Resumo do conteúdo contido na página número 1
7VM333M-RZ
™ ™ ™ ™
AMD Sempron /Athlon /Athlon XP/Duron Socket A Processor Motherboard
User's Manual
Rev. 1004
12ME-VM333MRZ-1004
Copyright
© 2004 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in
any from without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respec tive owners.
Notice
Please do not remove any labels on motherboard, this may vo
Resumo do conteúdo contido na página número 2
Mother Board 7VM333M-RZ Motherboard 7VM333M-RZ Mar. 17 ,2004 Mar. 17, 2004
Resumo do conteúdo contido na página número 3
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions when- ever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3.
Resumo do conteúdo contido na página número 4
Table of Contents Chapter 1 Introduction ..............................................................................................5 Features Summary ........................................................................................................................ 5 7VM333M-RZ Motherboard Layout.............................................................................................. 6 Block Diagram ..................................................................................
Resumo do conteúdo contido na página número 5
English Chapter 1 Introduction Features Summary ™ ™ ™ ™ CPU Socket A for AMD Sempron /Athlon XP / Athlon / Duron processor 200/266/333MHz FSB Supports 1.4GHz and faster Chipset Northbridge : VIA KM 266 Pro Southbridge : VIA VT8235/VT8237R Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR333/DDR266/DDR200 DIMM Supports only 2.5V DDR DIMM Slots 1 AGP slot supports 4X(1.5V) mode 3 PCI slots On-Board IDE 2 IDE controller provide IDE HDD/CD-ROM(IDE1,
Resumo do conteúdo contido na página número 6
7VM333M-RZ Motherboard Layout 22.3 cm KB_MS CPU_FAN SOCKET A VIA KM266 Pro IT8705 BIOS SYS_FAN F_AUDIO CLR_CMOS AGP PCI1 VIA VT8235/ VT8237R PCI2 JP 1 CD_IN PCI3 BAT CODEC F_PANEL F_U SB1 F_U SB2 GAME PWR_LED SUR_CEN COMB SPDIF 7VM333M-RZ Motherboard - 6 - English MIC_IN VGA USB COMA LINE_OUT LPT LINE_IN LAN VT6103 7VM333M-RZ DDR1 DDR2 IDE1 ATX FDD IDE2 24.4 cm
Resumo do conteúdo contido na página número 7
English Block Diagram TM CPUCLK+/- (100/133/166MHz) AMD-K7 Host CPU AGP 4X System Bus VGA Port 200/266/333Hz FSB 200/266/333MHz DDR VIA HCLK+/- (100/133/166MHz) KM266 Pro AGPCLK NBGCLK66 MHz 66MHz 33 MHz 14.318 MHz 3 PCI VT6103 48 MHz BIOS PCI BUS 33MHz VIA Game Port LPC BUS VT8235/VT8237R Floppy IT8705 LPT Port 2 COM Ports 24 MHz 33 MHz ATA33/66/ 6 Channel 6 USB 100/133 CODEC Ports PS/2 KB/Mouse IDE Channels PCICLK (33MHz) PCICLK (33MHz) HCLK+/- (100/133/166MHz) CLK USBCLK (48MHz) CPUCLK+/- (10
Resumo do conteúdo contido na página número 8
Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Set System Jumper (JP1) Step 2- Install the Central Processing Unit (CPU) Step 3- Install Memory Modules Step 4- Install Expansion Cards Step 5- Install I/O Peripherals Cables Step 2 Step 3 Step 5 Step 5 Step 4 Step 1 Step 1: Set System Jumper (JP1) The system bus frequency can be switched at 100/133/166MHz by adjusting system jumper (JP1). (The internal frequency depend on CPU.) Short: 100MHz 1
Resumo do conteúdo contido na página número 9
English Step 2: Install the Central Processing Unit (CPU) Before installing the processor, adhere to the following warning: 1. Please make sure the CPU type is supported by the motherboard. 2. The processor will overheat without the heatsink and/or fan, resulting in permanent irreparable damage. 3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper installation. Please change the insert orientation. 4. Apply thermal grease between the processor and cooling fan
Resumo do conteúdo contido na página número 10
Step 3: Install Memory Modules Before installing the memory modules, adhere to the following warning: 1. Please note that the DIMM module can only fit in one direction due to the one notch. Wrong orientation will cause improper installation. Please change the insert orientation. The m otherboard has 2 dual inline m emory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM module can
Resumo do conteúdo contido na página número 11
