ® CPU LGA775 for Intel Core 2 Extreme dual-core/Core 2 Duo/Pentium D/ ® ® Pentium 4/Celeron D L2 cache varies with CPU Front Side Bus Supports 1066/800/533 MHz FSB ® Chipset Northbridge: Intel 945P Express Chipset ® Southbridge: Intel ICH7 LAN Onboard RTL8111B chip (10/100/1000 Mbit) Audio Onboard Realtek ALC888 chip Supports High Definition Audio Supports 2/4/6/8 channel audio Supports S/PDIF In/Out connection Supports CD In connection Storage ICH7 Southb
Resumo do conteúdo contido na página número 11
English Rear Panel I/O 1 PS/2 keyboard port 1 PS/2 mouse port 1 serial port 1 parallel port 4 USB 2.0/1.1 ports 1 RJ-45 port 6 audio jacks (Line In / Line Out / MIC In/Surround Speaker Out (Rear Speaker Out)/Center/Subwoofer Speaker Out/Side Speaker Out) I/O Control IT8718 chip Hardware Monitor System voltage detection CPU temperature detection CPU/System/Power fan speed detection CPU warning temperature CPU/System/Power fan failure warning CPU smart fan control BIOS 1 4 Mbit flas
Resumo do conteúdo contido na página número 12
1-3 Installation of the CPU and CPU Cooler Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat paste between the CPU and CPU cooler. 4. Please make sure the CPU cooler is installed
Resumo do conteúdo contido na página número 13
English 1-3-2 Installation of the CPU Cooler Male Push Pin The top of Female Push Pin Female Push Pin Fig.1 Fig. 2 Please apply an even layer of heat paste on the (Turning the push pin along the direction of arrow is to surface of the installed CPU. remove the CPU cooler, on the contrary, is to install.) Please note the direction of arrow sign on the male push pin doesn't face inwards before installation. (This instruction is only for Intel boxed fan) Fig. 3 Fig. 4 Place the CPU cooler atop the
Resumo do conteúdo contido na página número 14
1-4 Installation of Memory Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed in only o
Resumo do conteúdo contido na página número 15
English Dual Channel Memory Configuration The GA-945P-DS3/S3 supports the Dual Channel Technology. After operat- ing the Dual Channel Technology, the bandwidth of memory bus will double. The GA-945P-DS3/S3 includes 4 DIMM sockets, and each Channel has two DIMM sockets as following: Channel 0 : DDRII1, DDRII2 Channel 1 : DDRII3, DDRII4 If you want to operate the Dual Channel Technology, please note the following explanations due to the limitation of Intel chipset specifications. 1. Dual Channel m
Resumo do conteúdo contido na página número 16
1-5 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot bracket of
Resumo do conteúdo contido na página número 17
English 1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port (LPT) The parallel port allows connection of a printer, scanner and other peripheral devices. Serial Port (COMA) Connects to serial-based mouse or data processing devices. USB Port Before you connect your device(s) into USB connector(s), please make sure your device(s) such as
Resumo do conteúdo contido na página número 18
In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be connected to the default Mic In jack ( ) . Please refer to the 2-/4-/6-/8- channel audio setup steps for detailed software configuration information. 1-7 Connectors Introduction 1 3 6 2 12 5 17 18 9 8 16 13 14 4 7 15 10 11 1) ATX_12V 10) PWR_LED 2) ATX (Power Connector) 11) F_PANEL 3) CPU_FAN 12) F_AUDIO 4) SYS_FAN 13) CD_IN 5)
Resumo do conteúdo contido na página número 19
English 1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will
Resumo do conteúdo contido na página número 20
3/4/5) CPU_FAN / SYS_FAN / PWR_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin (only for CPU_FAN) power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FA
