Resumo do conteúdo contido na página número 1
AR-B1760
®
Socket 479 Pentium M
®
Intel 855GME 5.25” SBC
USER’S MANUAL
Version 1.0
Resumo do conteúdo contido na página número 2
Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. ii AR-B1760 User’s Manual
Resumo do conteúdo contido na página número 3
Table of Contents Introduction .......................................................1 Product Description.............................................................1 Checklist..............................................................................2 AR-B1760 Specifications....................................................3 Board Dimensions...............................................................4 Installations .......................................................5
Resumo do conteúdo contido na página número 4
This page is intentionally left blank. iv AR-B1760 User’s Manual
Resumo do conteúdo contido na página número 5
INSTALLATIONS Introduction Product Description ® The AR-B1760 Pentium M 5.25” embedded board incorporates the ® Intel advanced 855GME Chipset that supports processors from 600MHz to 2.0MHz in both 478 or 479-ball Micro-FCBGA package with a front size bus of 400MHz. Graphics display functionality is provided by the integrated-chipset VGA controller that supports CRT display and LVDS interface with 24-bit panel specifications. Ethernet connectivity comes from the ICH4-integrated Et
Resumo do conteúdo contido na página número 6
INSTALLATIONS Checklist Your AR-B1760 package should include the items listed below. • The AR-B1760 Pentium M embedded board • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Optional cables such as: • 1 Slim FDD Ribbon Cable • 1 Audio Cable • 2 IDE Ribbon Cables (40-pin & 44-pin) • 1 COM Port Cable • 1 Printer Port Cable • 1 PS/2 Keyboard/Mouse Cable • 1 VGA Cable • 1 DVI Cable • 1 SATA Cable • 1 USB Cable 2 AR-B1760 User’s Manual
Resumo do conteúdo contido na página número 7
INSTALLATIONS AR-B1760 Specifications Form Factor 5.25-inch Disk-Size ® Intel Pentium M Processor, Ultra Low Voltage, at HFM CPU Type core frequency of 600 MHz ~ 2.0GHz, 478 or 479-ball Micro-FCBGA Package CPU Voltage 0.700V~1.708V 600MHz~2.0GHz System Speed 400MHz CPU Frequency APM1.2 Green /APM ® Chipset Intel 82855GME Chipset GMCH: 82855GME, 732-pin Micro-FCBGA ICH4: 82801DB, 421-pin BGA, FWH Award BIOS, supports ACPI function BIOS Cache 1M Level 2 cache ® VGA
Resumo do conteúdo contido na página número 8
INSTALLATIONS Board Dimensions 4 AR-B1760 User’s Manual
Resumo do conteúdo contido na página número 9
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the AR-B1760 in order to set up a workable system. The topics covered are: Installing the CPU ...............................................................6 Installing the Memory .........................................................7 Setting the Jumpers .............................................................8 Connectors on AR-B1760 ....................................
Resumo do conteúdo contido na página número 10
INSTALLATIONS Installing the CPU The AR-B1760 embedded board supports a Socket 479 processor socket ® ® ® for Intel Pentium M or Celeron M processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before inserting the processor. Place the processor into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once the processor has slide into the
Resumo do conteúdo contido na página número 11
INSTALLATIONS Installing the Memory The AR-B1760 embedded board supports two DDR memory sockets for a maximum total memory of 2GB in DDR memory type. The memory module capacities supported are 64MB, 128MB, 256MB, 512MB and 1GB. The following table lists the supported DDR DIMM configurations. Intel 855GME supports configurations defined in the JEDEC DDR DIMM specification only (A,B,C). Non-JEDEC standard DIMMs such as double-sided x16 DDR SDRAM DIMMs are not supported. Supported
Resumo do conteúdo contido na página número 12
INSTALLATIONS Setting the Jumpers Jumpers are used on AR-B1760 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on AR-B1760 and their respective functions. Jumper Locations on AR-B1760 .................................................... 9 Configuring the CPU Frequency .................................................. 10 JP1: LVDS
Resumo do conteúdo contido na página número 13
INSTALLATIONS Jumper Locations on AR-B1760 Jumpers on AR-B1760 ..............................................................Page Configuring the CPU Frequency.................................................. 10 JP1: LVDS Panel Power Select.................................................... 10 JP2: Gigabit LAN Enable/Disable................................................ 10 JP3: Compact Flash Slave/Master ................................................ 10 JP4: Clear CMOS Content
Resumo do conteúdo contido na página número 14
INSTALLATIONS Configuring the CPU Frequency The AR-B1760 embedded board does not provide DIP switches to configure the processor speed (CPU frequency). JP1: LVDS Panel Power Select JP1 LVDS Panel Power 3.3V (default) 5V Note: The LVDS panel resolution can be configured in the BIOS Setup. JP2: Gigabit LAN Enable/Disable JP2 Gigabit LAN Enable Disable JP3: Compact Flash Slave/Master JP3 Compact Flash Slave Open Master Close 10 AR
Resumo do conteúdo contido na página número 15
INSTALLATIONS JP4: Clear CMOS Contents Use JP4 to clear the CMOS contents. Note that the ATX-power connector should be disconnected from the board before clearing CMOS. JP4 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP5, JP6, JP7: RS232/422/485 (COM2) Selection COM1, COM3, and COM4 are fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following table describes the jumper settings for C
Resumo do conteúdo contido na página número 16
INSTALLATIONS JP9: COM2 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP9 Signal Name 1 RI +12V 2 3 RI (default) RI (default) 4 5 RI +5V 6 COM2 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 short = standard COM port JP10: COM3 RS232 +5V / +12V Power Setting Pin # Pin # Signal Name JP10 Signal Name 1 RI +12V 2 3 RI (default) RI (default) 4 5 RI +5V 6 COM3 Settings: Pin 1-2 short = +12V, Pin 5-6 short = +5V, Pin 3-4 short = standard COM port
Resumo do conteúdo contido na página número 17
INSTALLATIONS JP16: Processor Operating Frequency JP16 CPU FSB 133MHz Open 100MHz Close AR-B1760 User’s Manual 13
Resumo do conteúdo contido na página número 18
INSTALLATIONS Connectors on AR-B1760 The connectors on AR-B1760 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on AR-B1760 and their respective functions. Connector Locations on AR-B1760 ............................................. 15 FAN1, FAN2: System Fan Power Connector............................... 16 FAN3: CPU Fan Power Connector..........................
Resumo do conteúdo contido na página número 19
INSTALLATIONS Connector Locations on AR-B1760 Connectors on AR-B1760.....................................................................Page Connector Locations on AR-B1760.......................................................................... 15 FAN1, FAN2: System Fan Power Connector........................................................... 16 FAN3: CPU Fan Power Connector........................................................................... 16 IDE1, IDE2: EIDE Connectors.
Resumo do conteúdo contido na página número 20
INSTALLATIONS FAN1, FAN2: System Fan Power Connector FAN1, FAN2 is a 3-pin header for system fans. The fan must be a 12V (500mA) fan. Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection FAN3: CPU Fan Power Connector FAN3 is a 3-pin header for the CPU fan. The fan must be a 12V fan. Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection IDE1, IDE2: EIDE Connectors IDE1: Primary IDE Connector Signal Name Pin # Pin # Signal Name R