English Step 4: Install AGP Card 1. Read the relate AGP card's instruction document before install the AGP card into the computer. 2. If your AGP card has "AGP 4X(1.5V) notch"(show below), please make sure your AGP card is AGP 4X(1.5V). 3. Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install/ uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot. Make sure your AGP card is locked by the sma
Resumo do conteúdo contido na página número 12
| Line Out jack Connect the stereo speakers or earphone to this connector. } MIC In jack Microphone can be connect to MIC In jack. After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In" jack and con- nect "Center/Subwoofer" to "M IC In" jack. Step 5-2: Connectors Introduction 2 1 4 5 8 3 15 11 16 9 10 12 13 14 6 7 1) ATX 9) SUR_CEN 2) CPU_FAN 10) SPDIF 3
Resumo do conteúdo contido na página número 13
English 1) ATX (ATX Power) AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. Pin No. Definition Pin No. Definition 1 11 1 3.3V 11 3.3V 2 3.3V 12 -12V 3 GND 13 GND 4 VCC 14 PS_ON(soft on/off) 5 GND 15 GND 6 VCC 16 GND 7 GND 17 GND 8 Power Good 18 -5V 9 5V SB (stand by +5V) 19 VCC 2 0 1 0 10 +12V 20 VCC 2) CPU_FAN (CPU Fan Connector) Please note, a proper installation of the CPU cooler is essentia
Resumo do conteúdo contido na página número 14
4) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and 2.88M bytes floppy disk types. The red stripe of the ribbon cable m ust be the sam e side with the Pin1. 3 4 3 3 2 1 5) IDE1 / IDE2 (IDE1 / IDE2 Connector) Please connect first hard disk to IDE1 and connect CD-ROM to IDE2. The red stripe of the ribbon cable m ust be the sam e side with the Pin1. 4 0 3 9 2 1 IDE2 IDE1 6) PWR_LED PWR_LED is connect with the system power indicator
Resumo do conteúdo contido na página número 15
English 7) F_PANEL (2 x 10 pins Connector) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below. Me ssa ge LED/Powe r/ So ft Power Sle ep L ED Conne ctor Spe aker Connector ID E Hard Di sk Re set Switch Acti ve L ED HD (IDE Hard Disk Active LED) Pin 1: LED anode(+) Pin 2: LED cathode(-) SPK (Speaker Connector) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(-) RES (Reset Switch) Open: No
Resumo do conteúdo contido na página número 16
9) SUR_CEN (Surround Center Connector) Please contact your nearest dealer for optional SUR_CEN cable. Pin No. Definition 1 2 1 SUR OUTL 2 SURO UTR 5 6 3 GND 4 No Pin 5 CENTER_OUT 6 BASS_OUT 10) SPDIF (SPDIF Out Connector) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Be careful with the polarity of the SPDIF connector. Check the pin
Resumo do conteúdo contido na página número 17
English 12) COMB (COM B Connector) Be careful with the polarity of the COMB connector. Check the pin assignm ent carefully while you connect the COMB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional COMB cable, please contact your local dealer. Pin No. Definition 1 NDCDB- 2 NSINB 2 1 0 3 NSOUTB 1 9 4 NDTRB- 5 GND 6 NDSRB- 7 NRTSB- 8 NCTSB- 9 NRIB- 10 No Pin 13) GAME (Game Connector) This connector supports joystick, M
Resumo do conteúdo contido na página número 18
15) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily shor 1- 2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper. 1-2 close: Clear CMOS 1 Open: Normal 1 16) BAT (Battery) + CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type rec- ommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you wan
Resumo do conteúdo contido na página número 19
English Chapter 2 BIOS Setup BIOS Setup is an ov erv iew of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This ty pe of information is stored in battery -backed CM OS RAM so that it retains the Setup information w hen the pow er is turned off. ENTERING SETUP Pow ering ON the computer and pressing immediately w ill allow y ou to enter Setup. If y ou require more adv anced BIOS settings, please go to "Adv anced BIOS" setting menu. To enter A
Resumo do conteúdo contido na página número 20
If you can't find the setting you want, please press "Ctrl+F1" to search the advanced option hidden. • Standard CMOS Features This setup page includes all the items in standard c ompatible BIOS. • Advanced BIOS Features This setup page includes all the items of Aw ard special enhanced features. • Integr ated Peripherals This setup page includes all onboard peripherals. • Power Management Setup This setup page includes all the items of Green function features. • PnP/PCI Configur ation This setup
