Resumo do conteúdo contido na página número 1
8S661FXMP-RZ
® ®
Intel Pentium 4 Processor Motherboard
User's Manual
Rev. 1002
12ME-661FXMPRZ-1002
Copyright
© 2005 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherb
Resumo do conteúdo contido na página número 2
Mother Board 8S661FXMP-RZ Motherboard 8S661FXMP-RZ Oct. 22 ,2004 Oct. 22, 2004
Resumo do conteúdo contido na página número 3
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Ho
Resumo do conteúdo contido na página número 4
Table of Content Chapter 1 Introduction .................................................................................................... 5 Features Summary ..................................................................................................................... 5 8S661FXMP-RZ Motherboard Layout .......................................................................................... 7 Block Diagram .................................................................................
Resumo do conteúdo contido na página número 5
English Chapter 1 Introduction Features Summary ® ® CPU Socket 478 for Intel Pentium 4 (Northwood, Prescott) processor with HT Technology Supports 800/533/400MHz FSB L2 cache varies with processors ® Chipset North Bridge:SiS 661FX Chipset ® South Bridge:SiS 964 Memory 2 184-pin DDR slots Supports DDR400/DDR333/DDR266 DIMMs Supports up to 2GB (Max.) Slots 1 AGP slot 4X/8X (1.5V) device support 3 PCI slots IDE Connections 2 IDE connection (UDMA 33/ATA 66/ATA 100/ATA 133), allows conne
Resumo do conteúdo contido na página número 6
I/O Control IT8705AF Onboard SATA RAID Onboard SiS964 chipset - supports data striping (RAID 0) or mirroring (RAID 1) function - supports JBOD function - supports data transfer rate of up to 150 MB/s - supports hot plugging function - supports a maximum of 2 SATA connections Hardware Monitor CPU / System fan speed detection System voltage detection CPU temperature detection Additional Features Supports EasyTune 5 (only supports Hardware Monitor fucntion) Supports @BIOS Form Factor Micro-
Resumo do conteúdo contido na página número 7
English 8S661FXMP-RZ Motherboard Layout KB_MS CPU_FAN ATX FDD Socket 478 ATX_12V SiS 661FX F_AUDIO AUDIO AGP IDE2 IDE1 ICS1883 IT8705AF SYS _FAN PCI1 SiS 964 SATA1 BIOS PCI2 BAT CODEC CI SATA0 CLR_CMOS CD_IN PCI3 SUR_CEN SPDIF_IO F_PANEL F_USB1 F_USB2 PWR_LED - 7 - Introduction VGA USB COMA USB LPT LAN COMB 8S661FXMP-RZ DDR1 DDR2
Resumo do conteúdo contido na página número 8
Block Diagram Socket 478 CPUCLK+/- (100/133/200MHz) Processor AGP 4X/8X AGPCLK Host VGA Port 266/333/400MHz (66MHz) Interface DDR RAM SiS 661FX HCLK+/- (100/133/200MHz) 3 PCI 133MHz 33 MHz 14.318 MHz 48 MHz 2 Serial ATA BIOS SiS 964 Floppy LPC BUS IT8705AF ICS1883 LPT Port AC97 COM PCICLK CODEC 24 MHz Ports RJ45 (33MHz) 33 MHz ATA33/66/100/ 8 USB 133 IDE Ports Channels PS/2 KB/Mouse 8S661FXMP-RZ Motherboard - 8 - English MIC LINE-IN AC97 Link LINE-OUT
Resumo do conteúdo contido na página número 9
English Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Install I/O Peripherals cables Step 2 Step 4 Step 1 Step 4 Step 4 Step 3 Step 1: Install the Central Processing Unit (CPU) Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of
Resumo do conteúdo contido na página número 10
Step 1-1: CPU Installation Figure 1. Socket Pull the rod to the 90-degree directly. Actuation Lever Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then move the socket lever to the locked position while holding pressure on the center of the CPU. Step 1-2: CPU Cooling Fan Installation Figure 1. Apply the thermal tape(or grease) to provide better heat conduction between your CPU
Resumo do conteúdo contido na página número 11
English Step 2: Install memory modules Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recom- mended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be insta
Resumo do conteúdo contido na página número 12
Step 3: Install expansion cards 1. Read the related expansion card's instruction document before installing the expansion card into the computer. 2. Please make sure your AGP card is AGP 4X/8X (1.5V). 3. Please carefully pull out the small white drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot .Make sure your AGP card is locked by the small white- drawable bar. AGP Card St
Resumo do conteúdo contido na página número 13
English LAN Port The LAN port provides Internet connection. Line In Devices like CD-ROM, walkman etc. can be connected to Line In jack. Line Out (Front Speaker Out) Connect the stereo speakers, earphone or front surround channels to this connector. MIC In Microphone can be connected to MIC In jack. Step 4-2: Connectors Introduction 3 1 2 16 5 6 10 9 4 7 8 18 11 13 12 14 1715 1) ATX_12V 10) F_AUDIO 2) ATX 11) CD_IN 3) CPU_FAN 12) SPDIF_IO 4) SYS_FAN 13) SUR_CEN 5) FDD 14) F_USB1 / F_USB2 6) IDE1
Resumo do conteúdo contido na página número 14
1/2) ATX_12V/ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will not sta
Resumo do conteúdo contido na página número 15
English 4) SYS_FAN (System FAN Connector) This connector allows you to link with the cooling fan on the system case to lower the system temperature. Pin No. Definition 1 GND 1 2 +12V 3 Sense 5) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and 2.88Mbytes floppy disk types. The red stripe of the ribbon cable must be the same side with the Pin1. 33 34 1 2 6) IDE1/ IDE2 (IDE1/IDE2 Connector) Please connect first harddisk to IDE1 and
Resumo do conteúdo contido na página número 16
7) SATA0/SATA1 (Serial ATA Connector, Controlled by SiS964) Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. Pin No. Definition 1 GND 2 TXP 3 TXN 4 GND 1 7 5 RXN S_ATA 6 RXP (Control by SiS964) 7 GND For more detailed Serial ATA RAID setup information, please visit our website at http:\\www.gigabyte.com.tw. 8) F_PANEL (2x10 pins connector) Please connect the power LED, PC peaker, reset swi
Resumo do conteúdo contido na página número 17
English 9) BAT (Battery) CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn off the computer and unplug the power cord. 2. Remove the battery, wait for 30 seconds. 3. Re-install the battery. 4. Plug the power cord and turn on the computer. 10) F_AUDIO (Front Audio Panel Connector) If you want to us
Resumo do conteúdo contido na página número 18
11) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. Pin No. Definition 1 CD-L 2 GND 1 3 GND 4 CD-R 12) SPDIF_IO (SPDIF In/Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use SPDIF IN feature only when your device has digital output function.Be careful with the polarity of the SPDIF_IO connector. Chec
Resumo do conteúdo contido na página número 19
English 14) F_ USB1 / F_USB2 (Front USB Connectors) Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while you connect the F_USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional F_USB cable, please contact your local dealer. Pin No. Definition 1 Power 210 2 Power 1 9 3 USB DX- 4 USB Dy- 5 USB DX+ 6 USB Dy+ 7 GND 8 GND 9 No Pin 10 NC 15) CI (Chassis Intrusion, Case Open) This 2-p
Resumo do conteúdo contido na página número 20
17) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily short pins 1-2. Default doesn't include a jumper on pins 1-2 to prevent improper use of this header. Open: Normal 1 Short: Clear CMOS 1 18) PWR_LED PWR_LED is connected with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color. Pin No. Definition 1 M
